B6B-EH-A

Crimp EH CONNECTOR Disconnectable Crimp style connectors • Compact and slim 3.8mm (.150") wide. Radial Tape 2.5mm (.098") pitch Features –––––––––––––––––––––––– This connector is designed to be compact and unusually thin. It measures only 8.1mm (.319") high after mounting and is just • Highly reliable contact The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying. • Polarizing guides The header and housing have guides to prevent improper mating. • Whisker prevention The contact material is treated with a reflow process, and the square post is copper-undercoated and tin/lead-plated for whisker prevention. This, the thinnest, 2.5mm (.098") pitch connector, is 8.1mm (.319") in height after mounting and 3.8mm (.150") in width. It is designed to meet the demand for the highdensity connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. • Easy and effective crimping Although the contact is compact, it has a long wire strip length, 2.6±0.4mm (.102"±.016"). This long length is very useful for automatic crimping and when crimping shielded wires. Specifications ––––––––––––––––––– JST 2 3 4 5 B • Current rating: 3A AC, DC (AWG#22) • Voltage rating: 250V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 800V AC/minute • Applicable wire: AWG #32 to #22 • Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063") * Contact JST for details. Standards –––––––––––––––––––––– 0 1 2 Recognized E60389 Certified LR20812 R75089 51 EH CONNECTOR Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Model No. 5.7(.224) 2.85(.112) 2.05(.081) 1.1(.039) 2.0(.079) mm2 0.05 to 0.3 0.032 to 0.08 Applicable wire Q'ty / AWG # Insulation O.D. mm(in.) reel 30 to 22 32 to 28 1.0 to 1.9(.039 to .075) 0.5 to 1.1(.020 to .043) 10,000 SEH-001T-P0.6 SEH-003T-P0.6L Material and Finish Phosphor bronze, tin-plated 1.6(.063) Note: 1. Contact JST for gold-plated contacts. ¨ 2. SEH-003T-P0.6L is not TUV approved. Housing ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2 B A Model No. EHR- 2 EHR- 3 EHR- 4 EHR- 5 EHR- 6 EHR- 7 EHR- 8 EHR- 9 EHR-10 EHR-11 EHR-12 EHR-13 EHR-14 EHR-15 Dimensions mm(in.) A 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .866) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) B 7.0( .276) 9.5( .374) 12.0( .472) 14.5( .571) 17.0( .669) 19.5( .768) 22.0( .866) 24.5( .965) 27.0(1.063) 29.5(1.161) 32.0(1.260) 34.5(1.358) 37.0(1.457) 39.5(1.555) Q'ty / bag 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 0.6 (.024) 2.25 (.089) 2.5(.098) 3 3.8(.150) 4 5 6 7 1 2 3 6 7 6.5(.256) JST 8 9 10 Circuit No.1 0.7 (.028) 11 12 13 14 15 Material Nylon 66, UL94V-0, natural (white) As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. EHR-2-o o(blank)…natural (white) K…black R…red TR…tomato red E…blue Y…yellow L…lemon yellow M…green O…orange N…brown PL…purple PK…pink H…gray LE…light blue FY…vivid yellow 52 EH CONNECTOR Shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors. Top entry type (2 circuits) 6.0(.236) 3.3(.130) Model No. B 3.8(.150) Dimensions mm.(in) A 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .866) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) Q'ty / box Top entry type 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 250 250 250 Circuits 2 3 4 5 Top entry type B 2B-EH-A B 3B-EH-A B 4B-EH-A B 5B-EH-A B 6B-EH-A B 7B-EH-A B 8B-EH-A B 9B-EH-A B10B-EH-A B11B-EH-A B12B-EH-A B13B-EH-A B14B-EH-A B15B-EH-A Side entry type S 2B-EH S 3B-EH S 4B-EH S 5B-EH S 6B-EH S 7B-EH S 8B-EH S 9B-EH S10B-EH S11B-EH S12B-EH S13B-EH S14B-EH S15B-EH B 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 37.5(1.476) 40.0(1.575) Side entry type 1,000 1,000 1,000 1,000 500 500 500 500 500 250 250 250 250 250 3.2(.126) 0.64 (.025) A Circuit No.1 1.6(.063) 6 7 8 9 2.5(.098) (3 to 15 circuits) 3.8(.150) 10 11 12 6.0(.236) 3.3(.130) 13 5.1(.201) 14 15 3.2(.126) Material and Finish Post: Brass, copper-undercoated, tin/lead plated Wafer: Nylon 66, UL94V-0, natural (white) Circuit No.1 2.5 2.5 (.098) (.098) 0.64 (.025) A B 1.6(.063) Note: 1. Also available and identified as model BxxB-EH is a top entry type having a post extension length of 4.0mm(.157") ¨ 2. Top entry type headers are not TUV approved. As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 6.7(.264) Side entry type 4.2(.165) 4.0(.157) 6.0(.236) 2.2 (.087) 5.2(.205) ex. B2B-EH-A-o o(blank)…natural (white) K…black R…red E…blue Y…yellow M…green S2B-EH-o o(blank)…natural (white) K…black R…red TR…tomato red E…blue Y…yellow L…lemon yellow M…green O…orange N…brown P…purple PK…pink H…gray LE…light blue FY…vivid yellow Circuit No.1 2.5 (.098) 2.5 (.098) A B 0.64 (.025) 3.2 (.126) ex. PC board layout (viewed from soldering side) and Assembly layout ––––––––––––––––––– Top entry type 0.6(.024) 2.5±0.05 2.5 (.098±.002) (.098)min. 2.2 (.087)min. 3.8 (.150) Side entry type 2.5±0.05 (.098±.002) 1.9 (.074)min. 6.7 (.264)min. 10.3(.406) 8.2(.323) 4.2 (.165) 7.5(.295) 0.1 0.9 + 0 (.035 +.004)dia. 0 0.1 0.9 + 0 (.035 +.004 )dia. 0 Note: 1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR-4 are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 53 EH CONNECTOR Shrouded header on radial-tape ––––––––––––––––––––––––––––––––––––––––––––– •The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors . ¨ •Shrouded headers on radial-tape are not TUV approved. TS type (2 circuits) 7.5(.295) 2.5(.098) 5.4(.213) [1.0(.039)] 6.5 1.5(.059) (.255) 4.4 (.173) 2.2(.087) Circuits 2 3 4 5 6 7 Model No. B2B-EH-TS B3B-EH-TS B4B-EH-TS B5B-EH-TS B6B-EH-TS B7B-EH-TS B8B-EH-TS Dimensions mm(in.) A 5.0(.197) 7.5(.295) 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) B 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) 20.0(.787) 22.5(.886) Q'ty / box 1,400 1,400 700 700 700 700 700 0.64(.025) dia. 8 Material and Finish Pin: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-EH-TS-o o(blank)…natural (white) K…black R…red E…blue Y…yellow M…green N…brown (3 to 8 circuits) 2.5(.098) 2.5(.098) B A 0.64(.025) dia. [1.0(.039)] 1.5(.059) 2.8(.110) 6.5(.256) 5.6(.220) 4.4 (.173) 2.2(.087) 0.64(.025) dia. TV4 type 2.5(.098) 2.5(.098) B A 0.64(.025) 2.8(.110) 6.5(.256) 5.6(.220) 4.4 (.173) 2.2(.087) Circuits 3 4 5 6 7 Model No. B3B-EH-TV4 B4B-EH-TV4 B5B-EH-TV4 B6B-EH-TV4 B7B-EH-TV4 B8B-EH-TV4 Dimensions mm(in.) A 5.0(.197) 7.5(.295) 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) B 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) 20.0(.787) 22.5(.886) Q'ty / box 1,400 700 700 700 700 700 [0.7(.028) dia.] [0.7(.028) dia.] 8 Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) 54 EH CONNECTOR Taping specifications –––––––––––––––––––––––––––––––––––––––––––––––––––––– 2 and 3 circuits: 12.7(.500) 4 to 8 circuits: 25.4(1.000) 20.0(.787) 9.0(.354) 6.0 (.236) 18.0(.709) 2circuits: 2.5(.098) 3 to 8 circuits: 5.0(.197) 12.7(.500) 4.0 (.157)dia. 2circuits: 5.1(.201) 3 to 8 circuits: 3.85(.152) Note: Conforms to JIS C0825. Packaging specifications ––––––––––––––––––––––––––––––––––––––––––––––––––– D Distance between the end of the tape and the first connector's center line (either end) Tail tape H TERMIN ALS & CONN ECTORS Lead tape R W Package type Distance between folds Box size Distance between the end of the tape and the first connector´s center line (either end) Flat pack (zigzag folded) 24 indexing holes per fold (304.8mm/12") (316x45x330mm)12.4"(W)x1.8"(D) x13.0"(H) 19.05mm(.750") PC board layout (viewed from soldering side) and Assembly layout ––––––––––––––––––– 2.5±0.05 2.5 (.098±.002) (.098)min. 2.2 (.087)min. 4.4 (.173) 0.1 0.9 + 0 .004 (.035 +0 )dia. Note: 1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR-4 are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 6.5(.256) 8.6(.339) 55 55 EH CONNECTOR Applicator for the semi-automatic press AP-K2N ––––––––––––––––––––––––––––––– Contact SEH-001T-P0.6 SEH-003T-P0.6L Crimp applicator MKS-L(-10) with safety cover without safety cover APLMK SEH001-06 APLMK SEH003-06 APLNC SEH001-06 APLNC SEH003-06 Compact crimp applicator MKS-LS with safety cover without safety cover APLMKLS SEH001-06 – APLLSNC SEH001-06 – Strip-crimp applicator MKS-SC with safety cover APLSC SEH001-06 APLSC SEH003-06 56