FDC40-12D3305

• 40 WATTS OUTPUT POWER • 2:1 WIDE INPUT VOLTAGE RANGE • DESIGN MEET SAFETY STANDARD • SIX-SIDED CONTINUOUS SHIELD • HIGH EFFICIENCY UP TO 90% • STANDARD 3” X 2.6” X 0.4” PACKAGE • FIXED SWITCHING FREQUENCY The FDC40 series offer 40 Watts of output power from a 3 x 2.6 x 0.4 inch package. The FDC40 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The FDC40 features 1600VDC of isolation, short-circuit and over-voltage protection, as well as six sided shielding. Designed meets the safety of EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. Patent No. 460344 T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Single & Dual Voltage accuracy Full load and nominal Vin Triple 3.3V/5V Auxiliary Voltage adjustability FDC40-XXD3305 3.3V output Minimum load (Note 1) Others Single Dual Line regulation LL to HL at Full Load Triple 3.3V/5V Auxiliary Single Dual Load regulation 10% to 100% FL Triple 3.3V/5V Auxiliary Dual Cross regulation (Note 2) Triple 3.3V/5V Auxiliary Ripple and noise Temperature coefficient Transient response recovery time 25% load step change 3.3V output Over voltage protection 5V output Zener diode clamp 12V output 15V output Short circuit protection 20MHz bandwidth All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS 40 Watts max ± 2% ± 2% ± 5% ± 10% 20% min 10% of FL ± 0.5% ± 1% ± 2% ± 5% ± 0.5% ± 1% ± 2% ± 5% ± 1% ± 1% ± 5% Efficiency Isolation voltage Isolation resistance Isolation capacitance Switching frequency Design meet safety standard Case material Base material Potting material Dimensions Weight MTBF (Note 5) 9 See table 1600VDC, min 10 ohms, min 500Pf, max 185KHz, typ UL1950, EN60950 Nickel-coated copper Non-conductive black FR4 Epoxy (UL94-V0) 3.00 X 2.60 X 0.40 Inch (70.2 X 66.0 X 10.2 mm) 125g (4.4oz) 1.590 x 106 hrs 1%/p-p of Vout max I0.02% / ºC, max 500uS 3.9V 6.2V 15V 18V Hiccup, automatics recovery ENVIRONMENTAL SPECIFICATIONS Operating temperature range Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Nature convection -40ºC ~ +85ºC (with derating) +100ºC -55ºC ~ +105ºC 5.7ºC/watt MIL-STD-810D 10~55Hz, 2G, 30minitues along X,Y and Z 5% to 95% RH INPUT SPECIFICATIONS Input voltage range Input filter 12V input Input surge voltage 24V input 100mS max 48V input Input reflected ripple (Note 3) Nominal Vin and full load Start up time Nominal Vin and constant resistor load DC-DC ON DC-DC OFF Nominal input Remote ON/OFF (Note 4) Remote off input current 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Pi type 36VDC 50VDC 100VDC 40mAp-p 25mS typ Relative humidity EMC CHARACTERISTICS Conducted emissions Radiated emissions Conducted immunity Radiated immunity Surge Fast transient ESD EN55022 EN55022 EN61000-4-6 EN61000-4-3 EN61000-4-5 EN61000-4-4 EN61000-4-2 Level A Level A Perf. Criteria2 Perf. Criteria2 Perf. Criteria2 Perf. Criteria2 Perf. Criteria2 Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V 30mA Model Number FDC40-12S33 FDC40-12S05 FDC40-12S12 FDC40-12S15 FDC40-12D05 FDC40-12D12 FDC40-12D15 FDC40-12D3305 FDC40-12T0512 FDC40-12T0515 FDC40-24S33 FDC40-24S05 FDC40-24S12 FDC40-24S15 FDC40-24D05 FDC40-24D12 FDC40-24D15 FDC40-24D3305 FDC40-24T0512 FDC40-24T0515 FDC40-48S33 FDC40-48S05 FDC40-48S12 FDC40-48S15 FDC40-48D05 FDC40-48D12 FDC40-48D15 FDC40-48D3305 FDC40-48T0512 FDC40-48T0515 Input Range 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 / 5VDC 5 / ± 12 VDC 5 / ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 / 5VDC 5 / ± 12 VDC 5 / ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 / 5VDC 5 / ± 12 VDC 5 / ± 15 VDC Output Current 10000mA 8000mA 3400mA 2700mA +7000 / -1000mA ± 1800mA ± 1400mA 4000 / 4000mA 4000 / ± 850mA 4000 / ± 680mA 10000mA 8000mA 3400mA 2700mA +7000 / -1000mA ± 1800mA ± 1400mA 4000 / 4000mA 4000 / ± 850mA 4000 / ± 680mA 10000mA 8000mA 3400mA 2700mA +7000 / -1000mA ± 1800mA ± 1400mA 4000 / 4000mA 4000 / ± 850mA 4000 / ± 680mA Input (6) Current 3530mA 4170mA 4100mA 4100mA 4330mA 4550mA 4430mA 3730mA 4490mA 4430mA 1720mA 2010mA 1980mA 2000mA 2130mA 2170mA 2140mA 1840mA 2180mA 2160mA 850mA 980mA 1000mA 1000mA 1060mA 1100mA 1100mA 910mA 1060mA 1060mA Eff (%) 83 84 87 87 81 83 83 78 79 80 84 87 90 88 82 87 86 79 81 82 85 89 89 88 84 86 86 80 83 83 (7) Capacitor Load max (8) 25800uF 13600uF 2400uF 1550uF 12000 / 1700uF ± 1200uF ± 750uF 10300 / 6800uF 6800 / ± 590uF 6800 / ± 380uF 25800uF 13600uF 2400uF 1550uF 12000 / 1700uF ± 1200uF ± 750uF 10300 / 6800uF 6800 / ± 590uF 6800 / ± 380uF 25800uF 13600uF 2400uF 1550uF 12000 / 1700uF ± 1200uF ± 750uF 10300 / 6800uF 6800 / ± 590uF 6800 / ± 380uF Note 1. 2. The FDC40 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Cross regulation: Dual output—Asymmetrical load 25% to 100% full load Triple output – 3.3V / 5V 100% load and one of auxiliary 100% load, other auxiliary load change from 25% to 100% load Simulated source impedance of 12uH. 12uH inductor in series with +Vin. The ON-OFF control pin voltage is reference to negative input. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load Test by minimum Vin and constant resistor load. FDC40-48S05 Efficiency VS Input Voltage EFFICIENCY (%) 90 89 88 87 86 85 84 83 82 81 80 36 40 45 50 55 60 65 70 75 3. 4. 5. 6. 7. 8. INPUT VOLTAGE (V) FDC40-48S05 Derating Curve OUTPUT POWER (%) EFFICIENCY (%) FDC40-48S05 Efficiency VS Output load 90 89 88 86 84 82 80 70 60 50 45 0.5 100 75 50 25 0 -40 -25 -10 Nature convection 0 50 60 70 80 90 100 1 2 3 4 5 6 7 8 AMBIENT TEMPERATURE (ºC) OUTPUT LOAD (A) 0.30 (7.6) 2.60 (66.0) 0.40 0.60 (15.2) (10.2) 0.40 (10.2) 0.70 (17.8) 0.40 (10.2) EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim [ ] for triple output trim { } XXD3305 only trim 3.3V/5V TRIM UP TRIM DOWN DIA. 0.04 (1.0) 1 2 3 4 7 (7) [9] {6} 6 (8) [10] {8} RU 6 (8) [10] {8} 5 (5) [8] {5} RD 3.00 (76.2) 2.50 (63.5) Bottom View PIN CONNECTION PIN SINGLE CTRL + INPUT - INPUT SYNC TRIM DOWN TRIM TRIM UP + OUTPUT - OUTPUT NO PIN DUAL CTRL + INPUT - INPUT SYNC + OUTPUT COMMON - OUTPUT TRIM NC NC TRIPLE CTRL + INPUT - INPUT SYNC + AUX COMMON (AUX) - AUX + OUTPUT(PRIMARY) COMMON(PRIMARY) 3.3V / 5V CTRL + INPUT - INPUT SYNC +3.3V COMMON + 5V TRIM NC NC 5 6 7 0.50 (12.7) 8 9 10 0.32 (8.0) 0.30 (7.6) 0.30 (7.6) 0.40 0.40 0.40 (10.2) (10.2) (10.2) 1. All dimensions in Inches (mm) 2. Pin pitch tolerance I0.014(0.35) 1 2 3 4 5 6 7 8 9 10 TRIM Converter 1 + Vin 2 4 3 + Sync Application of synchronization 1. The unit is capable of external synchronization from an independent time base with a switching rate between 200kHz and 215kHz 2. The amplitude of the synchronizing pulse train is TTL compatible 3. The duty cycle of the CLK should be 20% high and 80% low 4. Synchronization is referenced to negative input (-Vin) - Vin Converter 2 2 4 3 + Sync ON/OFF Control application + Vin Converter 2 1 CLK CLK Signal 80% 2N7000 + CTRL - Vin ON/OFF Control 3 - 20%