0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
PL-2303X

PL-2303X

  • 厂商:

    ETC1

  • 封装:

  • 描述:

    PL-2303X - USB to Serial Bridge Controller - List of Unclassifed Manufacturers

  • 数据手册
  • 价格&库存
PL-2303X 数据手册
PL-2303X-Edition Product Brochure V1.0 12/16/04 1 PL-2303X-Edition USB to Serial Bridge Controller OVERVIEW The PL-2303X is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303X provides a convenient solution for connecting an RS-232 like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-2303X highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. The PL-2303X is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode, the PL-2303X is perfect for bus powered operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS-232 like serial port side also allows the PL-2303X to connect directly to 5V, 3.3V, or 2.5V devices. PL-2303X Rev.C integrates embedded clock and OTP to save external crystal and EEPROM. Customers can design with effective BOM cost and compact PCB size. FEATURES Full compliance with the USB Specification v1.1 On chip USB 1.1 transceiver, 5V→3.3V regulator, and 12 MHz crystal oscillator Support RS-232 like serial interface - Full-duplex transmitter and receiver (TXD and RXD) - Six MODEM control pins (RTS, CTS, DTR, DSR, DCD, and RI) - Parity error, frame error, and serial break detection - Programmable baud rate from 75 bps to 6 Mbps Extensive flow control mechanism - Adjustable high/low watermark level - Automatic flow control with CTS/RTS/ XON/XOFF Configurable 256-byte outbound buffer and 256-byte inbound buffer or 128-byte outbound buffer and 384-byte inbound buffer Support remote wake-up from MODEM input signals Rev.A supports 2 GPIO pins Rev.C supports 4 GPIO pins Rev.C supports embedded clock and OTP Package type: SSOP28 / QFN32 BLOCK DIAGRAM 12MHz 5V 3.3V USB1.1 Interface PLL Regulator USB Transceiver USB SIE Power Management USB EndPoint Controller ROM Data Buffer 2-Wire Serial EEPROM I/F RS232 I/F Controller 2-Wire EEPROM RS-232 Like I/F Prolific Technology Inc. 7F, #48, Sec.3, Nan-Kang Rd., Taipei, Taiwan 115, ROC Tel: 886-2-2654-6363 Fax: 886-2-2654-6161 E-mail: sales@prolific.com.tw http://www.prolific.com.tw
PL-2303X 价格&库存

很抱歉,暂时无法提供与“PL-2303X”相匹配的价格&库存,您可以联系我们找货

免费人工找货