LDS40361SRA

NO.：QB/SPS 73 PS 1088A SPECIFICATIONS NAME: TYPE: 0.36 inch DIGITAL DISPLAY LDS40361SRA SHENZHEN DITELONG INDUSTRIAL CO.,LTD. SHENZHEN CANDELA ELECTRONIC CO.,LTD. SHENZHEN SUCCESS PHOTOELECTRONICS CO.,LTD SHENZHEN OFFICE Add: Room 1911,Zhongwin Science & Techn.Bldg,Bagua 3th Rd.Bagualing Industry Zone Shenzhen,China Tel: 86-755-25884151 Fax: 86-755-25884659 Post Code: 518029 E-mail: candela@ditelong.com http://www.ditelong.com SHENZHEN FACTORY Add:4/F Ranbao Bldg,NO. 189 Industrial Zone,Henggang,ShenZhen,china Tel:86-755-28630148 28630040 Fax:86-755-28631216 Post Code:518115 3-1 SPECIFICATION NO.：QB/SPS 73 PS 1088A LDS—40361SRA 1．FEATURES • High intensity and reliability. • Low power reguirement • I.C. compatible 2．PACKAGE DIMENSIONS: NOTES: All dimensions are in millimeters,tolerance are ± 0.25 mm unless otherwise noted. 3．INTERNAL CIRCUIT DIAGRAM. 3-2 SPECIFICATION 4．ABSOLUTE MAXIMUM RATINGS Ta=25℃ PARAMETER Power dissipation per segment Peak forward current per segment* Continuous forward current per segment** Reverse voltage per segment Operating temperature range Storage temperature range NOTES: * 1/10 duty cycle 10 mes pulse width ** We advise average forward c urrent is 15mA 5．ELECTRICAL/OPTICAL CHARACTERISTICS ITEM SYMBOL CONDITION min Luminous Intensity Peak Emission Wavelength Spectral Line Half-width Forward Voltage per segment Reverse Current per segment VF IV λP △λ Red Green Red Green Red Green Red Green Red Green — IF=20mA — — IF=20mA — — IF=20mA — — IF=20mA VR=5V VR=5V — — — Ta=25℃ RED 60 80 15 5 NO.：QB/SPS 73 PS 1088A Green UNIT mw mA mA V -35～80 -35～85 ℃ ℃ Solder temperature 1/16 inch below seating plane for 3 seconds at 260℃ RATING typ 9 UNIT max — — — — — — 2.4 — 640 mcd — 35 nm — 2.0 nm — — — — 50 — V μA IR 6．CAUTIONS: a）When being used, do not be over the corresponding limited scale and note in our specification. b）For some products with the static electricity mark, please operate refer to the rules of static electricity fence. c） hen designing, please consider the factor of heat, and taking keep away measure to avoid high W temperature. d）Do not clean the product with organic impregnant as some of them may damage the product. 3-3