D2W202F

Series D2W 2-3.5 Amps • 120/240 V ac • AC Output SIP • • • • Triac Output Printed Circuit Board M ount Internal Snubber Zero Voltage Sw itc hing The D2W Series features an epoxycoated package that provides exceptional environmental protection. Pinouts are compatible with Series 6 and OAC type I/O modules. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability. C U RR E N T D E R A T IN G C U R V E 3.5 D2W203F-11 D2W203F MODEL NO. IN P U T S PE C I F I C A T ION S ➀ Control Voltage Range Nominal Input Impedance Typical Input Current @ 5 Vdc D2W202F D2W203F D2W203F-11 3-32 Vdc 1500 Ohm 3.0 mAdc 3.0 Vdc 1.0 Vdc 24-280 Vrms .06-2.0 Arms 600 Vpk 28 Apk 3-32 Vdc 1500 Ohm 3.0 mAdc 3.0 Vdc 1.0 Vdc 24-280 Vrms .06-3.0 Arms 600 Vpk 70 Apk 200 V/µsec 8 mArms 1.4 Vpk 1/2 cycle 1/2 cycle 0.5 4000 Vrms 3-32 Vdc 1500 Ohm 3.0 mAdc 3.0 Vdc 1.0 Vdc 24-280 Vrms .06-3.5 Arms 600 Vpk 80 Apk 200 V/µsec 8 mArms 1.4 Vpk 1/2 cycle 1/2 cycle 0.5 LOAD CURRENT (AMPS) 3.0 2.5 2.0 1.5 1.0 0.5 20 40 60 80 AMBIENT TEMPERTURE (¼C) D2W202F Must Turn On Voltage Must Turn Off Voltage OU T P U T S PE C I F I C A T ION S ➀ Operating Voltage Range (47-63 Hz) Load Current Range Transient Over-Voltage Max. Surge Current, (16.6ms) Min. Off-State dv/dt @ Max. Rated Voltage .47 MAX. (11.9) Max. Load Current vs. Temp. ➂ 200 V/µsec 8 mArms 1.4 Vpk 1/2 cycle 1/2 cycle 0.5 Max.Off-State Leakage @ Rated Voltage Max. On-State Voltage Drop @ Rated Current 1.18 MAX. (29.9) CONTROL .39 TYP. (9.9) .200 (5.1) 4 3 .700 (17.8) 1.7 MAX. (43.2) LOAD Max.Turn-On Time Max. Turn-Off TIme Power Factor (Min.) WIth Max. Load 2 1 .050 TYP. (1.3) G E N E R A L S PE C I F I C A T ION S .12 (3.0) Dielectric Strength ➁ ➁ 1.100 (27.9) .040 (1.0) DIA. (4 PLACES) Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance 109 Ohm 10 pF -30 to 80¼C -30 to 125¼C 0.6 oz. (17 g) Thermally Conductive Epoxy PIN PIN PIN PIN 1: 2: 3: 4: AC LOAD AC LOAD +DC CONTROL -DC CONTROL Ambient Operating Temperature Range Ambient Storage Temperature Range All dimensions are in inches (millimeters) M E C HANI C A L S PE C I F I C A T ION S Weight: (typical) Encapsulation: GENERAL NOTES A PP R OVA L S UL E116950 CSA LR81689 FastFax Document No. 116 SERIES D2W Rev. 021202 PAGE 1 OF 1 © 2002 CRYDOM CORP, Specifications subject to change without notice. ➀ ➁ ➂ All parameters at 25˚C unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Off-State dv/dt test method per EIA/NARM standard RS-443. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506