BHLR-02VS

Crimp BHL CONNECTOR Disconnectable Crimp style connectors • Contact lances voltage. Emboss Tape 2.3mm (.091") pitch Features ––––––––––––––––––––––– Contacts are secured in the housing by their spring action, thus fully shrouded. This helps improve the withstanding • Anti-misinsertion housing The housing has mis-insertion preventive guides on both sides. Housing locks prevent release of the housing that might result from vibration or shock. Low profile connector with high withstanding voltage, designed for connecting liquid crystal display backlight lamps to their starters. The BHL connector is 2.8mm (.110") thick, so the mounting height is only 3mm (.118"). Specifications –––––––––––––––––– • Current rating: 1.0A AC, DC • Voltage rating: 1,400V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 3,800V AC/minute • Applicable wire: Conductor/AWG #28 to #24 Insulation O. D./0.9 to 1.7mm(.035" to .067") * Contact JST for details. H JS T BHL 35 BHL CONNECTOR Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Model No. SBHL-002T-P0.5 5.75(.226) 0.9 1.3 (.035) (.051) 2.45 (.096) 0.85(.033) 1.5(.059) mm2 0.08 to 0.22 Applicable wire Q’ty / reel AWG # Insulation O.D. mm(in.) 28 to 24 0.9 to 1.7(.035 to .067) 10,000 Material and Finish Phosphor bronze, tin-plated 1.2 (.047) Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2 7.5(.295) H JST Model No. BHLR-02VS Meterial Thermosetting resin, UL94V-0, black Q'ty / bag 1,000 2.8(.110) 8.5(.335) 2.3 (.091) 6.8(.268) 2.2 (.087) Shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2 Model No. SM02B-BHLS-1-TB Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Heat resistant resin, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin/lead-plated Q’ty / reel 1,500 10.9(.429) 7.5(.295) 2.3(.091) 2.8 (.110) H JST Note: The products listed above are supplied on embossed-tape. 36 BHL CONNECTOR Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––– Feeding direction Feeding direction Carrier tape 100(3.937)dia. 380±2.0(14.961±.079)dia. Cover tape leader area Lead tape 20 vacancies min. Tail tape 40.0(1.575)min. Connetor loaded area 400(15.748)min. [13.0(.512)dia.] 25.5+2.5 - 1.0 (1.004 -+.098 ) .039 2.0±0.5(.079±.020) 7.5±0.1 (.295±.004) 1.75±0.1(.069±.004) 16.0±0.1(.630±.004) 1.55±0.05 (.061±.002)dia. 4.0±0.1 2.0±0.1 (.157±.004) (.079±.004) Cover tape 16.0±0.1(.630±.004) 0.3±0.05(.012±.002) Carrier tape Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. PC board layout (viewed from component side) and Assembly layout –––––––––––––––––– Solder tab 0.2 (.008 + 0.1 0 +.004 0 Solder tail + 0.1 0 +.004 0 1.7 ) (.067 ) 0.8+0.1 0 (.031+.004 ) 0 12.3(.484) 0.1 1.0+ 0 (.039+.004 ) 0 0.3±0.05 (.012±.002) 6.5±0.05 (.256±.002) 7.8 - 0.1 (.307- .0 ) 0 004 9.9+ 0.1 (.390+.004 ) 0 0 2.8 (.110) 37