FLM5964-25F

FLM5964-25F FEATURES • • • • • • • High Output Power: P1dB = 44.5dBm (Typ.) High Gain: G1dB = 10.0dB (Typ.) High PAE: ηadd = 37% (Typ.) Low IM3 = -46dBc@Po = 33.5dBm Broad Band: 5.9 ~ 6.4GHz Impedance Matched Zin/Zout = 50Ω Hermetically Sealed Package C-Band Internally Matched FET DESCRIPTION The FLM5964-25F is a power GaAs FET that is internally matched for standard communication bands to provide optimum power and gain in a 50 ohm system. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING (Ambient Temperature Ta=25°C) Item Drain-Source Voltage Gate-Source Voltage Total Power Dissipation Storage Temperature Channel Temperature Symbol VDS VGS PT Tstg Tch Tc = 25°C Condition Rating 15 -5 93.7 -65 to +175 175 Unit V V W °C °C Eudyna recommends the following conditions for the reliable operation of GaAs FETs: 1. The drain-source operating voltage (VDS) should not exceed 10 volts. 2. The forward and reverse gate currents should not exceed 64.0 and -11.2 mA respectively with gate resistance of 25Ω. ELECTRICAL CHARACTERISTICS (Ambient Temperature Ta=25°C) Item Saturated Drain Current Transconductance Pinch-off Voltage Gate Source Breakdown Voltage Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Drain Current Power-added Efficiency Gain Flatness 3rd Order Intermodulation Distortion Thermal Resistance Channel Temperature Rise Symbol IDSS gm Vp VGSO P1dB G1dB Idsr ηadd ∆G IM3 Rth ∆Tch f = 6.4 GHz, ∆f = 10 MHz 2-Tone Test Pout = 33.5dBm S.C.L. Channel to Case 10V x Idsr x Rth VDS =10V, IDS = 0.65IDSS (Typ.), f = 5.9 ~ 6.4 GHz, ZS=ZL= 50 ohm Test Conditions VDS = 5V, VGS = 0V VDS = 5V, IDS = 6.5A VDS = 5V, IDS = 500mA IGS = -500µA Min. -0.5 -5.0 43.5 9.0 -44 Limit Typ. Max. 10 10 -1.5 44.5 10.0 37 -46 1.4 15 -3.0 ±0.6 1.6 100 Unit A S V V dBm dB mA % dB dBc °C/W °C 6500 7600 CASE STYLE: IK G.C.P.: Gain Compression Point, S.C.L.: Single Carrier Level Edition 1.3 August 2004 1 FLM5964-25F C-Band Internally Matched FET POWER DERATING CURVE 100 36 OUTPUT POWER & IM3 vs. INPUT POWER VDS=10V f1 = 6.4 GHz f2 = 6.41 GHz 2-tone test Total Power Dissipation (W) Output Power (S.C.L.) (dBm) 80 34 32 30 28 26 24 22 20 Pout 60 -35 -40 -45 -50 -55 -60 40 20 0 50 100 150 200 Case Temperature (°C) 14 16 18 20 22 24 Input Power (S.C.L.) (dBm) S.C.L.: Single Carrier Level OUTPUT POWER vs. FREQUENCY 46 OUTPUT POWER vs. INPUT POWER Output Power (dBm) VDS=10V P1dB 45 Pin=34.0dBm 44 42 40 38 36 VDS=10V f = 6.15 GHz Pout Output Power (dBm) 44 43 42 41 40 39 38 37 5.9 6.0 6.1 6.2 6.3 6.4 26.0dBm 28.0dBm 32.0dBm 40 30 20 10 IM3 (dBc) ηadd (%) IM3 30.0dBm ηadd 24 26 28 30 32 34 36 Input Power (dBm) Frequency (GHz) 2 FLM5964-25F C-Band Internally Matched FET S11 S22 +j100 6.6 6.5 6.4 5.7GHz 5.8 5.8 5.9 6.0 5.9 6.0 6.1 6.2 6.3 250 +j50 +j25 +90° S21 S12 +j10 +j250 6.3 6.1 6.0 5.8 6.4 6.3 6.2 6.5 6.6 5.7GHz 0 25 6.6 6.5 6.6 50Ω 6.1 180° 6.2 5.9 5.8 5.8 1 2 3 4 6.1 5.7GHz 6.0 5.9 5.8 -j10 6.4 6.4 -j250 0.1 -j25 -j50 -j100 0.2 5.7GHz -90° FREQUENCY (MHZ) 5700 5800 5900 6000 6100 6200 6300 6400 6500 6600 S11 MAG .428 .369 .311 .261 .230 .240 .290 .365 .451 .538 ANG 104.1 81.2 55.2 24.5 -13.9 -55.4 -92.9 -123.7 -148.8 -170.8 S-PARAMETERS VDS = 10V, IDS = 6500mA S21 S12 MAG ANG MAG ANG 4.249 4.311 4.347 4.354 4.333 4.272 4.170 3.999 3.756 3.470 -89.0 -107.4 -126.1 -144.9 -164.2 176.2 156.2 135.8 115.2 94.6 .085 .090 .096 .099 .103 .105 .106 .103 .099 .092 -144.0 -162.3 179.4 161.1 142.1 123.1 103.7 84.0 63.8 43.7 SCALE FOR |S12| 6.2 6.5 6.3 SCALE FOR |S21| 0° S22 MAG .335 .356 .371 .378 .374 .358 .333 .306 .300 .327 ANG 79.6 59.2 38.7 18.6 -3.1 -26.4 -53.6 -85.1 -122.1 -159.3 3 FLM5964-25F C-Band Internally Matched FET Case Style "IK" Metal-Ceramic Hermetic Package 2.0 Min. (0.079) 1 0.1 (0.004) 2 0.6 (0.024) 14.9 (0.587) 2.0 Min. (0.079) 4-R 1.3±0.15 (0.051) 3 2.4±0.15 (0.094) 5.5 Max. (0.217) 1.4 (0.055) 17.4±0.3 (0.685) 8.0±0.2 (0.315) 1. Gate 2. Source (Flange) 3. Drain Unit: mm(inches) 20.4±0.3 (0.803) 24±0.5 (0.945) For further information please contact: CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com • Do not put this product into the mouth. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte Ltd. Hong Kong Branch Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170 4