OM1324SMM OM1324NMM OM1324NKM OM1324NTM
OM1324STM OM1324N2M
1.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703405
Three Terminal, Precision Adjustable Positive Voltage Regulator In Hermetic Style Packages (LM117A)
Please see mechanical outlines herein
FEATURES
• • • • • • Similar To Industry Standard LM117A Approved To DESC Standardized Military Drawing Number 7703405 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles Maximum Output Voltage Tolerance Is Guaranteed to + 1%
DESCRIPTION
These three terminal positive regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from 1.2 volts to 37 volts using external resistors.
ABSOLUTE MAXIMUM RATINGS Tc @ 25°C
Power Dissipation Case 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0°C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 37 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 41.25 VDC
4 11 R2 Supersedes 1 07 R1
3.5
3.5 - 17
OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM, OM1324N2M
ELECTRICAL CHARACTERISTICS
Parameter Reference Voltage Symbol VREF
-55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM
Test Conditions VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V Line Regulation (Note 1) Load Regulation (Note 1) RLOAD RLINE 3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C 3.3V ≤ VDIFF ≤ 40V, Vout = Vref VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 195mA Thermal Regulation VRTH Vin = 14.6V, IL = 1.5A Pd = 20 Watts, t = 20 ms, TA = 25°C Ripple Rejection (Note 2) Adjustment Pin Current IAdj RN f = 120 Hz, Vout = Vref CAdj = 10 µF VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V Adjustment Pin Current Change ∆IAdj VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 195mA 3.0V ≤ VDIFF ≤ 40V, TA = 25°C 3.3V ≤ VDIFF ≤ 40V Miminum Load Current ILmin VDIFF = 3.0V, VOUT = 1.4V (forced) VDIFF = 3.3V, VOUT = 1.4V (forced) VDIFF = 40V, VOUT = 1.4V (forced) Current Limit (Note 2) ICL VDIFF = 15V VDIFF = 40V, TA = 25°C 100 • Min. 1.238 Max. 1.262 1.270 1.270 4.5 9 15 15 15 15 5 mV mV mV V Unit
• •
1.225 1.225 -4.5 -9 -15
• •
-15 -15 -15 -5
•
66
dB
• •
-5
100 100 5 5 5 5 5 5 5.0
µA
• • • • • •
-5 -5 -5 -5 -5
µA
5.0 5.0 1.5 0.18 3.5 1.5
mA
A
Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The • denotes the specifications which apply over the full operating temperature range.
PART NUMBER DESIGNATOR
Standard Military Drawing Number Omnirel Part Number OM1324SMM OM1324STM OM1324NTM OM1324 NKM OM1324NMM OM1324N2M Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20
3.5
7703405M 7703405U 7703405T 7703405Y 7703405N 77034052
3.5 - 18
OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM, OM1324N2M
ELECTRICAL CHARACTERISTICS
OM1324N2M
Parameter Reference Voltage Symbol VREF
-55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified)
Min. 1.238 Max. 1.262 1.270 1.270 4.5 9 15 15 15 15 2 mV mV mV V Unit
Test Conditions VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V
• •
•
1.225 1.225 -4.5 -9 -15
Line Regulation (Note 1) Load Regulation (Note 1)
RLINE
3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C 3.3V ≤ VDIFF ≤ 40V, Vout = Vref
RLOAD
VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 100 mA
• •
-15 -15 -15 -2
Thermal Regulation
VRTH
Vin = 14.6V, IL = 300 mA Pd = 4.0 Watts, t = 20 ms, TA = 25°C
Ripple Rejection (Note 2) Adjustment Pin Current
RN
f = 120 Hz, Vout = Vref CAdj = 10 µF
•
66
dB
IAdj
VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V
100
• •
-5
100 100 5 5 5 5 5 5 5.0
µA
Adjustment Pin Current Change
∆IAdj
VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA VDIFF = 40V, 10mA ≤ IL ≤ 150mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 100mA 3.0V ≤ VDIFF ≤ 40V, TA = 25°C 3.3V ≤ VDIFF ≤ 40V
• • • • • •
-5 -5 -5 -5 -5
µA
Miminum Load Current
ILmin
VDIFF = 3.0V, VOUT = 1.4V (forced) VDIFF = 3.3V, VOUT = 1.4V (forced) VDIFF = 40V, VOUT = 1.4V (forced)
5.0 5.0 0.5 0.15 1.65 0.65
mA
Current Limit (Note 2)
ICL
VDIFF = 15V VDIFF = 40V, TA = 25°C
A
Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The • denotes the specifications which apply over the full operating temperature range.
APPLICATION
Vin Vout OM1324STM R1 240Ω IAdj Cin* 0.1 µF R2 Adjust
* Cin is required if regulator is located an appreciable distance from power supply filter. ** Co is not needed for stability, however it does improve transient response. R Vout = 1.25 V (1 + 2 )+ IAd j R2 R1 Since IAdj is controlled to less than 100 µA, the error associated with this term is negligible in most applications.
3.5
3.5 - 19
OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM, OM1324N2M
MECHANICAL OUTLINE
.425
.420 .410
.200 .190 .045 .035 .665 .645 .537 .527
1
.100 .200
3 2
.035 WIDE FLAT 3 PLCS.
.425
.150 .140
.350 MIN.
123
.430 .410
.020
± .020 .115 .160
.080
.038 MAX.
OM1324SMM
.750 .500 .005
Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Case - Isolated
.035 .025
.100 TYP.
.120 TYP.
OM1324STM Isolated
Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Isolated
OM1324NTM Non-Isolated
Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Output
.140 .015 .075 .157
.140
.140 .075
1
2
.030 MIN.
.415
3
.062
.375
OM1324NMM
Pin 1 - Adjust Pin 2 - Input Pin 3 - Output
1.53 REF. 0.875 MAX. 0.135 MAX. 0.450 0.250 0.312 MIN. SEATING PLANE 0.043 0.038 2 PLCS. 0.225 0.205 0.161 0.151 0.525 R. MAX.
.003
1.197 1.177 0.675 0.655 0.440 0.420
.065 .020 X45° REF.
(±.003)
.009 R. 20 PLCS. .040
4
.010
0.188 R. MAX.
.075 (±.010) TYP.
9
2 1
.025 TYP. .085
3 1 19
.160 SQ. REF.
13 18 14
.025 SQ. TYP.
.050 (±.005) TYP.
.050 TYP.
.040 X45° REF (3 PL)
OM1324N2M
3.5
OM1324NKM
Pin 1 - Adjust Pin 2 - Input Case - Output
Pin 1 VOUT(Sense) Pin 2 NC Pin 3 NC Pin 4 NC Pin 5 VIN Pin 6 NC Pin 7 NC Pin 8 NC Pin 9 NC Pin 10 ADJUST
Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20
NC NC NC NC NC NC NC NC NC VOUT
For additional information please see the mechanical outline section.