LEDRC200N

LED Dome and On-Axis Multi-Light (200 mm) Features • Combining the dome light and on-axis light provides outstanding illumination uniformity • Ideal for extremely difficult specular surfaces • Light intensity for each axis is independently adjustable • Black anodized aluminum housing LED Dome and On-Axis Multi-Light Model Models Illumination Type Color Cable Detachable 1.8 m (6') cable terminated with 9-pin D-sub connectors (male pins) Supply Voltage Supply Current Connections Pin 1 = +V fan Pin 2 = dc common fan Pin 3 = dc common Pin 4 = +V dome Pin 5 = +V on-axis Power supply model PS2V-12(E) is recommended (see other side) LEDRC200N† Continuous highly-diffused dome and on-axis light Red 640 nm 12V dc ±10% with voltage regulation of ±1% 2.2 A max. † This model is not stocked and is non-returnable. Suggested Field-of-view Suggested Stand-off Useful Life Environmental Rating Operating Conditions 75 mm (3") 25 mm (1") 60,000 hours IEC IP20; NEMA 1 Temperature: 0° to 40°C (+32° to 104°F) Maximum relative humidity: 95% at 40°C (non-condensing) 153.2 mm (6.03") 111.1 mm (4.37") 249.3 mm (9.82") ø50.8 mm (2.00") 1/4-20 & M6 x 1.0 (4x) 206.3 mm (8.12") 38.1 mm (1.50") 45.9 mm (1.81") 76.2 mm (3.00") Detachable 1.8 m (6') cable terminated with 9-pin D-sub connectors (male pins) WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. Printed in USA 05/01 P/N 67444 LED Dome and On-Axis Multi-Light (200 mm) Accessories Variable Power Supplies (see data sheet p/n 67449) Models PS2V-12† PS2V-12E† Input 100-140V ac 60 Hz 200-250V ac 50 Hz Input Cord North America (NEMA 5-15) Cont. Europe (Schuko CEE 7) Output 2-channels 6 - 12V dc 2 A max. per channel Output Cable 1.8 m (6') Terminated with 9-pin D-sub connector (female pins) Used with Continuous types: LEDRC200N Extension Cables Models DB906† DB910 † † Length 1.8 m (6') Configuration Used with Continuous types: LEDRC200N Terminated both ends with 9-pin D-sub connector, for continuous lights 3.0 m (10') (one end male pins and opposite end female pins) These models are not stocked and are non-returnable. Banner Engineering Corp., 9714 Tenth Ave. No., Mpls., MN 55441 • Ph: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com