HG1012JA

Crystal oscillator HIGH-STABILITY HIGH-FREQUENCY OSCILLATOR HG-1012JA/2012JA Product number (please refer to page 2) Q35 1 1 JA0 x x x x x 0 0 Q35 1 2 JA0 x x x x x 0 0 • Cylindrical AT crystal unit built-in, thus assuring high reliability. • Excellent heat resistance. • Low current consumption. Actual size Specifications (characteristics) Specifications Item Output frequency range Max. supply voltage Power source voltage Operating voltage Storage temperature Temperature range Operable temperature Frequency stability Current consumption Duty High output voltage Low output voltage Output load condition Output rise time Output fall time Oscillation start up time Aging Shock resistance Symbol f0 VDD-GND VDD TSTG TOPR ∆f/f0 lop tW/t VOH VOL CL tTLH tTHL tOSC fa S.R. HG-1012JA -0.5 V to +7.0 V 5.0 V ±0.25 V -55 °C to +125 °C -40 °C to +85 °C HG-2012JA Remarks VDD =4.75 V to 5.25 V 1.5000 MHz to 28.63636 MHz Stored as bare product after unpacking Ta= -20 °C to +70 °C Ta= -40 °C to +85 °C No load condition 1/2 VDD level IOH= -0.8 mA IOL=3.2 mA 20 %→80 % VDD level 80 %→20 % VDD level Time at 4.75 V to be 0 s AV: ±20 x 10-6, BV: ±25 × 10-6 BX: ±25 x 10-6, CX: ±30 × 10-6 SV: ±15 x 10-6, AV: ±20 x 10-6 BX: ±25 x 10-6 10 mA Max. 40 % to 60 % VDD -0.4 V Min. 0.4 V Max. 15 pF Max. 8 ns Max. 8 ns Max. 4 ms Max. ±5 x 10-6/year Max. ±10 x 10-6 Max. ±2 x 10-6/year Max. ±2 x 10-6 Max. Ta=+25 °C, first year Three drops on a hard wooden board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2sine wave in 3 directions External dimensions #4 #3 (Unit: mm) Recommended soldering pattern 1.3 (Unit: mm) NO. Pin terminal 1 2 3 4 Ts GND OUT VDD HG2012 AV 1.5000M E 9357A #1 #2 14.0 Max. 9.8 Max. 8.65 0.51 5.08 0.25 Min. 4.7 Max. 4.06 7.62 5.08 Ts terminal should be kept open. 61 0.25 8.8 3.0