MXO45-2I

MXO45/MXO45HS Metal DIP Clock Oscillator ♦ Stability to ±20 PPM ♦ +5.0Vdc Operation ♦ CMOS/TTL Compatible ♦ Operating Temperature to –40°C to +85°C ♦ Output Enable Option ♦ 14 Pin and 8 Pin Packages Electrical Characteristics Parameter Output Frequency Range Stability (Note 1) ( See Ordering Information) Supply Voltage Operating Supply Current Symbol fO ∆f/f Conditions - Min 1.0 - Typical - Max 105.561 20,25,50 or 100 5.5 12 25 40 60 85 50 30 15 10 0.4 -16 +16 55 60 55 8 5 3 10 - Unit MHz ppm V CC ICC 1.0 MHz to 7.0 MHz 7.1 MHz to 25 MHz 25.1 MHz to 50 MHz 50.1 MHz to 70 MHz 80.1 MHz to 105.561 MHz CL=50pF CL=50pF CL=50pF CL=30pF CL=15pF Vcc-0.4V Vcc-0.6V V CC = 4.5V VCC = 4.5V 45 40 45 CL=50pF CL=30pF CL=15pF See ‘Enable Truth Table’ on Page 2 or 3 Peak - Peak 5 15 30 40 45 mA 4.5 5.0 V Output Load CMOS TTL Output Voltage Levels Logic '1' Level Logic '0' Level Output Current Output Duty Cycle (50% Level) Rise & Fall Time (10% - 90% Level) CL 1.0 MHz to 50 MHz 50.1 MHz to 70 MHz 70.1 MHz to 105.561 MHz 1.0 MHz to 105.561 MHz V OH V OH V OL IOH IOL SYM CMOS Load TTL Load CMOS or TTL Load V OH = 3.9V V OL = 0.4V PF TTL V mA 1.0 MHz to 50 MHz 50.1 MHz to 70 MHz 70.1 MHz to 105.561 MHz tR, tF 1.0 MHz to 25 MHz 25.1 MHz to 70 MHz 70.1 MHz to 105.561 MHz % 5 3 2 - nS Start Up Time Enable Function (Note 2) Phase Jitter tj 30 50 pS mS - Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and first year aging at an average operating temperature of 40 °C. 2. Reference CTS Application Note 014-0002-0. ♦ ♦ ♦ CTS Communications Components, Inc . ♦ 171 Covington Drive ♦ Bloomingdale, IL 60108 ♦ 630-924-3500 ♦ ♦ ♦ Document No. 008-0258-0 Page 1 of 3 Rev. A ECO# 16710 MXO45/MXO45HS Metal DIP Clock Oscillator ORDERING INFORMATION − − MXO M Package Type 45 = 14 Pin DIP/STD Output 45T = 14 Pin DIP/Tristate Output 45HS = 8 Pin DIP/STD Output 45HST = 8 Pin DIP/Tristate Output Frequency Stability 6 = ±20 ppm 5 = ±25 ppm 3 = ±50 ppm 2 = ±100 ppm Example P/N: MXO45 – 3C – 32M7680 or MXO45HS – 3C – 32M7680 Frequency in MHz M – Indicates decimal point. Frequency shall be recorded with 4 significant digits minimum to the right of the “M”. Operating Temperature Range C = -20°C to +70° C I = -40°C to +85°C MECHANICAL SPECIFICATIONS DIP 14 20.574 .810 5.080 MAX .200 6.350 ± .508 .250 ± .020 .432/.508 .017/.020 .711 ± .330 .028 ± .013 1.524 TYP. .060 1.524 TYP. .060 7.620 ± .127 .300 ± .005 MAX DENOTES PIN 1 FOR REFERENCE ONLY. THE NUMBERS ARE NOT MARKED ON BOTTOM. 1 7 12.954 .510 MAX 14 8 MXO45 32M7680 CTS 3C • YYWW ** KEY: MM INCH 15.240 ± .127 .600 ± .005 Marking Notes: 1. Frequency marked with 4 significant digits after the “M” 2. CTS XX – stability/temp. code. 3. ** – Manufacturing site code PIN CONNECTIONS Pin 1 7 8 14 Symbol EOH GND Output V CC Function Output Enable or NC Circuit and Package Ground RF Output Supply Voltage Enable Truth Table Pin 1 “1” “0” Open Pin 8 Output High Imp. Output ♦ ♦ ♦ CTS Communications Components, Inc . ♦ 171 Covington Drive ♦ Bloomingdale, IL 60108 ♦ 630-924-3500 ♦ ♦ ♦ Document No. 008-0258-0 Page 2 of 3 Rev. A ECO# 16710 MXO45/MXO45HS Metal DIP Clock Oscillator DIP 8 DENOTES PIN 1 5.080 MAX .200 6.350 ± .508 .250 ± .020 .432/.508 .017/.020 2.540 .100 7.620 ± .127 MXO45HS 32M7680 CTS 3C • Y YWW ** FOR REFERENCE ONLY. THE NUMBERS ARE NOT MARKED ON BOTTOM. 1 .660/1.016 .026/.040 12.954 .510 MAX 4 7.620 ± .127 .300 ± .005 8 5 KEY: MM INCH .300 ± .005 12.954 MAX .510 NOTE: 3 OR 4 STANDOFFS ALLOWED Marking Notes: 1. Frequency marked with 4 significant digits after the “M” 2. CTS XX – stability/temp. code. 3. ** – Manufacturing site code PIN CONNECTIONS Pin 1 4 5 8 Symbol EOH GND Output V CC Function Output Enable or NC Circuit and Package Ground RF Output Supply Voltage Enable Truth Table Pin 1 “1” “0” Open Pin 5 Output High Imp. Output ENVIRONMENTAL SPECIFICATIONS § § § § § § § § § Storage Temperature: Temperature Cycle: Mechanical Shock: Sinusoidal Vibration: Gross Leak: Fine Leak: High Temperature Operating Bias: Frequency Aging: Solderability: -55°C to +125°C 400 cycles, -55°C to +125°C, 10 min dwell, 1 min transfer 1,500g’s, 0.5mS, ½ sinewave, 3 shocks each direction, in 3 planes 0.06” D.A., 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles per plane No leak shall appear while immersed in an FC40 or equivalent liquid at 125°C for 20 seconds Mass spectrometer leak rates less than 2x10-8 cc/sec air equivalent 2,000 hours at 125°C, disregarding frequency shift < 5 ppm shift in 1,000 hours at 85°C 90% coverage using: (no pre-conditioning required) A) R Flux B) Solder bath temperature of 245°C ± 5°C C) Solder composition 63% Sn/ 37% Pb QUALITY AND RELIABILITY Quality Systems meet or exceed the requirements of ISO 9000: 2000 standards. Reliability Audits are performed on this or similar products with results available upon request. ♦ ♦ ♦ CTS Communications Components, Inc . ♦ 171 Covington Drive ♦ Bloomingdale, IL 60108 ♦ 630-924-3500 ♦ ♦ ♦ Document No. 008-0258-0 Page 3 of 3 Rev. A ECO# 16710