CLD240E

CLD240 Series Silicon PIN Photodiodes CLD240 replaces CLD142 and CLD142R CLD240E replaces CLD140 CLD240W replaces CLD141 and CLD141R features • TO-46 header with three lens options • cathode connected to case • large photosensitive area • usable for visible through near-IR UPGRADED SERIES ® Clairex May, 2005  Technologies, Inc. description The CLD240 series are new, direct replacements for the older CLD140 series and feature larger (0.060” x 0.060”) active area silicon PIN photodiode chips. Also featured are faster switching and lower junction capacitance. Three different lensing options are offered which satisfy the majority of application requirements. Contact Clairex for other packaging options. 0.158 (4.01) 0.136 (3.45) 0.210 (5.33) 0.190 (4.83) 1.00 (25.4) min. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) CATHODE 0.190 (4.83) 0.176 (4.47) ANODE 0.025 (0.64) max. 0.050 (1.27) 0.030 (0.76) 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) CLD240 0.213 (5.41) 0.207 (5.26) 0.100 (2.54) pin circle 0.130 (3.30) max 1.00 (25.4) min. 0.050 (1.27) max CATHODE 0.169 (4.29) 0.163 (4.14) ANODE 0.010 (0.25) nom 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) CLD240E 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) CATHODE 0.190 (4.83) 0.176 (4.47) ANODE 0.025 (0.64) max. 0.010 (0.25) max 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) C 5 0.165 (4.19) 0.145 (3.68) 0.156 (3.96) 0.136 (3.45) 1.00 (25.4) min. CLD240W ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/15/06 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com CLD240 Series Silicon PIN Photodiodes absolute maximum ratings (TA = 25°C unless otherwise stated) storage and operating temperature CLD240 and CLD240W .............................................................-65°C to +150°C CLD240E....................................................................................-40°C to +125°C lead soldering temperature(1) ......................................................................... 260°C reverse voltage..................................................................................................60V note: 1. 0.06” (1.5mm) from the header for 5 seconds maximum. ® Clairex  Technologies, Inc. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter CLD240 Series ID CJ VBR tr, tf Dark current Junction capacitance Breakdown voltage Output rise and fall time min 60 - typ 14 15 max 10 10 20 units nA nA pF V ns test conditions VR = 20V, Ee = 0 VF = 100mV, Ee = 0 VBIAS = 0V, f = 1MHz, Ee = 0 IR = 30µA, Ee = 0 RL = 1KΩ CLD240 ISC θHP Short-circuit current(2) Total angle at half sensitivity points Short-circuit current(2) Total angle at half sensitivity points 30 10 10 - 40 14 13 80 13 70 - µA deg. µA deg. µA deg. VBIAS = 0V CLD240E ISC θHP VBIAS = 0V ISC Short-circuit current(2) θHP Total angle at half sensitivity points note: 2. Ee = 1mW/cm2, λ = 850nm. CLD240W VBIAS = 0V Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com