CMM-6-775

Preliminary Datasheet Receiver Module with CME6005 DESCRIPTION CMM6 RC Receiver module C-MAX RF Technology Specialist Together with the ferrite antenna, the receiver module CMM6 forms a complete receiver unit for radio controlled signals of frequencies 40kHz, 60kHz and 77.5kHz. For individual part numbers please refer to technical data below. DIMENSION 20,30 + 0,1 max. 7,0 9,7 + 0,1 1 ,0 1,0 2 ,54 18,80 +0,1 + 3,0+0,1 0,8 1,0 0,1 5 PINNING Pinning X1 X2 X3 X4 X5 Pin connection to CME6005 GND VCC IN2 IN1 PON Remarks Ground of the module Power supply to module Antenna input 1 Antenna input 2 Power on, must be connected to GND externally to switch on module Positive output signal Inverted output signal AGC HLD control pin, must be connected to VCC externally if not connected to MCU. X6 X7 X8 TCO TCON HLD X1 X2 X3 X4 X5 X6 X7 Page SPEC No. Revision State C-MAX printed Version CMM6 A.2 23.11.04 23.11.04 English 1 of 3 X8 Preliminary Data Sheet CMM6 C-MAX TECHNICAL DATA Part Number Receiver Carrier Frequency Operating Voltage Current consumption at 3.0 V Quiescent current in standby mode Operating temperature range Start up time Receiver sensitivity - direct feed in via IN1 & IN2 - via 60mm antenna* connected at IN1 & IN2 * antenna inductance with wire ∅0.23 Output pulse widths tolerance CMM-6-40 40 kHz 1.2 V – 5.5 V < 100 uA 0.5 uA -10 to 60 °C