Bay Bay Linear
Ins Inspire the Linear Power
1.5A High Current Low Dropout
Voltage Regulator Adjustable & Fix Output
B29150
Preliminary Information
Description
The Bay Linear B29150 is a 1.5A high accuracy, low dropout voltage regulator with only 350mV(Typ.)@ 1.5A). The B29150 is designed for low voltage a application that requires lower dropout voltage and faster transient response. This device is an excellent choice for use in powering low voltage microprocessor that require a lower dropout, faster transient response to regulate from +2.5V to 3.8V supplies and as a post regulator for switching supplies applications. The B29150 offers full protection against over-current faults, reversed input polarity, reversed load insertion, and positive and negative transient voltage. On-Chip trimming adjusts the reference voltage to 1%. Features such as Enable pin, Error Flag pin are also included in the 5 pin packages. The B29150 is offer in a new LPDD (Low Profile TO-263) package from 4.47 mm (DD) tickness down to only 1.27 mm (LPDD) total tickness. The B29150 are offered in a 3 & 5-pin TO-220 & TO-263 package compatible with other 3 terminal regulators. For a 3A low dropout regulator refer to the B39300 data sheet.
Features
• • • • • • • • • Adjustable & Fix Output 1% output accuracy @2.5V, 3.3V, @ 5.0V Output Current of 1.5A Low Dropout Voltage of 350mV @ 1.5A Extremely Tight Load & Line Regulation Reverse-battery and “Load Dump” Protection Zero Current Shutdown Mode (5-pin version) Error Flag Signal Output-of-Regulation (5-pin version) Offer in TO-263, TO-220, & New Slim LPDD Similar to industry Standard MIC29150
•
Applications
• • • • • • Powering VGA & Sound Card LCD Monitor USB Power Supply SMPS Post Regulator High Efficiency ”Green” Computer System Adjustable Power Supply
Pin Connection
Ordering Information
Devices
B29150T B29151/2/3T B29150S B29151/2/3S B29150J B29151/2/3J
TO-220-3 Package
Package
TO-220-3 TO-220-5 TO-263-3 TO-263-5 LPDD-3 LPDD-5
TO-220-5 Package
Temp.
-40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C
TO-263-3 Package
TO-263-5 Package
BAY B29150 1 2 3
BAY B29151/52/53 1 2345
B29151 1) ENABLE 2) INPUT 3) GND 4) OUTPUT 5) FLAG
B29152 1) ENABLE 2) INPUT 3) GND 4) OUTPUT 5) ADJUST
B29153 1) FLAG 2) INPUT 3) GND 4) OUTPUT 5) ADJUST
BAY B29150
BAY
B29151/52/53
B29151 1) ENABLE 2) INPUT 3) GND 4) OUTPUT 5) FLAG
B29152 1) ENABLE 2) INPUT 3) GND 4) OUTPUT 5) ADJUST
B29153 1) FLAG 2) INPUT 3) GND 4) OUTPUT 5) ADJUST
VIN
GND V OUT
Front View
Top View
1 2 34 5 VIN GND VOUT
Top View
Front View
Bay Linear, Inc
2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 989-7144, Fax: (925) 940-9556
www.baylinear.com
B29150
ABSOLUTE MAXIMUM RATINGS
Lead Temp. (Soldering, 5 Seconds) ................................ 260°C Storage Temperature Range .............................. -65° to +150°C Operating Junction Temperature Range B29150/51/52/53 Control Section ............. -45°C +125°C B29150/51/52/53 Power Transistor ............-45°C +150°C Input Voltage........................................................ 26V Maximum Output Current ................................... 3.5A Input Supply Voltage (Note1) (Survival)-20V to +60V
ELECTRICAL CHARACTERISTICS (NOTE 1) at IOUT = 10mA, Ta=25°C, unless otherwise specified.
PARAMETER
2.5V Version
CONDITIONS
IOUT = 10mA 10mA ≤IOUT≤1.5A, 4.75V≤VIN ≤26V IOUT = 10mA 10mA ≤IOUT≤1.5A, 4.75V≤VIN ≤26V IOUT = 10mA 10mA ≤IOUT≤1.5A, 5.5V≤VIN ≤26V IO = 10mA, (VOUT + 1V) ≤ VIN≤ 26V VIN = VOUT + 5V, 10mA ≤ IOUT≤ IFULLLOAD (Note 2, 6) Output Voltage (Note 6) Temperature Coef.
Typ
2.5 2.5 3.3 3.3 5.0 5.0 0.06 0.2 20 80 220 350 8 25 0.9 1.7 400 260 1.240
B29150/51/52/53 Min Max
2.475 2.450 3.267 3.234 4.95 4.90 2.525 2.550 3.330 3.366 5.05 5.10 0.5 1 100 200
Units
V
Output Voltage (Note 2)
3.3V Version2.
Output Voltage (Note 2)
5.0V Version
V
Output Voltage (Note 2)
All Voltage Options
V
Line Regulation Load Regulation ∆V ° ∆T Dropout Voltage
% % ppm/°C mV
IO = 100mA IO = 750mA IO = 1.5A
600 20 mA mA 1.5 A µV RMS
Ground Current IGNDDO Ground Pin Current at Dropout Current Limit Output Noise Voltage (10Hz to 100kHz) IL = 100mA Reference Voltage Reference Voltage Adjust Pin Bias Current Reference Voltage Temperature Coefficient Adjust Pin Bias Current Temperature Coefficient Output Leakage Current Output Low Voltage
IO = 750mA, VIN = VOUT, +1V IO = 1.5A
VIN = 0.5V less than specified VOUT IOUT = 10mA VOUT = 0V (Note 4) CL = 10µF CL = 33µF
1.228 1.215 1.203
1.252 1.265 1.277 80 120
V V nA ppm/°C
(Note 8)` 40 (Note 7) 20
0.1
nA/°C
Flag Output (Error Comparator) B29152/53
VOH = 26V Device set for 5V. VIN = 4.5V IOL = 250µA 0.01 220 1.00 2.00 300 400 µA mV
Bay Linear, Inc
2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 989-7144, Fax: (925) 940-9556
www.baylinear.com
B29150
Upper Threshold Voltage Lower Threshold Voltage Hysteresis
Device set for 5V (Note 9) Device set for 5V (Note 9) Device set for 5V (Note 9) 60 75 15 40 25 95 140 mV mV mV V 0.8 2.4 VEN = 26V VEN = 0.8V 100 600 750 2.5 5 500 V µA µA
ENABLE Input B29152/53
Input Logic Voltage Low (OFF) High (ON)
Enable Pin Input Current Regulator Output Current in Shutdown
(Note 10)
10
NOTES:
The Bold specifications apply to the full operating temperature range. Note 1: Maximum positive supply voltage of 60V must be of limited duration (
很抱歉,暂时无法提供与“B29150S”相匹配的价格&库存,您可以联系我们找货
免费人工找货