BTA12

BTA12 MAIN FEATURES Symbol IT ( R M S ) VDRM/VRRM IG (Q1) Value 12 600 and 800 5 to 50 Unit A V mA DESCRIPTION Suitable for AC switching operations, can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control in light dimmers, motor speed controllers,... The snubberless and logic level versions are specially recommended for use on inductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards. ABSOLUTE MAXIMUM RATINGS Symbol IT(RMS) Parameter RMS on-state current (full sine wave) Tc = 105°C F = 50 Hz F = 60 Hz tp = 10 ms Tj = 125°C Tj = 125°C Tj = 125°C t = 20 ms t = 16.7 ms Value 12 120 126 78 As A/µs A W °C ² Unit A A ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) I t Value for fusing Critical rate of rise of on-state current ² It dI/dt IGM PG(AV) Tstg Tj ² IG = 2 x IGT , tr £ 100 ns Peak gate current F = 120 Hz tp = 20 µs 50 4 1 - 40 to + 150 - 40 to + 125 Average gate power dissipation Storage junction temperature range Operating junction temperature range Page 1 of 5 http://www.rootech.com.cn BTA12 ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise specified) n SNUBBERLESS and LOGIC LEVEL (3 Quadrants) Symbol Test Conditions Quadrant TW 5 Value SW 10 CW 35 1.3 0.2 10 10 15 MIN. MIN. 20 3.5 1.0 15 25 30 40 6.5 2.9 35 50 60 500 6.5 50 70 80 1000 12 V/µs A/ms BW 50 Unit mA V V mA mA ™ IGT (1) VGT VGD IH (2) IL dV/dt (2) (dI/dt)c (2) VD = 12 V RL = 30 W I - II - III I - II - III I - II - III MAX. MAX. MIN. MAX. VD = VDRM RL = 3.3 kW Tj = 125°C IT = 100 mA IG = 1.2 IGT I - III II MAX. VD = 67 %VDRM gate open Tj = 125°C (dV/dt)c = 0.1 V/µs Tj = 125°C (dV/dt)c = 10 V/µs Tj = 125°C Without snubber Tj = 125°C n STANDARD (4 Quadrants) Quadrant C Value Unit B 50 100 1.3 0.2 25 40 80 MIN. MIN. 200 5 50 50 100 400 10 V/µs V/µs mA V V mA mA Symbol Test Conditions IG (1) VD = 12 V RL = 30 W VGT VGD IH (2) IL dV/dt (2) VD = VDRM RL = 3.3 kW Tj = 125°C IT = 500 mA IG = 1.2 IGT VD = 67 %VDRM gate open Tj = 125°C Tj = 125°C I - II - III IV ALL ALL MAX. MAX. MIN. MAX. 25 50 I - III - IV II MAX. (dV/dt)c (2) (dI/dt)c = 2.7 A/ms STATIC CHARACTERISTICS Symbol VT (2) Vto (2) Rd (2) IDRM IRRM Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1 Test Conditions ITM = 5.5 A tp = 380 µs Tj = 25°C Tj = 125°C Tj = 125°C Tj = 25°C Tj = 125°C MAX. MAX. MAX. MAX. Value 1.55 0.85 35 5 1 Unit V V mW µA mA Threshold voltage Dynamic resistance VDRM = VRRM THERMAL RESISTANCES Symbol Rth(j-c) Rth(j-a) Parameter Value 2.3 60 Unit Junction to case (AC) Junction to ambient °C/W °C/W Page 2 of 5 http://www.rootech.com.cn BTA12 Page 3 of 5 http://www.rootech.com.cn BTA12 Page 4 of 5 http://www.rootech.com.cn BTA12 PACKAGE MECHANICAL DATA DIMENSIONS REF. Millimeters Min. A a1 a2 B b1 b2 C c1 c2 e F I I4 L l2 l3 M Typ. Max. 15.90 4.00 14.00 10.40 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 16.80 2.95 1.70 1.70 2.70 Min. 0.598 0.147 0.511 0.551 0.393 0.409 0.024 0.034 0.048 0.051 0.173 0.181 0.019 0.027 0.094 0.107 0.094 0.106 0.244 0.259 0.147 0.151 0.622 0.646 0.661 0.104 0.116 0.044 0.066 0.044 0.066 0.102 Inches Typ. Max. 0.625 15.20 3.50 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.80 16.40 2.65 1.14 1.14 2.50 2.60 Page 5 of 5 http://www.rootech.com.cn