NCH080C3

SaRonix Crystal Clock Oscillator Technical Data Frequency Range: Frequency Stability: 0.5 MHz to 106.25 MHz ±20, ±25, ±50 or ±100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, 30 day aging, shock and vibration. 3.3V, LVCMOS / HCMOS, Tri-State NTH / NCH Series Temperature Range: Operating: Storage: Supply Voltage: Recommended Operating: Supply Current: ACTUAL SIZE 0 to +70°C or -40 to +85°C, See Part Numbering Guide -55 to +125°C 3.3V ±10% 20mA 25mA 30mA 35mA max, 0.5 to 30 MHz max, 30+ to 50 MHz max, 50+ to 80 MHz max, 80+ to 106.25 MHz Description A crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case to reduce EMI. True SMD DIL14 versions for IR reflow are available, select option "S" in part number builder. See separate data sheet for SMD package dimensions. Applications & Features • • • • • • • • • • • ADSL, DSL DS3, ES3, E1, STS-1, T1 Ethernet Switch, Gigabit Ethernet Fibre Channel Controller MPEG Network Processors Voice Over Packet 32 Bit Microprocessors Tri-State output on NTH LVCMOS / HCMOS compatible Available up to 106.25 MHz Output Drive: HCMOS Symmetry: Rise and Fall Times: 45/55% max 0.5 to 70 MHz max 40/60% max @ 50% VDD 4ns max 0.5 to 50 MHz, 20% to 80% V DD 3ns max 50+ to 80 MHz 1.5ns max 80+ to 106.25 MHz 10% VDD max 90% VDD min 50 pF, 0.5 to 50 MHz 30pF, 50+ to 70 MHz 15pF, 70+ to 106.25 MHz 8ps max Logic 0: Logic 1: Load: Period Jitter RMS: Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-202, Method 2002, Condition B Method 2003 Method 2004, Conditions A & C Method 2007, Condition A Method 215 Method 210, Condition A, B or C MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method 1014, Condition C 1014, Condition A2 1011, Condition A 1004 Output Waveform CMOS Tr Logic 1 80% VDD 50% VDD 20% VDD Logic 0 Tf SYMMETRY DS-159 REV D S aRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894 SaRonix Crystal Clock Oscillator Technical Data Package Details FULL SIZE PACKAGE 0.91 .036 max 21.0 max .825 5.08 max .200 .46±.08 .018±.003 15.24±.13 .600±.005 Pin 7 GND 6.35±0.51 0.25±0.02 3.3V, LVCMOS / HCMOS, NTH / NCH Series Part Numbering Guide NTH 0 8 0 C NTH = Pin 1: Tri state, LVCMOS NCH = Pin 1: N/C, LVCMOS Symmetry 0 = 40/60% max, 0 to 70°C 2 = 40/60% max, -40 to 85°C A = 45/55% max, 0 to 70°C, 70 MHz max C = 45/55% max, -40 to 85°C, 70 MHz max Frequency Range 3 = 0.5 to 6 MHz 6 = 6+ to 24 MHz 8 = 24+ to 106.25 MHz 3 - 40.0000 (T) Packing Method (T) = Tape & Reel for SMD versions, full reel increments only, 200pcs (full size) or 250pcs (half size) Blank = Bulk Frequency (MHz) 3.3V Supply Pin 1 Tri-State - NTH N/C - NCH 13.0 max .510 Pin 14 +3.3 VDC (4) Glass Insulators 7.75 max .305 Pin 8 Output Package 0 = Full Size, Thru-Hole 9 = Half Size, Thru-Hole K = Full Size, Gull Wing J = Half Size, Gull Wing N = Half Size, Gull Wing, Spanked Leads S = Full Size, True SMD Adaptor (see separate data sheet for dimensions) Stability Tolerance C = ±100ppm B = ±50ppm A = ±25ppm, 0 to +70°C only AA = ±20ppm, 0 to +70°C only Standard Marking Format** Includes Date Code, Frequency & Part Number Tri-State Logic Table (NTH only) Pin 1 Input Logic 1 or NC Logic 0 or GND Pin 8 (5) Output Oscillation High Impedance Required Input Levels on Pin 1: Logic 1 = 2.2V min Logic 0 = 0.8V max SARONIX XTAL OSC Denotes Pin 1 HALF SIZE PACKAGE 13.0 max .510 0.91 max .036 5.08 max .200 6.35±0.51 0.25±0.02 7.62±.20 .300±.008 Pin 4 GND Output: Output: Internal Pullup Resistance Control Input: Oscillation @ VIN, 2.2V min High Impedance @ VIN, 0.8V max 50KΩ min Disable Output Delay: 100ns max Test Circuit .46±.08 .018±.003 Pin 1 Tri-State - NTH N/C - NCH 1.5 .059 13.0 .510 max 120° mA M TEST POINT Pin 14 (8) V DD OUT CL = 50 pF, 0.5 to 50 MHz CL = 30 pF, 50+ to 70 MHz CL = 15pF, 70+ to 106.25 MHz (Note A) Pin 8 (5) 120° 120° 7.62±.20 .300±.008 POWER SUPPLY VM OSCILLATOR GND Pin 1 (1) * Pin 7 (4) Pin 8 +3.3 VDC 1.7 .067 6.0 .236 Pin 5 Output TRI-STATE INPUT (NTH only) Standard Marking Format** Includes Date Code, Frequency & Part Number NOTE A: CL includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package SARONIX Denotes Pin 1 All specifications are subject to change without notice. **Exact location of items may vary DS-159 REV D S aRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894 SaRonix True SMD Adaptor - 7.57mm High Technical Data REV A SaRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894