CMX60D5

Series CMX 3-10 Amp • 0-60, 0-100 Vdc, 0-200Vdc • DC Output SIP • MOSFET Output • Extra Low On-State Resistance DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a PC-mount air-cooled package. Pinouts are compatible with Series 6 and ODC type I/O modules. Manufactured in Crydom’s ISO 9001 Certified facility for optimum product performance and reliability. M O D E L N O . CMX60D5 C U R R E N T D E R A T I N G C U R V E S INPUT SPECIFICATIONS ➀ 7.0 3.0-10.0 Vdc Control Voltage Range 6.0 LOAD CURRENT [AMPS] CMX60D10 3.0-10.0 Vdc 300 Ohm 15 mAdc 3.0 Vdc 1.0 Vdc 0-60 Vdc 0-10 Adc 100 Apk 100 µAdc .018 Ohm 0.18V 1.0 msec 300 µsec CMX100D6 3.0-10.0 Vdc 300 Ohm 15 mAdc 3.0 Vdc 1.0 Vdc 0-100 Vdc 0-6 Adc 100 Apk CMX200D3 4.0-10.0 Vdc 300 Ohm 15 mAdc 4.0 Vdc 1.0 Vdc 0-200 Vdc 0-3 Adc 30 Apk 100 µAdc .20 Ohm 0.6 V 1.0 msec 300 µsec CMX100D6 CMX60D5 5.0 4.0 3.0 2.0 1.0 0 20 12.0 40 60 80 AMBIENT TEMPERATURE [˚C] Nominal Input Impedance Typical Input Current @ 5 Vdc Must Turn On Voltage Must Turn Off Voltage 300 Ohm 15 mAdc 3.0 Vdc 1.0 Vdc CMX200D3 OUTPUT SPECIFICATIONS ➀ ➂ Operating Voltage Range 0-60 Vdc Load Current Range Max. Surge Current, (10 msec) 0-5 Adc 60 Apk 100 µAdc .10 Ohm 0.5V 1.0 msec 300 µsec LOAD CURRENT [AMPS] 10.0 8.0 CMX60D10 6.0 4.0 2.0 0 20 40 60 80 AMBIENT TEMPERATURE [˚C] Max.Off-State Leakage @ Rated Voltage Max. On-State Resistance @ Rated Current (RDS-ON ) Max. On-State Voltage Drop @ Rated Current Max.Turn-On Time @ 10Vdc Control Max. Turn-Off TIme @ 10Vdc Control ➃ 100 µAdc .040 Ohm 0.24V 1.0 msec 300 µsec 2500 Vrms 109 Ohm 15 pF -30 to 80˚C -30 to 125˚C Max. Load Current vs. Temp. .300 (7.6) GENERAL SPECIFICATIONS Dielectric Strength ➁ Insulation Resistance (Min.) @ 500 Vdc 1.00 MAX. (25.4) CONTROL .300 TYP. (7.6) .200 (5.1) 4 3 .700 (17.8) 1.70 (43.1) LOAD 2 1 .050 TYP. (1.3) ➁ Max. Capacitance (Input/Output) Ambient Operating Temperature Range .100 (2.5) Ambient Storage Temperature Range 1.100 (27.9) .040 (1.0) DIA. (4 PLACES) MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: 0.4 oz. (11 g) Thermally Conductive Epoxy © 2001 CRYDOM CORP, Specifications subject to change without notice. PIN PIN PIN PIN 1: 2: 3: 4: +DC LOAD -DC LOAD +DC CONTROL --DC CONTROL GENERAL NOTES ➀ ➁ ➂ ➃ All parameters at 25ºC unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Inductive loads should be diode suppressed. At 55 Vdc. All dimensions are in inches (millimeters) APPROVALS UL E116950 (6A & 10A Models) SERIES CMX Rev. 012202 PAGE 1 OF 1 FastFax Document No. 109 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506