0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
FS6282

FS6282

  • 厂商:

    ETC1

  • 封装:

  • 描述:

    FS6282 - DUAL PLL CLOCK GENERATOR IC - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
FS6282 数据手册
FS6282 AMERICAN MICROSYSTEMS, INC. Dual PLL Clock Generator IC October 1999 1.0 • • • • Features 2.0 Description Dual phase-locked loop (PLL) device with three output clock frequencies 3.3V supply voltage Small circuit board footprint (8-pin 0.150″ SOIC) Custom frequency selections available - contact your local AMI Sales Representative for more information Figure 1: Pin Configuration CLKA VSS XIN XOUT 1 8 The FS6282 is a monolithic CMOS clock generator IC designed to minimize cost and component count in digital video/audio systems. Two high-resolution phase-locked loops generate two output clocks (CLKA and CLKB) through an array of postdividers. All frequencies are ratiometrically derived from the crystal oscillator frequency. The locking of all the output frequencies together can eliminate unpredictable artifacts in video systems and reduce electromagnetic interference (EMI) due to frequency harmonic stacking. OE VDD CLKC CLKB Table 1: Crystal / Output Frequencies DEVICE FS6282-03 fXIN (MHz) CLKA (MHz) CLKB (MHz) CLKC (MHz) 20.000 20.000 48.000 8.000 FS6282 2 3 4 7 6 5 NOTE: Contact AMI for custom PLL frequencies 8-pin (0.150″ ) SOIC Figure 2: Block Diagram XIN CRYSTAL OSC. XOUT PLL DIVIDER ARRAY CLKA CLKB PLL OE CLKC FS6282 This document contains information on a preproduction product. Specifications and information herein are subject to change without notice. ISO9001 10.1.99 FS6282 Dual PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. October 1999 Table 2: Pin Descriptions Key: AI = Analog Input; AO = Analog Output; DI = Digital Input; DIU = Input with Internal Pull-Up; DID = Input with Internal Pull-Down; DIO = Digital Input/Output; DI-3 = Three-Level Digital Input, DO = Digital Output; P = Power/Ground; # = Active Low pin PIN 1 2 3 4 5 6 7 8 TYPE DO P AI AO DO DO P DIU NAME CLKA VSS XIN XOUT CLKB CLKC VDD OE Clock Output A Ground Crystal Oscillator Feedback Crystal Oscillator Drive Clock Output B Clock Output C Power (+3.3 volts) DESCRIPTION Output Enable (outputs active when OE=VDD) 3.0 Electrical Specifications Table 3: Absolute Maximum Ratings Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These conditions represent a stress rating only, and functional operation of the device at these or any other conditions above the operational limits noted in this specification is not implied. Exposure to maximum rating conditions for extended conditions may affect device performance, functionality, and reliability. PARAMETER Supply Voltage (VSS = ground) Input Voltage, dc Output Voltage, dc Input Clamp Current, dc (VI < 0 or VI > VDD) Output Clamp Current, dc (VI < 0 or VI > VDD) Storage Temperature Range (non-condensing) Ambient Temperature Range, Under Bias Junction Temperature Lead Temperature (soldering, 10s) Input Static Discharge Voltage Protection (MIL-STD 883E, Method 3015.7) SYMBOL VDD VI VO IIK IOK TS TA TJ MIN. VSS-0.5 VSS-0.5 VSS-0.5 -50 -50 -65 -55 MAX. 7 VDD+0.5 VDD+0.5 50 50 150 125 125 260 2 UNITS V V V mA mA °C °C °C °C kV CAUTION: ELECTROSTATIC SENSITIVE DEVICE Permanent damage resulting in a loss of functionality or performance may occur if this device is subjected to a high-energy electrostatic discharge. Table 4: Operating Conditions PARAMETER Supply Voltage Ambient Operating Temperature Range SYMBOL VDD TA CONDITIONS/DESCRIPTION 3.3V ± 10% MIN. 3.0 0 TYP. 3.3 MAX. 3.6 70 UNITS V °C 2 ISO9001 10.1.99 FS6282 AMERICAN MICROSYSTEMS, INC. Dual PLL Clock Generator IC October 1999 Table 5: DC Electrical Specifications Unless otherwise stated, VDD = 3.3V ± 10%, no load on any output, and ambient temperature range TA = 0°C to 70°C. Parameters denoted with an asterisk ( * ) represent nominal characterization data and are not production tested to any specific limits. Where given, MIN and MAX characterization data are ± 3σ f rom typical. Negative currents indicate current flows out of the device. PARAMETER Overall Supply Current, Dynamic, with Loaded Outputs Crystal Oscillator Crystal Loading Capacitance Clock Outputs (CLKA, CLKB) Output Impedance * Short Circuit Source Current * Short Circuit Sink Current * SYMBOL CONDITIONS/DESCRIPTION MIN. TYP. MAX. UNITS IDD fXTAL = 13.5MHz; CL = 10pF, VDD = 3.6V 30 mA CL(xtal) As seen by a crystal connected to XIN and XOUT 18 pF zOH zOL IOSH IOSL VO = 0.1VDD; output driving high VO = 0.1VDD; output driving low VO = 0V; shorted for 30s, max. VO = 3.3V; shorted for 30s, max. 45 45 -35 35 Ω mA mA Table 6: AC Timing Specifications Unless otherwise stated, VDD = 3.3V ± 10%, no load on any output, and ambient temperature range TA = 0°C to 70°C. Parameters denoted with an asterisk ( * ) represent nominal characterization data and are not production tested to any specific limits. Where given, MIN and MAX characterization data are ± 3σ f rom typical. PARAMETER Overall Synthesis Error Clock Outputs (CLKA, CLKB, CLKC) Duty Cycle * Jitter, Period (peak-peak) * Rise Time * Fall Time * SYMBOL CONDITIONS/DESCRIPTION MIN. TYP. MAX. UNITS (unless otherwise noted in Frequency Table) 0 ppm Ratio of high pulse width (as measured from rising edge to next falling edge at VDD/2) to one clock period 45 300 3 2.5 55 % ps ns ns tj(∆P) tr tf From rising edge to next rising edge at VDD/2, CL = 10pF VDD = 3.3V; VO = 0.3V to 3.0V; CL = 10pF VDD = 3.3V; VO = 3.0V to 0.3V; CL = 10pF 3 ISO9001 10.1.99 FS6282 Dual PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. October 1999 4.0 Package Information Table 7: 8-pin SOIC (0.150") Package Dimensions DIMENSIONS INCHES MIN. A A1 A2 B C D E e H h L Θ 0.061 0.004 0.055 0.013 0.0075 0.189 0.150 0.230 0.010 0.016 0° MAX. 0.068 0.0098 0.061 0.019 0.0098 0.196 0.157 0.244 0.016 0.035 8° MILLIMETERS MIN. 1.55 0.102 1.40 0.33 0.191 4.80 3.81 5.84 0.25 0.41 0° MAX. 1.73 0.249 1.55 0.49 0.249 4.98 3.99 6.20 0.41 0.89 8° BASE PLANE 1 ALL RADII: 0.005" TO 0.01" R 8 E H AMERICAN MICROSYSTEMS, INC. h x 45° B e A2 A D A1 SEATING PLANE 7° typ. 0.050 BSC 1.27 BSC C L θ Table 8: 8-pin SOIC (0.150") Package Characteristics PARAMETER Thermal Impedance, Junction to Free-Air 8-pin 0.150” SOIC Lead Inductance, Self Lead Inductance, Mutual Lead Capacitance, Bulk SYMBOL ΘJA L11 L12 C11 CONDITIONS/DESCRIPTION Air flow = 0 m/s Corner lead Center lead Any lead to any adjacent lead Any lead to VSS TYP. 110 2.0 1.6 0.4 0.27 UNITS °C/W nH nH pF 4 ISO9001 10.1.99 FS6282 AMERICAN MICROSYSTEMS, INC. Dual PLL Clock Generator IC October 1999 5.0 Ordering Information DEVICE NUMBER PACKAGE TYPE 8-pin (0.150”) SOIC (Small Outline Package) 8-pin (0.150”) SOIC (Small Outline Package) OPERATING TEMPERATURE RANGE 0° C to 70° C (Commercial) 0° C to 70° C (Commercial) SHIPPING CONFIGURATION Tape and Reel Tubes ORDERING CODE 11640-828 11640-838 FS6282-03 FS6282-03 Copyright © 1999 American Microsystems, Inc. Devices sold by AMI are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. AMI makes no warranty, express, statutory implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. AMI makes no warranty of merchantability or fitness for any purposes. AMI reserves the right to discontinue production and change specifications and prices at any time and without notice. AMI’s products are intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment, are specifically not recommended without additional processing by AMI for such applications. American Microsystems, Inc., 2300 Buckskin Rd., Pocatello, ID 83201, (208) 233-4690, FAX (208) 234-6796, WWW Address: http://www.amis.com E-mail: tgp@amis.com 5 ISO9001 10.1.99
FS6282
1. 物料型号: - 型号为FS6282,具体型号FS6282-03。

2. 器件简介: - FS6282是一款单片CMOS时钟发生器IC,旨在最小化数字音视频系统中的成本和元件数量。它包含两个高分辨率的锁相环,通过一系列后分频器生成两个输出时钟(CLKA和CLKB),所有频率都与晶体振荡器频率成比例。

3. 引脚分配: - 引脚1:CLKA,时钟输出A。 - 引脚2:VSS,地。 - 引脚3:XIN,晶体振荡器反馈。 - 引脚4:XOUT,晶体振荡器驱动。 - 引脚5:CLKB,时钟输出B。 - 引脚6:CLKC,时钟输出C。 - 引脚7:VDD,电源(+3.3伏)。 - 引脚8:OE,输出使能(OE=VDD时输出激活)。

4. 参数特性: - 工作电压:3.3V±10%。 - 环境工作温度范围:0°C至70°C。 - 晶体振荡器负载电容:18pF。 - 电源电流(动态,带负载输出):30mA(典型值)。

5. 功能详解: - 该器件通过锁定所有输出频率来消除视频系统中不可预测的伪影,并减少由于频率谐波堆叠引起的电磁干扰(EMI)。

6. 应用信息: - 适用于需要精确时钟频率的数字视频/音频系统。

7. 封装信息: - 8引脚SOIC(0.150")封装。 - 封装尺寸和特性包括热阻、引脚电感和电容等参数。
FS6282 价格&库存

很抱歉,暂时无法提供与“FS6282”相匹配的价格&库存,您可以联系我们找货

免费人工找货