GP522

GP522 Controller Chip PRELIMINARY DATA SHEET FEATURES • 8 programmable resistors • 1 programmable switch • conforms to communication standard for programmable devices P/N 30381-000 DESCRIPTION GP522 The GP522 is a single memory controller chip, designed as an array of resistors used to control functions of any signal processing integrated circuit. Controller consists of eight digitally programmable resistors and one switch. The GP522 can be programmed by any programmer supporting communication standard for programmable devices P/N 30381-00. PACKAGING Chip (169 x 81 mils) Au Bump R1A GP522 VBAT SDA 20 GND 69k5 Non-volatile memory (EEPROM) 5 10 R2A 6 R5A 4 R4A 8 R7A 1 R8A 21 R3A 16 R6A 13 R3 17 Programming Interface R1 R2 R5 R4 R7 R8 200k R6 11 R3C 49k5 100k 200k 500k 100k 12 R6C 200k SW 7 2 SW2 9 3 19 R8B 15 R3B 14 R6B All resistors in ohms, all capacitors in farads, unless otherwise stated. SW1 R4B R7B BLOCK DIAGRAM Revision Date: November 1999 Document No. 522 - 21 - 02 GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 tel. +1 (905) 632-2996 Web Site: www.gennum.com E-mail: hipinfo@gennum.com ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Minimum Voltage on any pad Maximum Voltage on SDA pad Maximum Voltage on any other pad ESD rating of SDA pad ESD rating of any other pad Operating Temperature Range Storage Temperature Range VALUE PAD CONNECTION R8A R7A 1 21 2 20 19 18 17 16 GND R8B EXCLK SDA 1.4V DC -0.5V DC 17.5V DC VBAT ± 1500V ± 2000V 0°C to 40°C -40°C to 70°C SW2 R3A GP522 R7B 3 9 10 15 11 12 13 14 R3C R6C R6A R6B R3B GP522 4 5 6 7 8 R5A VBAT R2A SW1 R4A R4B R1A CAUTION ELECTROSTATIC SENSITIVE DEVICES DO NOT OPEN PACKAGES OR HANDLE EXCEPT AT A STATIC-FREE WORKSTATION CAUTION ULTRA VIOLET RADIATION SENSITIVE ELECTRICAL CHARACTERISTICS PARAMETER Supply Voltage Supply Current EEPROM read/write cycles Clock Frequency SW Resistance (ON) SW Leakage (OFF) Data 0 - Input Current Data 0 - Input Current Data 1 - Input Current Data 1 - Input Current PROGRAMMING OPERATION Programming Voltage Programming Current Data to Program Pulse Program Pulse Rise Time Program Pulse Fall Time Pulse Width Data Bit Cycle Synchronization Conditions: Temperature 25oC. SYMBOL VBAT IDD IDDq CONDITIONS MIN 1.1 40 TYP 1.25 45 5 150 -60 -30 +60 +30 MAX 1.4 50 225 1 1 +20% +40% +20% +40% UNITS V µA µA cycles kHz kΩ µA µA µA µA µA Current reference disabled 1000 ƒCLOCK RON ILEAK Calibrated value 120 - Write Read Write Read -20% -40% -20% -40% VPRGM IPRGM tPDATAPRG tPRGRISE tPRGFALL tWPR tCYCLE tSYNC Fig. 1 15.5 - 16 100 1.28 tCYCLE/6 16.5 10 2 1.5 10 1.60 - V µA ms ms ms ms ms Fig. 1 Fig. 1 Fig. 1 Fig. 1 1 1 0.5 5 0.85 - NOTE: During Power Down resistors go to the maximum values. 522 - 21 - 02 2 tWPR VPRGM GP522 Vbat GND tPDATAPRG tPRGRISE tPRGFALL Fig. 1 Programmer Program Pulse Timing R1 [CROSSOVER] = 69.5kΩ ± 25% DC referenced to VSS, AC = 0,0mVRMS. TAP 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BIT 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 BIT 2 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 BIT 3 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 BIT 4 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 RATIOMETRIC VALUE (%) 100.0 86.33 74.10 63.31 55.31 44.87 38.08 30.86 26.12 21.58 15.93 12.40 9.37 6.25 3.95 N/A RATIOMETRIC TOLERANCE (±%) N/A 7 7 7 7 9 9 9 12 12 12 16 22 23 28 N/A NOMINAL TAP VALUE 69.5 60.0 51.5 44.0 38.4 31.2 27.2 21.4 18.2 15.0 11.1 8.62 6.51 4.35 2.75 0.5 MAX UNITS kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ 3 522 - 21 - 02 R2 [THRESHOLD] = 49.5kΩ ± 25% DC referenced to VSS, AC = 0, 0mVRMS. TAP BIT 5 BIT 6 BIT 7 BIT 8 RATIOMETRIC VALUE (%) 100.00 82.64 68.62 54.75 46.06 36.02 30.38 24.64 20.27 13.58 10.91 7.47 5.88 3.88 2.42 N/A RATIOMETRIC TOLERANCE (±%) N/A 7 9 9 9 9 11 11 12 16 23 16 20 22 32 N/A NOMINAL TAP VALUE 49.5 40.9 34.0 27.1 22.8 17.8 15.0 12.2 10.0 6.72 5.40 3.70 2.91 1.92 1.20 0.15 MAX UNITS 0 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ GP522 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R3 [LOW RATIO] = 100kΩ ± 40% DC referenced to VSS + Vbe, AC = 100,100mVRMS. TAP BIT 9 BIT 10 BIT 11 BIT 12 RATIOMETRIC VALUE (%) N/A 7.14 13.67 19.509 27.37 33.40 40.40 46.70 53.50 59.40 67.17 73.50 80.00 86.50 93.50 100.00 RATIOMETRIC TOLERANCE (±%) N/A 14 11 9 7 7 7 7 7 7 7 7 7 7 7 N/ A NOMINAL TAP VALUE 0.5 MAX 14.3 27.3 39.0 54.7 66.8 80.8 93.4 107 119 134 147 160 173 187 200 UNITS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ 522 - 21 - 02 4 R4 [LOW CUT] = 200kΩ ± 25% DC referenced to VSS + 400mV, AC = 140, 140mVRMS. TAP BIT 13 BIT 14 BIT 15 BIT 16 RATIOMETRIC VALUE (%) 100.00 71.71 50.00 35.76 24.40 16.40 11.11 6.93 6.80 5.30 3.78 2.55 1.98 1.46 1.18 N/A RATIOMETRIC TOLERANCE (±%) N/A 7 7 7 9 9 11 11 7 14 14 17 17 17 22 N/A NOMINAL TAP VALUE 200 143 102 71.5 48.8 32.8 22.2 13.9 13.6 10.6 7.57 5.10 3.95 2.91 2.37 0.14 MAX UNITS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ GP522 R5 [OUTPUT] = 100kΩ ± 25% DC referenced to VSS, AC = 0,0mVRMS. TAP BIT 17 BIT 18 BIT 19 BIT 20 RATIOMETRIC VALUE (%) 100.00 85.26 72.07 60.00 50.00 42.00 36.50 30.30 25.63 20.58 18.30 15.91 13.74 10.58 9.38 7.90 RATIOMETRIC TOLERANCE (±%) N/A 7 7 7 7 7 7 9 9 11 11 11 11 16 16 N/A NOMINAL TAP VALUE 100 85.3 72.1 60.0 50.0 42.0 36.5 30.3 25.6 20.6 18.3 15.9 13.7 10.6 9.38 7.90 UNITS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ 5 522 - 21 - 02 R6 [HIGH RATIO] = 200kΩ ± 40% DC referenced to VSS + Vbe, AC = 1000, 100mVRMS. TAP BIT 21 BIT 22 BIT 23 BIT 24 RATIOMETRIC VALUE (%) N/A 7.14 13.67 19.60 27.10 33.40 40.40 47.17 53.50 60.00 67.17 73.50 80.00 86.50 93.50 100.00 RATIOMETRIC TOLERANCE (±%) N/A 15 10 7 7 7 7 7 7 7 7 7 7 7 7 N/A NOMINAL TAP VALUE 0.5 MAX 14.3 27.3 39.2 54.2 66.8 80.8 94.3 107 120 134 147 160 173 187 200 UNITS 0 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ GP522 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R8 [HIGH CUT] = 100kΩ ± 25% DC referenced to VBAT, AC = 880, 880mVRMS. TAP BIT 30 BIT 31 BIT 32 BIT 33 RATIOMETRIC VALUE (%) 100 12.06 7.17 6.16 4.22 3.65 2.62 2.28 1.88 1.68 1.23 0.90 0.71 0.56 0.44 N/A RATIOMETRIC TOLERANCE (±%) N/A 12 13 12 12 12 12 12 12 12 12 12 12 12 14 N/A NOMINAL TAP VALUE 100 12.1 7.17 6.16 4.22 3.65 2.62 2.28 1.88 1.68 1.23 0.90 0.71 0.56 0.44 0.14 MAX UNITS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ 522 - 21 - 02 6 R7 [GAIN] = 500kΩ ± 25% DC referenced to VSS + Vbe, AC = 0, 210mVRMS. TAP BIT 25 BIT 26 BIT 27 BIT 28 BIT 29 RATIOMETRIC VALUE (%) 100.00 89.97 81.43 75.02 68.34 60.88 55.31 45.29 35.00 28.40 17.32 15.60 8.67 6.40 4.20 3.10 2.31 1.50 1.16 0.73 0.56 0.42 0.32 N/A RATIOMETRIC TOLERANCE (±%) N/ A 7 7 7 7 7 7 7 7 7 7 7 10 10 10 12 14 21 22 22 22 22 22 N/A NOMINAL TAP VALUE 500 450 407 375 342 304 277 226 175 142 86.6 78.0 43.4 32.0 21.0 15.5 11.6 7.50 5.78 3.66 2.80 2.10 1.58 0.15 MAX UNITS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ GP522 R1A R2A 6 R5A 4 8 R4A 1 R7A 21 R8A 16 R3A 13 R6A GP522 5 VBAT 17 SDA 20 GND Non-volatile memory (EEPROM) Programming Interface 10 R3 R1 R2 R5 R4 R7 R8 200k R6 11 R3C 69k5 49k5 100k 200k 500k 100k 12 R6C 200k SW 7 2 SW2 9 3 19 R8B 15 R3B 14 R6B All resistors in ohms, all capacitors in farads, unless otherwise stated. SW1 R4B R7B Fig. 2 Production Test Circuit 7 522 - 21 - 02 PAD LAYOUT PAD NO. X Y CHIP DIMENSIONS 4293 MAX (169 MAX ) 185 (7.28) 1 2 3 4 0 [0.0] 564 [22.2] 1123 [44.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1123 [44.2] 564 [22.2] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0] 379 [14.9] 633 [24.9] 900 [35.4] 1903 [74.9] 2157 [84.9] 2411 [94.9] 2665 [104.9] 3161 [124.4] 3415 [134.4] 3669 [144.4] 3923 [154.4] 3923 [154.4] 3923 [154.4] 3923 [154.4] 3536 [139.2] 1707 [67.2] 1276 [50.2] 3079 [121.2] 185 (7.28) 1 21 20 19 18 16 17 Cell 0,0 2 GP522 3 4 5 6 7 8 9 10 15 11 12 13 14 GP522 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 2057 MAX (81 MAX) SPECIFICATIONS DIE THICKNESS MIN BOND PAD OPENING BUMP SPEC DOCUMENT 254µm [10mils] MAX Dimensions are in micrometers. Dimensions shown in parenthesis are in mils converted from micrometers, and include minor rounding errors. 1 mil = 25.4µm Attention: The GP522 Controller Chip is visually inspected at an AQL of 0.65% based on MILSTD105E sampling plan, rather than being subjected to 100% visual inspection. GENNUM CORPORATION MAILING ADDRESS: P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 Tel. +1 (905) 632-2996 Fax +1 (905) 632-2814 SHIPPING ADDRESS: 970 Fraser Drive, Burlington, Ontario, Canada L7L 5P5 REVISION NOTES: Corrections to Pad Connection diagram and Electrical Characteristics table. DOCUMENT IDENTIFICATION: PRELIMINARY DATA SHEET The product is in a preproduction phase and specifications are subject to change without notice. GENNUM JAPAN CORPORATION C-101, Miyamae Village, 2-10-42 Miyamae, Suginami-ku, Tokyo 168-0081, Japan Tel. +81 (3) 3334-7700 Fax: +81 (3) 3247-8839 Gennum Corporation assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. © Copyright April 1999 Gennum Corporation. All rights reserved. Printed in Canada. 522 - 21 - 02 8