EZE480D18

Series EZ 5-18Amp • 120/240, 480 Vac • AC Output • • • • Low Leakage Quick Connect Terminals SCR Output 24V Control Available (EZE Models) nect terminals. The Series EZ is the preferred choice for replacement of 120V and 240V Electro-mechanical relays. Output consists of an SCR switch and is available in Zero-Cross and Random Turn-On (Phase Controlable) versions. Manufactured in Crydom’s ISO 9001 Certified facility for optimum product performance and reliability. The Series EZ SPST-NO AC output relays offer a low profile package with the convenience of quick con- OUTPUT SPECIFICATIONS ➀ Operating Voltage (47-63 Hz) [Vrms] Max. Load Current ➃ [Arms] Min. Load Current, [mArms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] AC CONTROL (120Vac) (24Vac) MODEL NUMBERS DC CONTROL (5Vdc) (24Vdc) EZ240A12 EZE240A12 EZ240D5 24-280 5 150 600 40 1.5 2.0 95 0.1 500 EZ240D12 EZE240D12 24-280 12 150 600 150 1.5 2.0 95 0.1 500 EZ240A18 EZE240A18 EZ240D18 EZE240D18 24-280 18 150 600 200 1.5 1.1 170 0.1 500 EZ480A12 EZE480A12 EZ480D12 EZE480D12 48-660 12 150 1200 150 1.5 2.0 95 0.1 500 EZ480A18 EZE480A18 EZ480D18 EZE480D18 48-660 18 150 1200 200 1.5 1.1 170 0.1 500 Max. On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (R θJC [˚C/W] ) Maximum I 2 t for Fusing, (8.3 msec.) [A 2sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] ➄ Min. Off-State dv/dt @ Max. Rated Voltage [V/ µsec] ➁ Max. Turn-On Time Max. Turn-Off Time Power Factor (Min.) with Max. Load ➅ 0.5 1/2 Cycle (DC Input), 10.0 msec (AC Input) 1/2 Cycle (DC Input), 40.0 msec (AC Input) 0.5 0.5 0.5 0.5 INPUT SPECIFICATIONS ➀ Nominal Voltage MODEL NUMBERS EZ240D05 Control Voltage Range Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedance Typical Input Current @ Nominal Voltage DC CONTROL 5Vdc 5Vdc 5Vdc 24Vdc EZE240D12 EZE240D18 EZE480D12 EZE480D18 15-32 Vdc 15.0 Vdc 1.0 Vdc 1500 Ohms 15 mAdc AC CONTROL 120Vac EZ240A12 EZ240A18 EZ480A12 EZ480A18 90-140 Vrms 90.0 Vrms 10.0 Vrms 10.6k Ohms 10 mArms 24Vac EZE240A12 EZE240A18 EZE480A12 EZE480A18 18-36 Vrms 18.0 Vrms 2.0 Vrms 1.8k Ohms 10 mArms EZ240D12 EZ240D18 3-15 Vdc 3.0 Vdc 1.0 Vdc 300 Ohms 15 mAdc EZ480D12 EZ480D18 4-15 Vdc 4.0 Vdc 1.0 Vdc 240 Ohms 15 mAdc 4-15 Vdc 4.0 Vdc 1.0 Vdc 300 Ohms 13 mAdc ©2002 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25˚ C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 240V, DC control models only, all others 2500Vrms. Heat sinking required, for derating curves see page 2. For recommended applications and more information contact: Off-State leakage for snubbered USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 version (suffix S) is 10.0 mArms. Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 ➅ Turn-on time for random turn-on versions Email: sales@crydom.com WEB SITE: http://www.crydom.com is 0.1 msec (DC Control Models). UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham FastFax Document No.160 Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. SERIES EZ. GERMANY: +49 (0)180 3000 506 REV. 031802 PAGE 1 OF 2 ➀ ➁ ➂ ➃ ➄ GENERAL NOTES Series EZ 5-18Amp • 120/240, 480 Vac • AC Output GENERAL SPECIFICATIONS Dielectric Strength ➂ 50/60Hz Input/Output/Base Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: Terminals: A VAILABLE OPTIONS S R Internal Snubber Example: EZ240D12S Random Turn-On Switching (240V Only) Example: EZ240D12R, EZ240D12RS EZ240D5R 1 1.00 (25.4) 2.63 (66.8) 2.24 (56.9) .197 DIA. (2 PLCS) 4000 Vrms* 109 Ohm 8 pF -40 to 80˚C -40 to 125˚C 1.5 oz. (43g) Thermally Conductive Epoxy .25 Inch Faston *240V, DC Control Models Only. OUTPUT 2 .49 (12.4) 1.50 (38.1) SOLID-STATE RELAY 3+ FASTON TERMINAL .250 X .032 4 PLCS. INPUT 4 PIN PIN PIN PIN 1: 2: 3: 4: AC LOAD AC LOAD +DC CONTROL -- DC CONTROL - 1.73 (43.9) .40 (10.2) Crydom Heat Sinks offer excellent thermal management and are perfectly matched to the load current ratings of Crydom panel mount relays. Request Crydom’s Heat Sink specification sheet for all the details. .12 (3.0) .95 (24.1) All dimensions are in inches (millimeters) CURRENT DERATING CURVES 5A 6 Base Plate Temp [˚C] 5˚C/W NO HEATSINK 12A 15 10˚C/W 18A 18 2˚C/W Base Plate Temp [˚C] Power Dissipation [W] 4 3 2 120 1 115 10 Power Dissipation [W] 4˚C/W 6˚C/W 116 12 5˚C/W 116 5 NO HEATSINK 120 6 NO HEATSINK 120 124 0 1 2 3 4 5 10 20 40 60 80 124 0 3 6 9 12 15 18 20 40 60 80 Load Current [Arms] Max Ambient Temp. [˚C] 2 4 6 8 10 12 20 40 60 80 Load Current [Arms] Max Ambient Temp. [˚C] Load Current [Arms] Max Ambient Temp. [˚C] APPROVALS UL E116950 CSA LR81689 VDE 10139 UG (240V DC Control Only) © 2002 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No.160 SERIES EZ REV. 031802 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Base Plate Temp [˚C] 5 Power Dissipation 112 110 2˚C/W 112