GL5EG43

LED ■ LED LAMPS Resin type LED LAMP (I F = 20 mA*1, Ta = 25°C) KG Green EG Yellow-green FG Yellow-green (HL) HY Yellow HS Sunset orange HD Red PR Red Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. (555 nm) GL3KG8 (565 nm) (565 nm) (585 nm) GL3HY8 (610 nm) (635 nm) (695 nm) ● ● ● 30 GL3EG8 GL3EG41 60 130 130 38 65 18 18 25 100 20 150 160 160 55 GL3HS8 60 GL3HD8 40 GL3PR8 GL3KG44 GL3KG43 GL3KG62 GL3KG63 60 GL3EG44 20 GL3EG43 22 GL3EG62 6 GL3EG63 LT3E31W*2 GL3HY44 GL3HY43 GL3HY62 GL3HY63 100 GL3HS44 25 GL3HS43 40 GL3HS62 16 GL3HS63 15 25 LT3S65W*2 110 GL4HS8 100 GL3HD44 25 GL3HD43 40 GL3HD62 15 GL3HD63 110 GL3PR44 25 GL3PR43 50 17 GL3PR63 15 LT3P31W*2 ø3 ● ● ● ● LT3H31W*2 LT3H65W*2 GL4HY8 LT3D31W*2 25 LT3D65W*2 80 GL4HD8 GL5HD4 ● LT3E65W*2 GL4KG8 30 GL4EG8 GL5EG4 GL5KG8 60 GL5EG8 70 GL5EG41 70 GL5EG44 25 LT3P65W*2 110 GL4PR8 25 GL5PR4 80 GL5PR8 150 GL5PR41 100 GL5PR44 ø4 Cylinder ● ● ● ● ● GL5HY8 GL5HY41 GL5HY44 120 GL5HS8 100 GL5HS41 100 GL5HS44 80 GL5HD8 100 GL5HD41 100 GL5HD44 GL5KG41 GL5KG44 ● ø5 ● GL5EG261B0SB 150 GL5EG40 250 300 GL5FG43 23 120 15 GL5HS47 6 GL5HY40 600 GL5HY43 250 GL5HS40 250 GL5HS43 GL5HD261B0SB 80 GL5PR261B0SB 15 200 GL5HD40 250 GL5HD43 GL5HD60 250 GL5PR40 300 8 35 ● ● ● GL5KG43 120 GL5EG43 GL5EG60 GL6EG11T*3 GL5EG47 ● ● GL6EG26T*3 140 GL2EG6 GL8EG2 15 30 50 5 28 12 12 6 8 8 6 GL8HY42 GL8HY5 GL8HY25 GL8HY29 GL8HY23 GL8HY21 GL8HY26 GL8HY22 6 25 12 GL8HS25 10 GL8HS29 8 8 8 5 GL8HS22 5 GL8HS21 8 GL2HY6 12 GL2HD6 GL8HD2 GL8HD4 GL8HD42 GL8HD5 10 GL8HD25 7 GL8HD23 GL8HD21 GL8HD26 GL8HD22 6 8 8 8 GL8PR21 GL8PR26 GL8PR22 GL8PR28 0.7 0.7 1.2 0.9 12 GL2PR6 30 40 5 22 12 GL8PR25 GL8PR29 1.5 3 GL8PR42 0.7 1.5 Convex Arch ø2 2.5 × 5.0 ● 2.0 × 3.1 1.8 × 3.9 ● 1.9 × 3.9 ● ● ● GL8EG4 GL8KG42 1.5 GL8EG42 GL8EG5 GL8KG25 GL8KG29 9 5 GL8EG25 GL8EG29 GL8EG23 GL8KG21 GL8KG26 GL8KG22 4 4 GL8EG21 GL8EG26 Rectangle 2.0 × 3.2 2.0 × 3.2 ● 2.0 × 4.5 ● 2.0 × 5.0 ● ● Square 5.0 × 5.0 ● Triangle Isosceles ● triangle 3.5 GL8EG22 *1 PR series (Red): I F = 5 mA (GL8PR25, GL8PR29: IF = 10 mA) *2 Taped model *3 With tie-bar HL: High-luminosity Taped model is also available. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 97 LED ø5 (Inverted cone) Long: 5.8 Oval Short: 4.6 ● GL5HD47 8 Luminous intensity (mcd) TYP. 8 12 3 2 1.5 3 15 3 15 15 15 Radiation shape (mm) Colored diffusion Colored transparency Colorless transparency Milky diffusion Appearance LED LAMP Cylinder LED GL3PR8 series GL3PR44 series GL3HY43 series GL3KG62 series LT3E31W series GL3PR63 series LT3E65W series GL4PR8 series GL5PR4 series GL5HS8 series GL5KG41 series GL5PR44 series GL5EG40 series GL5HY43 series GL5EG60 series GL6EG11T GL5HD47 series Oval Convex Arch GL6EG26T GL2HY6 GL8EG2 series GL8HD4 series Rectangle GL8KG42 series GL8KG25 series GL8HY29 series GL8HD23 series GL8HS21 series GL8HY26 series Square Triangle GL8HD22 series GL8PR28 98 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED ■ DICHROMATIC LED LAMPS Resin type Appearance DICHROMATIC LED LAMP (The values in luminous intensity are radiation color order) (I F = 20 mA*1, Ta = 25°C) E JJ Yellow- + Orange green (HL) CU Luminous intensity (mcd) TYP. ❇ EP Yellow- + Red green ED Yellow- + Red green EH Yellow- + Yellow green HP Yellow + Red Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. ø3 Cylinder ● ● ● GL5EJJ502C0X* 2 110/170 GL5CU44 GL5EP5 ø5 100/240 120/250 ● ● GL3ED8 40/9 GL5ED5 GL5ED44 GL5ED60 GL8ED5 GL9ED2 GL9ED4 20/15 40/25 80/50 11/8 10/6.5 8/3 GL9EH2 7/4 GL5HP5 GL6CU7 ● ● ● 1.9 × 3.9 2.0 × 5.0 5.0 × 5.0 Rectangle 6/2 GL8HP5 GL9HP2 3/1.5 1/0.8 ❇ CU series: Common anode pin connection *1 P (Red) and H (yellow): I F = 10 mA *2 Taped model HL: High-luminosity GL3ED8 GL5EJJ502C0X GL5ED5 series GL5ED44 series GL5ED60 series GL6CU7 GL8HP5 series GL9ED2 series GL9ED4 Luminous intensity (mcd) TYP. 15/9 Colored diffusion Colored transparency Colorless transparency Milky diffusion Radiation shape (mm) Yellow- + Red green (HL) Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 99 LED HIGH-LUMINOSITY CHIP LED ■ HIGH-LUMINOSITY (AlGaInP) CHIP LEDs (Taped models only) Resin type Outline dimensions (mm) LED ✩New product ★Under development (I F = 20 mA, Ta = 25°C) Colorless transparency Colored transparency ZG Green ZE JE Luminous Yellow-green Luminous intensity intensity (mcd) (mcd) TYP. TYP. GM1JE35200AE*1 GM1JE55200AE*1 13 13 25.4 Colored diffusion ZV JV YV Amber ZS JS YS Sunset orange ZJ JJ YJ Orange ZR JR Red Milky diffusion Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. 19 20.9 123.2 75 14.1 144.1 78 12 290 90 Luminous intensity (mcd) TYP. 19 19 123.3 75 Luminous intensity (mcd) TYP. 13 1.6 × 0.8 (T: 0.35) 1.6 × 0.8 (T: 0.55) 1.6 × 0.8 (T: 0.8) ● ● ● ● ● ● GM1JV35200AE*1 18.8 GM1JV55200AE*1 LT1ZV67A GM1JS35200AE*1 GM1JS55200AE*1 LT1ZS67A GM1JJ35200AE*1 GM1JJ55200AE*1 LT1ZJ67A GM1JR35200AE*1 16.8 78.7 75 16.5 92.7 60 11 170 80 LT1ZG67A 6.1 LT1ZE67A LT1ZR67A 73.9 55 GM1ZV80300AE LT1JV67A*1 LT1ZG40A GM1ZS80300AE LT1JS67A*1 LT1ZS40A GM1ZJ80300AE GM1ZR80300AE 6.2 LT1ZE40A 28.2 LT1ZV40A LT1ZJ40A 127.8 60 9.5 200 70 500 LT1ZR40A 78.7 55 2.0 × 1.25 (T: 0.8) ● ● ● ● ● ● ● ● ● GM1ZV40300AE GM1JV40300AE LT1ZG95A GM1ZS40300AE GM1JS40300AE LT1ZS95A GM1ZJ40300AE GM1JJ40300AE LT1ZJ95A GM1ZR40300AE 3.2 × 2.8 (T: 1.9) 6.0 × 5.0 (T: 2.5) 6.0 × 5.0 (T: 2.3) (board insertion type) 1.6 × 1.15 (T: 0.8) (Side emitting) 2.7 × 1.3 (T: 1.2) (Side emitting) *1 *2 *3 *4 15 LT1ZE95A 45 LT1ZV95A GM5ZR95200AE 100 GM5JV95200AE GM5JS95200AE GM5JJ95200AE GM5ZJ01200A*3 GM5ZV01200A*3 500 GM5YV01210A*4 1 300 GM5ZV03200Z*3 500 GM4JV81200AE*2 35 GM5ZS01200A*3 700 GM5YS01210A*4 1 700 GM5ZS03200Z*3 700 GM4JS81200AE*2 40 GM5ZR01200A*3 400 GM5YJ01210A*4 1 500 GM5ZJ03200Z*3 GM4JJ81200AE*2 500 40 GM5ZR03200Z*3 400 GM4JR81200AE*2 ★ GM4JR81250AE*2 30 (45) ● LT1JV45A*1 20 LT1JS45A*1 24 LT1JJ45A*1 16 LT1JS67A, LT1JV67A, GM1JV55200AE series, GM1JV35200AE series, GM1JV40300AE series, LT1JV45A series: I F = 5 mA GM4JV81200AE series: IF = 10 mA GM5ZR01200A series, GM5ZR03200Z series: I F = 60 mA GM5YV01210A series: IF = 90 mA 100 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED Resin type Outline dimensions (mm) Milky diffusion Colored transparency Colorless transparency HIGH-LUMINOSITY CHIP LED ✩New product ★Under development (I F = 10 mA, Ta = 25°C) ■ HIGH-LUMINOSITY (InGaN) CHIP LEDs (Taped models only) BC Blue Luminous intensity (mcd) TYP. GC Green Luminous intensity (mcd) TYP. GM1GC35200AC 54 Colored diffusion 1.6 × 0.8 (T: 0.35) 1.6 × 0.8 (T: 0.55) 3.2 × 2.8 (T: 1.9) ● ● ● ● ● ● ● ★ GM1BC35370AC*1 ★ GM1BC55270AC*1 23 23 73 120 370 200 300 550 200 300 50 12 ★ GM4GC81250AC GM1GC55200AC GM5GC95200AC*2 ★ GM5GC95250AC*2 47 311 500 GM5BC95200AC*2 ★ GM5BC95250AC*2 ★ GM5BC95270AC*2 GM5BC01200AC*3 ★ GM5BC01250AC*3 ★ GM5BC01270AC*3 GM5GC01200AC*3 ★ GM5GC01250AC*3 520 1 200 6.0 × 5.0 (T: 2.5) ● ● 6.0 × 5.0 (T: 2.3) board insertion type 1.6 × 1.15 × 0.8 (Side emitting) 2.7 × 1.3 × 1.2 (Side emitting) ● ● ● ● GM5BC03200Z* 3 ✩ GM5BC03210Z* 3 ★ GM4BC81250AC GM5GC03200Z* 3 520 170 46 GM4BC13300AC GM4GC13300AC *1 GM1BC35370AC, GM1BC55270AC: IF = 5 mA *2 GM5BC95200AC series, GM5BC95250AC series: I F = 20 mA *3 GM5BC01200AC series, GM5BC01250AC series, GM5BC03200Z series: I F = 50 mA Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 101 LED CHIP LED ■ CHIP LEDs (Taped models only) Resin type Colorless transparency Colored transparency (IF = 20 mA*1, Ta = 25°C) LED K Luminous intensity (mcd) TYP. E FEG Luminous intensity (mcd) TYP. Yellow-green H HY Luminous intensity (mcd) TYP. 11.5 9.8 8.3 10.8 Milky diffusion Outline dimensions (mm) Colored diffusion Green Yellow 1.6 × 0.8 (T: 0.35) 1.6 × 0.8 (T: 0.55) 1.6 × 0.8 (T: 0.6) 1.6 × 0.8 (T: 0.8) 2.0 × 1.25 (T: 0.8) 3.2 × 2.8 (T: 1.9) 1.6 × 1.15 × 0.8 (Side emitting) 2.7 × 1.3 × 1.2 (Side emitting) ● ● ● ● ● ● ● ● ● GM1EG35200A GM1EG55200A LT1E97A LT1E67A LT1F67A LT1F67AF LT1E40A GM5EG95200A GM4EG81200A LT1E45A 19 19 23 23 19 18.1 20 29 GM1HY55200A LT1H97A LT1H67A LT1H40A LT1K67A LT1K40A 3.8 5 Resin type Colorless transparency Colored transparency S HS Luminous intensity (mcd) TYP. D HD Luminous intensity (mcd) TYP. U UR Red (HL) Luminous intensity (mcd) TYP. P Luminous intensity (mcd) TYP. 1.6 1.3 1.3 Milky diffusion Outline dimensions (mm) Colored diffusion Sunset orange Red Red 1.6 × 0.8 (T: 0.55) 1.6 × 0.8 (T: 0.6) 1.6 × 0.8 (T: 0.8) 2.0 × 1.25 (T: 0.8) 3.2 × 2.8 (T: 1.9) *1 P (Red) series: IF = 5 mA ● ● ● ● ● GM1HS55200A LT1S97A LT1S67A LT1S40A 11.4 8.2 6.9 9.4 GM1HD55200A LT1D97A LT1D67A LT1D40A GM5HD95200A 12.5 11 8.8 11.9 13.8 GM1UR55200A LT1U97A LT1U67A LT1U40A GM5UR95200A 29.7 35.3 29.7 35.6 80 LT1P97A LT1P67A LT1P40A HL: High-luminosity LT1D67A series LT1ZR67A series LT1JS67A series GM1ZV80300AE series LT1D97A series GM1EG55200A series GM1JV55200AE series GM1BC55250AC series LT1E40A series LT1ZE40A series GM1JV40300AE series GM1ZV40300AE series GM1JV35200AE series GM1EG35200A GM1BC35200AC series GM1BC35310AC LT1E45A series LT1JV45A series GM4BC13300AC series GM4JV81200AE series GM4EG81200A GM4BC81250AC series LT1ZR95A series GM5JV95200AE series, GM5EG95200A series GM5BC95200AC series, GM5BC95250AC series GM5ZR01200A series, GM5BC01200AC series GM5BC01250AC series, GM5YV01210A series GM5ZV03200Z series GM5BC03200Z series Taped model 102 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED ■ HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (Taped models only) (I F = 20 mA, [Blue, Green: I F = 10 mA], Ta = 25°C) Resin type Outline dimensions (mm) 1.6 × 1.6 (T: 0.8) Milky diffusion Colored transparency Colorless transparency CHIP LED ★Under development ZV BC Amber + Blue Luminous intensity (mcd) TYP. 43.8/14.4 ZS GC Sunset orange + Green Luminous intensity (mcd) TYP. GM1ZSG80300A 66/46.1 (I F = 40 mA, Ta = 25°C) Colored diffusion ● GM1ZVB80300A Resin type Outline dimensions (mm) 6.0 × 5.0 (T: 2.5) Milky diffusion Colored transparency Colorless transparency BC GC Blue + Green Luminous intensity (mcd) TYP. 300/860 BC ZR Blue + Red Luminous intensity (mcd) TYP. 300/580 GC ZR Green + Red Luminous intensity (mcd) TYP. 860/580 Colored diffusion ● GM5BG01210A GM5ZRB01210A GM5ZRG01210A ■ DICHROMATIC TYPE CHIP LEDs (Taped models only) Resin type Outline dimensions (mm) 1.6 × 1.6 (T: 0.8) Milky diffusion Colored transparency Colorless transparency (I F = 20 mA, Ta = 25°C) EH Yellow-green + Yellow Luminous intensity (mcd) TYP. LT1EH67A 19/8.3 ED Yellow-green + Red Luminous intensity (mcd) TYP. LT1ED67A 19/8.3 Colored diffusion ● GM5BG01210A series LT1ED67A series GM1ZVB80300A series ■ HIGH-LUMINOSITY WHITE TYPE CHIP LEDs (with blue chip) (Taped models only) (Ta = 25°C) Outline dimensions (mm) 3.2 × 2.8 (T: 1.9) 6.0 × 5.0 (T: 1.5) 6-terminal leadless 6.0 × 5.0 (T: 2.5) 4-terminal leadless *1 GM5BW95300A: IF = 20 mA Color coordinates (x, y) BW Radiation color White Luminous intensity (mcd) TYP. 1 100 4 200 1 800 (0.31, 0.3) (0.31, 0.31) (0.31, 0.31) White White White ★ GM5BW95300A* 1 ★ GM5BW01300A* 3 ★ GM5BW01301A* 2 *2 GM5BW01301A: I F = 40 mA *3 GM5BW01300A: I F = 35 mA/chip GM5BW95300A GM5BW01300A GM5BW01301A Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 103 LED CHIP LED ■ WHITE TYPE CHIP LEDs (with blue-violet chip) (Taped models only) Outline dimensions (mm) Color coordinates (x, y) (I F = 40 mA, Ta = 25°C) LED ✩New product ★Under development VA Radiation color Luminous intensity (mcd) TYP. 450 (700) (350) (900) (0.33, 0.33) 6.0 × 5.0 (T: 2.5) 4-terminal leadless (0.34, 0.40) (0.29, 0.27) (0.30, 0.50) White Yellowish white Purplish white Greenish white GM5VA33331AC ★ GM5VA34400AC ★ GM5VA29270AC ★ GM5VA30500AC ( ) indicates reference value. GM5VA33331AC ■ HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (RGB 3-color) (Taped models only) (Ta = 25°C) Resin type Colored transparency Colored diffusion Milky diffusion Outline dimensions (mm) 1.6 × 1.6 (T: 0.55) 1.6 × 1.6 (T: 0.8) 6.0 × 5.0 (T: 2.5) 4-terminal leadless Colorless transparency WA Red + Green + Blue Luminous intensity (mcd) TYP. ★ GM1WA55360A*1 ● ● ● ● ● ● ● ● ● ● ● ● GM1WA80350A*2 GM5WA02200A*3 GM5WA06203A*3 GM5WA06210A*4 GM5WA06250A*5 GM5WA06260A*3 GM5WA06270A*6 GM5WA06200Z*3 GM5WA06203Z*3 GM5WA06250Z*4 ✩ GM5WA05360A*6 125/150/55 80/92/30 850 [Mixed color] 850 [Mixed color] 250/400/350 1 400 [Mixed color] 1 725 [Mixed color] 3 000 [Mixed color] 850 [Mixed color] 850 [Mixed color] 1 400 [Mixed color] 2 200 [Mixed color] 6.0 × 5.0 (T: 2.5)*7 6-terminal leadless 6.0 × 5.0 (T: 2.3 [resin part]) 6-terminal 6.0 × 5.0 (T: 1.5) 6-terminal leadless *1 *2 *3 *4 *5 *6 *7 GM1WA55360A: IF = 10 mA (Red, Green, Blue) GM1WA80350A: IF = 20 mA (Red), IF = 10 mA (Green, Blue) GM5WA02200A, GM5WA06203A, GM5WA06260A, GM5WA06200Z, GM5WA06203Z: I F = 40 mA (Red, Green), IF = 20 mA (Blue) GM5WA06210A: IF = 40 mA (Red, Green, Blue) GM5WA06250A, GM5WA06250Z: IF = 35 mA (Red, Green), IF = 20 mA (Blue) GM5WA06270A, GM5WA05360A: IF = 35 mA (Red, Green, Blue) GM5WA06270A: T: 2.4 mm GM1WA55360A GM1WA80350A GM5WA02200A GM5WA06203A GM5WA06210A GM5WA06250A GM5WA06260A GM5WA06200Z GM5WA06203Z GM5WA06250Z GM5WA06270A GM5WA05360A 104 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED Model No. GW01M59001PE LEDs FOR CAMERA DATA BACK / LED DRIVERS ★Under development (I F = 1 mA, Ta = 25°C) ■ LEDs FOR CAMERA DATA BACK No. of dots 7 Outline dimensions (mm) 2.6 × 2.9 (T: 0.9) Surface-mount type Radiation color Amber Luminous intensity (mcd) (MIN. 0.4 TYP. 0.8) ( ) indicates reference value. GW01M59001PE ■ LED DRIVERS Model No. Description Function • Output current (constant-current sink outputs) : 30 mA (MAX.) (setup by external resistor) • Graduation function (clock cycle setting or external synchronization) • Independent current control for three systems (for RGB LED) • LED drive voltage : 15 V • Rated output voltage : 20 V (MAX.) • fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection) • Output current (constant-current sink outputs) : 60 mA (MAX.) (setup by external resistor) • Rated output voltage : 7 V (MAX.) • fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection) • Output current : 155 mA/ch (MAX.) (3ch) (in flash mode) • Control by I2C bus • Illumination mode (64 levels/ch) • Flash mode (32 levels/ch) • Brightness adjustment • Output current : 20 mA (MAX.) (setup by external resistor) • Independent current control for two systems (4 outputs and 2 outputs) • LED non-connected judging function • Brightness adjustment • Output current : 20 mA (MAX.) • LED non-connected judging function • Brightness adjustment Supply voltage (V) Package ★IR2D20N/U 24-dot LED panel driver with constant-current sink outputs 4.5 to 5.5 P-SSOP056-0600/ P-HQFN052-0707 ★IR2D07N1 16-dot LED panel driver with constant-current sink outputs 3.0 to 5.5 P-SSOP040-0300 ★IR2E46U6/Y6 RGB LED driver for flash lights and illuminations 2.7 to 4.5 P-VQFN032-0505/ WL-CSP*1 ★IR2E47U6 White LED driver for back light P-VQFN024-0404 (*2) 2.7 to 5.5 P-VQFN024-0404 ★IR2E48U6 *1 WL-CSP : Waferr-level CSP *2 Contact a SHARP sales office regarding a wafer-level CSP. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 105 LED