MB145

SCHOTTKY DIE SPECIFICATION Revision 4 5/22/2000 General Description Low Ir 45V 1A Single Anode MB145 ELECTRICAL CHARACTERISTICS DC Blocking Voltage: Average Rectified Forward Current Maximum Instantaneous Forward Voltage @ 1 Amperes, 25 0 @ 2 Amperes, 25 0 SYM Ir = 0.05 mA VRRM IFAV VFMAX VFMAX Spec. Limit 45 1 0.52 0.7 Die Sort 47.5 UNIT Volt Amp Volt Volt 0.51 0.69 Maximum Instantaneous Reverse Voltage VR = 45 Volt, Tc = 250 IRMAX Cj MAX IFSM TJ TSTG DIM Ax Ay Bx By Cx Cy D Die Size Top Metal pad size Passivation Seal Thickness (Min) Thickness (Max) 0.05 80 40 -65 to +125 -65 to +12 ITEM um 1000 1000 860 860 963 963 228 254 0.04 mA pF Maximum Junction Capacitance at 0V, 1MHz MAXIMUM RATINGS Nonrepetitive Peak Surge Curren Operating Juntion Temperatur Storage Temperature AMP 0 C 0 C mil 39.3 39.3 33.8 33.8 37.9 37.9 9.0 10.0 SCRIBE INSTRUCTION: Die performance is assured providing the die separation process leaves the Passivation Seal free of any visible damage. This die is designed to meet the following specifications: 10BQ040, B140HB Please refer to FabTech SBR-Series Ordering Guide to create a complete part numbers for ordering. Complete part number will specify metalization and delivery options. Specifications apply to die only. Actual performance may degrade when assembled. FabTech does not guarantee device performance after assembly. Datasheet Information is subject to change without notice. 777 N.W. Blue Parkway, Suite 350 • Lee's Summit, MO 64086-5709 • TEL (816) 251-8800 • FAX (816) 251-8850 S5627