MT5-2412WI

MT5 5 WATT DC/DC CONVER TER SINGLE & MULTIPLE OUTPUTS ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load INPUT SPECIFICATIONS Input Voltage Range........................ 2:1 Wide Range Input OUTPUT SPECIFICATIONS Ripple Noise.....................................150 mVp-p (DC to 20MHZ) Line Regulation................................ ±0.5% max. Line Filter......................................... Built-in FEATURES 5 SIDED METAL CASE WIDE INPUT RANGE HIGH EFFICIENCY AND RELIABILITY, UP TO 87% HIGH I/O ISOLATION 1500VDC INPUT FILTER TO MEET EN 55022-A, FCC-A, CISPR 22-2 CLASS A NO DERATING TO 71˚C LOW OUTPUT RIPPLE AND NOISE SHORT CIRCUIT PROTECTION DIRECT PCB-SOLDERING INDUSTRY STANDARD PINOUT (IC-24P) LOW PROFILE, 10mm (0.39”) HEIGHT FIVE YEAR WARRANTY Load Regulation............................... Single: ±1.0% max. (10% ~ 100%) Dual: ±3.0% max. (10% ~ 100%) GENERAL SPECIFICATIONS Isolation Voltage Primary to Secondary............... 1500 VDC Primary to Case........................ 750 VDC Secondary to Case.................... 750 VDC MTBF.............................................. >1,000,000 hours Isolation Resistance........................ INPUT-OUTPUT-CASE 1000M-ohms min. (Measured at 500 VDC) Short-Circuit Protection................... Continuous ENVIRONMENTAL SPECIFICATIONS Operating Temperature ................... -25˚C ~ +71˚C Temperature Coefficient...................±0.05% / °C Humidity........................................... 30%~95% RH Storage Temperature....................... -25°C ~ +85°C EMI Complys with: CISPR CLASS A PHYSICAL SPECIFICATIONS Case Material.....................................Nickel-Plated Steel Dual In-Line Pin Configuration 10 Series MODEL MT5-2405SI MT5-2412SI MT5-2412WI MT5-2415WI MT5-4805SI MT5-4812SI MT5-4812WI MT5-4815WI INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT 5.1 VDC 12 VDC ±12 VDC ±15 VDC 5.1 VDC 12 VDC ±12 VDC ±15 VDC 1000mA 500mA ±250mA ±200mA 1000mA 500mA ±250mA ±200mA INPUT CURRENT 16mA 22mA 33mA 35mA 10mA 12mA 14mA 12 mA DUAL OUTPUT 2, 3 22, 23 11 14 9, 16 INPUT - V INPUT + V OUTPUT - V OUTPUT + V COMMON EFFICIENCY 83% 86% 85% 86% 84% 87% 87% 87% 24 VDC (18 ~ 36V) 48 VDC (36 ~ 72V) SINGLE OUTPUT 2, 3 22, 23 9, 10 11, 15 16 14 INPUT - V INPUT + V NC NC OUTPUT - V OUTPUT + V NOTE: All specifications typical and nominal / full load and 25˚C unless otherwise noted.. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. Dimensions in mm 11