C8136-04

Series C81/C91 Standard Dual Beam Wire Wrap Edge-Grip Sockets FEATURES: •Dual beam, edge-grip contacts provide high retention with positive wiping action. •Removable cover provides lower profile. •Side-to-side stackable. SPECIFICATIONS: •Body is black UL 94V-0 Glass-filled Thermoplastic Polyester (PBT). •Dual beam contact is Grade A Phosphor Bronze Alloy, 1/2 hard. •Contact plating is either 50-150m [1.27-3.81mm] min. Tin per MIL-P-81728 or 10m [.25mm] min. Gold per MIL-G45204 over 50m [1.27mm] min. Nickel per QQ-N-290. •Contact current rating=1.5 Amp. •Contact resistance=20 mOhms initial. •Insulation resistance=100 MOhms @ 500 VDC per MIL-STD-1344, method 3003.1. •Dielectric withstanding voltage=1000 VAC. •Operating temperature=221°F [105°C] Tin plating, 257°F [125°C] Gold plating. •Solderability: MIL-STD-202, method 208 less heat aging. •Accepts leads up to .011 x .018 ± .003 [.28 x .46 ± .08] or .021 [.53] diameter. •Accepts leads .100-.200 [2.54-5.08] long with cover. MOUNTING CONSIDERATIONS: •Suggested PCB hole size=.046± .002 [1.17 ± .05] dia. Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. ORDERING INFORMATION CXXXX-XX Socket series Pin plating: 91=Gold 81=Tin No. of pins (see table) C81 series: -04=closed entry -54=open entry C91 series: -00=closed entry -50=open entry ALL DIMENSIONS: INCHES [MILLIMETERS] All tolerances ± .005 [.13] unless otherwise specified CONTACT DETAIL No. of Pins 8 14 16 18 20 22 24 28 36 40 Dim. “A” .465 [11.81] .765 [19.43] .865 [21.97] .965 [24.51] 1.065 [27.05] 1.180 [29.97] 1.280 [32.51] 1.480 [37.59] 1.880 [47.75] 2.080 [52.83] Dim. “B” .300 [7.62] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.300 [33.02] 1.700 [43.18] 1.900 [48.26] Centers “C” .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] .400 [10.16] .600 [15.24] .600 [15.24] .600 [15.24] .600 [15.24] Dim. “D” (max) .400 [10.16] .400 [10.16] .400 [10.16] .400 [10.16] .400 [10.16] .500 [12.70] .700 [17.78] .700 [17.78] .700 [17.78] .700 [17.78] Dim. “E” --.300 [7.62] .400 [10.16] .400 [10.16] .400 [10.16] .500 [12.70] .500 [12.70] .500 [12.70] .800 [20.32] .800 [20.32] NORTH AMERICA http://www.arieselec.com • info@arieselec.com Frenchtown, NJ USA TEL: (908) 996-6841 FAX: (908) 996-3891 UK/SCANDINAVIA/IRELAND Milton Keynes, GB TEL: +44 1908 260007 FAX: +44 1908 260008 EUROPE (MAINLAND) Papendrecht, Holland TEL: +31 78 615 94 65 FAX: +31 78 615 43 11 12003 REV.A