ECS-2200C

ECS-2200 SERIES 8 PIN DIP CLOCK OSCILLATOR The ECS-2200 Series clock oscillator can drive both HCMOS and TTL logic. This oscillator also features tri-state enable/disable capabilities in an 8 pin DIP package. FEATURES • 50pF HCMOS/TTL logic • Tri-State enable/disable • Wide frequency range • Resistance weld package • 3.3V operation (optional) PART NUMBERING GUIDE PART NUMBER * ECS-2200A ECS-2200B ECS-2200C FREQUENCY STABILITY ±100 PPM ±50 PPM ±25 PPM * Complete part number to include frequency. i.e. ECS-2200A-100 (100 = 10.000MHz) OPERATING CONDITIONS/ELECTRICAL CHARACTERISTICS PARAMETERS FREQUENCY RANGE (f o) OPERATING TEMP. RANGE (TOPR) STORAGE TEMP. RANGE (TSTG) FREQUENCY STABILITY INPUT CURRENT (IDD) FREQUENCY RANGE 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 25.000 25.000 ~ 50.000 50.000 ~ 80.000 80.000 ~ 150.000 1.000 ~ 80.000 80.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 80.000 80.000 ~ 150.000 1.000 ~ 150.000 CONDITIONS MINIMUM 1.000 0 -55 -100 TYPICAL MAXIMUM 150.000 +70 +125 +100 25 46 77 82 55 60 5 5 0.5 16 -16 10 50 30 10 UNITS MHz ˚C ˚C PPM mA mA mA mA % % nS nS V V mA mA TTL pF pF mS V DC All conditions* OUTPUT SYMMETRY RISE TIME (T R) FALL TIME (T F) OUTPUT VOLTAGE OUTPUT CURRENT OUTPUT LOAD START-UP TIME (T S) SUPPLY VOLTAGE (V DC) (V OL) (V OH) (I OL) (I OH) 50% V DD level 50% V DD level 10% ~ 90% V DD level 90% ~ 10% V DD level I OL = 1 6 mA I OH = - 16 mA V OL = 0 .5 V V OH = 4 .5 V TTL HCMOS HCMOS 0.0V TO 5.0V +5.0 ±0.25 45 40 17 33 45 67 50 ±3 50 ±3 4.5 * Inclusive of 25˚C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration. ** An internal pullup resistor from pin 1 to pin 14 allows active output if pin 1 is left open. PACKAGE DIMENSIONS (mm) TF TR 2.4VDC 4 min. 5.4 max. 1 LEVEL Open 1 8 +5.0V 4 5 0.01µF CL= 15pf IN916 x 4 TP RL 1.4VDC 0.4VDC (0.5VDC) 40% min 60% max 0 VDC PIN CONNECTIONS #1 H or Open #4 Ground #5 Output #8 GND L GND/CASE CND High Impedance +5VDC 0.8 0.5 4 7.62 13.2 max 13.2 max 0 LEVEL +5.0V 1 Figure 2) TTL Output Wave Form Open 1 8 10% VDD DC 40% min 60% max 0 VDC Figure 3) TTL Test Circuit 8 7.62 5 TF 1 LEVEL TR 90% VDD DC 4 5 0.01µF CL +5.0V TP Figure 1) ECS-2200 Series – Side, Bottom and Top views 50% VDD DC ENABLE / DISABLE FUNCTION** OUTPUT (PIN 8) INH (PIN 1) OPEN*** ACTIVE 1 LEVEL V IH ≥ 2.2 V (V IH ≥ 2.0 V ACTIVE A BOVE 70MHz) ‘0’ LEVEL V IL ≤ 0.8 V HIGH Z ESC-2200 STAND-BY-FUNCTION #1 (Control Term.) Open or “H” “L” #5 (Output Term.) Oscillation “H” Level 0 LEVEL Figure 4) HCMOS Output Wave Form Figure 5) HCMOS Measurement Circuit (CL = 15pF) ECS, INC. INTERNATIONAL 1105 S. RIDGEVIEW, OLATHE, KS 66062 • 913-782-7787 • 800-237-1041 • FAX 913-782-6991 • WWW.ECSXTAL.COM OSCILLATORS 34 OSCILLATORS