JC216C

JC208SN/C, JC216SC AC Solid State Relay JC Features ● ● SERIES Resin casted molding package with heat insulation board Dielectric strength (VISO) between input and output 4,000Vrms ● Conforms to Electrical Appliance Resistration System（For the unit with over 3.0mm distance between AC lines） Type Information J C 2 0 8 S C Standard load voltage 2 ： 100V、 200V On-state load current 08 ： 8A 16 ： 16A Zero-cross-circuit C ： Built-in N ： Not Built-in Characteristics Maximum Load Current VS. Ambient Temperature (JC-08S type) On State Load Current IT (Arms) 9 8 7 6 5 4 3 2 1 0 −25 0 25 50 75 100 125 ⑥ ⑤ ④ ③ ②① Maximum Load Current VS. Ambient Temperature (JC-16S type) On State Load Current IT (Arms) 20 18 16 14 12 10 8 6 4 2 0 −25 0 25 50 75 100 125 ⑤ ④ ③ ② ① 10 Ambient Temperature Ta 〔℃〕 ① With infinite heat sink ④ With heat-sink plate ② With heat-sink plate （A1 plate 75×75×2mm） （A1 plate 200×200×2mm） ⑤ With heat-sink plate ③ With heat-sink plate （A1 plate 50×50×2mm） （A1 plate 100×100×2mm） ⑥ No-heat-sink plate Ambient Temperature Ta 〔℃〕 ① With infinite heat sink ④ With heat-sink plate ② With heat-sink plate （A1 plate 100×100×2mm） （A1 plate 280×280×2mm）⑤ No-heat-sink plate ③ With heat-sink plate （A1 plate 200×200×2mm） ※ Description in the catalogue is subject to change without notice. Please read the specifications thoroughly before using. ※ Please contact JEL SYSTEM for further information. http://www.jelsystem.co.jp E-mail:contact@jelsystem.co.jp 139 S3C-215WDV, S3C-225WDV JC208SN/C, JC216SC Dimensions（mm） 18.5 16.4 φ3.2 ±0.2 ±0.2 ±0.2 ±0.3 ±0.3 5.5 ±0.2 3.2 4.2 ＊ JEL 4-1.2 4-1.25 4-0.8 ① 0.2Max ②③ ④ 11.2 Min 19.6 Model Name  Max ±0.2 5.0 5.08 7.62 2.54 0.6 1.4 ① Output AC） ③ Input ＋） （ （ ② Output AC） ④ Input −） （ （ ※ Caution Use insulation board whenever it is necessary ＊Marked metal parts are not insulated with terminal ①.  Marked parts are non-attachable to outer parts. Equivalent Circuit ①② ③④ Zero-cross circuit （Applicable to JC-SC Type） ※ Description in the catalogue is subject to change without notice. Please read the specifications thoroughly before using. ※ Please contact JEL SYSTEM for further information. http://www.jelsystem.co.jp E-mail:contact@jelsystem.co.jp 140 JC208SN/C, JC216SC ■ Absolute Maximum Ratings Item Rated Line Voltage On State Load Current Peak 1 Cycle Surge Current Output Maximum Load Voltage Peak Repetitive Voltage Off State dI/dt Frequency Input Forward Current Reverse Voltage Dielectric Strength General Operating Temperature Storage Temperature Soldering Temperature Symbols ― IT ISURGE VOMAX VDRM dI/dt f IF VR VISO TOPR TSTG TSOL ＊ 8 （Tc ≦ 80 ℃） （Ta ＝ 25 ℃） JC208SN JC208SC 120、240 ＊ 16 （Tc ≦ 60 ℃） JC216SC Units VACrms Arms A VACrms V A/μm Hz mA V Vrms ℃ ℃ ℃ 80 280 600 50 50、60 50 6 160 4,000（Rh40 ∼ 60 ％、AC60Hz、1min.） − 25 ∼＋ 100 − 30 ∼＋ 125 260（10 sec.） ＊ TC ； case temperature ■ Electrical Characteristics Item Load Voltage Range Peak Repetitive Current On State Voltage Drop Output Holding Current Off State dV/dt Commutation dV/dt Zero Cross Voltage (JC-SC) Input Forward Voltage Reverse Current Minimum Trigger Current Isolation Resistance General Turn On Time Turn Off Time Thermal Resistance Symbols VO IDRM VT IH dV/dt （dV/dt） c VOX VF IR IFT RISO TON TOFF Rth (j-a) VDRM ＝ 600V VT ＝ Rated、IF ＝ 20mA、Resistance load ・ VD ＝ 1 √2 VDRM （600V） VD ＝ 2/3 VDRM （600V） ・ Tj ＝ 125 ℃、VD ＝ 400V、dI/dt ＝＊ Resistance load、IF ＝ 8mA IF ＝ 20mA VR ＝ 3V VD ＝ 6V、RL ＝ 30 Ω Rh40 ∼ 60 ％、DC500V JC208SN (JC208SC、JC216SC) Condition MIN 35 ― ― ― 30 5 ― ― ― ― 1010 ― ― ― TYP ― ― ― ― ― ― ― 1.2 ― ― ― ― ― 60 （Ta ＝ 25 ℃） MAX 280 100 1.5 50 ― ― 35 1.4 100 15 ― 1 (10) 10 ― Units VACrms μA Vrms mA V/μs V/μs V V μA mA Ω ms ms ℃/W ＊ JC-08 Series ； dI/dt ＝− 4.0/ms. JC-16Series ； dI/dt ＝− 8.0/ms. ※ Description in the catalogue is subject to change without notice. Please read the specifications thoroughly before using. ※ Please contact JEL SYSTEM for further information. http://www.jelsystem.co.jp E-mail:contact@jelsystem.co.jp 141 JC208SN/C, JC216SC Forward Current VS. Ambient Temperature 60 Forward Current IF〔mA〕 Forward Current IF〔mA〕 50 40 20 10 0 −25 200 100 50 20 10 5 2 0 25 50 75 100 125 1 0 Forward Current VS. Forward Voltage （Typical value） TA＝100℃ 75℃ 50℃ 25℃ 0℃ −25℃ 1.0 Forward VoltageVF〔V〕 2.0 Ambient Temperature Ta 〔℃〕 On State Power Dissipation VS. On State Load Current 20 18 Power Dissipation〔W〕 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 （JC-08S type）Typical value） （ Maximum Load Current VS. Case Temperature 16 On State Load Current IT (Arms) JC-16S type Ta＝25℃ 14 12 10 8 6 4 2 0 −25 0 25 50 75 100 125 JC-08S type On State Load Current IT〔Arms〕 Case Temperature Tc 〔℃〕 ※ Description in the catalogue is subject to change without notice. Please read the specifications thoroughly before using. ※ Please contact JEL SYSTEM for further information. http://www.jelsystem.co.jp E-mail:contact@jelsystem.co.jp 142 JC208SN/C, JC216SC On State Power Dissipation VS. On State Load Current 20 18 Power Dissipation〔W〕 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 （JC-16S type）Typical value） （ Peak Surge Current VS. Duration （Non Repective） 200 Peak Surge Current ISURGE〔A〕 180 160 140 120 100 80 60 40 20 0 0 2 5 10 20 50 100 JC-08S type JC-16S type JC-08S type f＝50Hz JC-16S type f＝60Hz Tj＝25℃ Start Ta＝25℃ On State Load Current IT〔Arms〕 Duration〔cycles〕 Minimum Trigger Current VS. Ambient Temperature Minimum Trigger Current IFT〔mA〕 Minimum Trigger Current IFT〔mA〕 10 8 6 4 2 0 −25 （JC-08S type）Typical value） （ VD＝12V （JC208SN） VD＝ 6V （JC208SC） RL＝30Ω 10 8 6 4 2 0 −25 Minimum Trigger Current VS. Ambient Temperature （JC-16S type）Typical value） （ VD＝ 6V （JC-16SC type） RL＝30Ω JC208SN JC208SC JC-16SC type 0 25 50 75 100 0 25 50 75 100 Ambient Temperature Ta 〔℃〕 Ambient Temperature〔℃〕 ※ Description in the catalogue is subject to change without notice. Please read the specifications thoroughly before using. ※ Please contact JEL SYSTEM for further information. http://www.jelsystem.co.jp E-mail:contact@jelsystem.co.jp 143 JC208SN/C, JC216SC Relative Peak Repetitive Voltage VDRM ＝Ta〕 VDRM ＝25℃〕 〔Tj / 〔Tj Relative Peak Repetitive Voltage VS. Ambient Temperature 1.3 1.2 1.1 1.0 0.9 0.8 0.7 −25 JC208SN JC208SC （JC-08S type）Typical value） （ Relative Peak Repetitive Voltage VDRM ＝Ta〕 VDRM ＝25℃〕 〔Tj / 〔Tj Relative Peak Repetitive Voltage VS. Ambient Temperature 1.3 1.2 1.1 1.0 0.9 0.8 0.7 −25 JC-16SC type （JC-16S type） 0 25 50 75 100 0 25 50 75 100 Ambient Temperature Ta 〔℃〕 Ambient Temperature Ta 〔℃〕 Peak Repetitive Current VS. Ambient Temperature 10−4 Peak Repetitive Current IDRM〔A〕 VD＝600V （JC208SN/JC208SC type） （JC-08S type） Peak Repetitive Current VS. Ambient Temperature Peak Repetitive Current IDRM〔A〕 10−4 VD＝600V （JC216S type） （JC-16S type） 10−5 10−6 JC208SC JC208SN 10−5 10−6 JC-16SC type 10−7 10−8 10−9 −25 10−7 10−8 10−9 −25 0 25 50 75 100 Ambient Temperature Ta 〔℃〕 0 25 50 75 100 Ambient Temperature Ta 〔℃〕 ※ Description in the catalogue is subject to change without notice. Please read the specifications thoroughly before using. ※ Please contact JEL SYSTEM for further information. http://www.jelsystem.co.jp E-mail:contact@jelsystem.co.jp 144