NRN13S104GTG

Resistor Networks SINGLE-IN-LINE “SIP” RESISTOR NETWORKS CONFORMAL COATED, LOW PROFILE LEADED FEATURES • CERMET THICK FILM CONSTRUCTION • LOW PROFILE 5mm (.200" BODY HEIGHT) • WIDE RANGE OF RESISTANCE VALUES • HIGH RELIABILITY AT ECONOMICAL PRICING • 4 PINS TO 13 PINS AVAILABLE • 6 CIRCUIT TYPES NRN Series CHARACTERISTICS Item Rated Power per Resistor at 70o C Operating Temperature Range Resistance Range Resistance Temperature Coefficient TC Tracking Max. Working Voltage Short Time Overload Load Life Mositure Load Life Temperature Cycle Soldering Heat Resistance Vibration Insulation Resistance Solderability Specifications Comm on/Bussed: Isolated: 125mW Series: Ladder: Voltage Divider: 75mW Terminator: -55 ~ +125 o C 10 Ω ~ 3 .3Meg Ω ( E24 Values) ±100 ppm/o C (10 Ω ~2Meg Ω ) ±200 ppm/o C (Values> 2Meg Ω ) ±50 ppm/o C 100 V or Rated Power x Resistance, whichever is less ±1% : JIS C-5202 5 5, 2.5 times max. working voltage for 5 seconds ±3% : JIS C-5202 7.10, 1000 hrs. at 70 o C with rated power applied, 1.5 hrs. on and 0.5 hr. off ±3% : JIS C-5202 7.9, 500 hrs. at 40 o C and 90 ~ 95% RH with rated power applied, 1.5 hrs. on and 0.5 hr. off ±1% : JIS C-5202 7.4, 5 Cycles of 30 minutes at -25o C, 15 minutes at +25 o C, 30 minutes at +70 o C and 15 minutes at +25 o C ±1% : JIS C-5202 6.4, 260±5 o C for 10±1 seconds, 3mm from the body ±1% : 12hrs. at max. 20Gs between 10 to 2kHz 10,000 mW min. at 100v Per MIL-R-83401 100 DERATING RATE (%) 80 60 40 20 0 0 40 70 POWER DERATING CURVE: For resistors operating in ambient temperatures above 70oC, power rating should be derated in accordance with the curve shown. 80 120 125 140 AMBIENT TEMPERATURE (oC) ® NIC COMPONENTS CORPORATION 70 Maxess Rd., Melville, NY 11747 • (631)396-7500 FAX (631)396-7575 Resistor Networks DIMENSIONS (mm) NRN Series ¦ MAX ¦ L Max. ¦ ¦ 5.08 max. ¦ 2.54 max. No. of PINS 4 5 6 7 8 9 10 11 12 13 L max 10.2 12.7 15.3 17.8 20.4 22.9 25.4 28.0 30.5 33.1 LEADED 1 2 3 4 5 6 7 ¦¦ ¦ 3.18 +.640 -.000 ¦ ¦ 0.25 ±0.1 0.50 ±0.1 ¦ ¦ ¦ 2.54 ¦ ±0.1 ¦ ¦ max. 1.2 STANDARD CIRCUITS Fig. 1: BUSSED/COMMON CIRCUIT Fig. 2: ISOLATED/INDEPENDENT CIRCUIT Fig. 3: SERIES CIRCUIT Fig. 4: LADDER CIRCUIT Fig. 5: VOLTAGE DIVIDER CIRCUIT Fig. 6: TERMINATION CIRCUIT R R R R R R R R R R R R R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 2R 2R 2R 2R 2R 2R R2 R2 R2 R2 R2 R2 PART NUMBERING SYSTEM NRN 10 C 104 G XX T.C. Option Tolerance Code: G = ±2%, J = ±5% Resistance in ohms first 2 digits are significant, third is no. of zeros, “R” indicates decimal under 10 ohms Circuit Type: C = Bussed/Common, I = Isolated S = Series, V = Voltage Divider, No. of PINS Terminator Code = See chart, Ladder Code = See chart Terminator Code TA TB TC TD R1/R2 160/240 180/390 220/270 220/330 330/390 330/470 330/680 1.5K/3.3K 3.0K/6.2K Special Series Part Marking Includes: 1.) Number of PINS. 2.) Circuit Type: "1" or "C" = Common/Bussed "2" or "I" = Isolated 3.) Resistance Value (in ohms). 4.) Resistance Tolerance: "G" = ±2% "J" = ±5% Ladder Code LA LB LC LD LS R/2R 10K/20K 25K/50K 50K/100K 100K/200K Special TE TF TG TH TI TS ® NIC COMPONENTS CORPORATION 70 Maxess Rd., Melville, NY 11747 • (631)396-7500 FAX (631)396-7575