SF5012C

927.00 MHz SAW Filter • • • • Designed to Band Pass in 927.00 MHz Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Ultra Miniature Ceramic QCC8C SMD Package SF5012 Absolute Maximum Rating (Ta=25°C) Parameter Input Power Level DC Voltage VDC Between Any Two Pins Operating Temperature Range Storage Temperature Range Pin VDC Rating 10 12 -10 ~ +60 -40 ~ +85 Unit dBm V °C °C TA Tstg Electronic Characteristics Parameter Nominal Frequency (at 25°C) (Center frequency between 3dB point) Insertion Loss Attenuation 3dB Passband Passband Ripple (within ±1.0 MHz) Absolute Attenuation DC … 887.00 MHz 987.00 … 1127.0 MHz Frequency Aging Absolute Value during the First Year |fA| Sym fC Minimum NS Typical 927.00 3.5 ±3.5 1.0 Maximum NS 5.5 ±5.0 ±1.5 Unit MHz dB MHz dB IL BW 3 ∆α αrel 45 40 1.0 - 50 45 50//10 10 - dB dB ppm/yr MΩ Ω//pF DC Insulation Resistance Between any Two Pins Input / Output Impendance (nominal) NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. 2. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. For questions on technology, prices and delivery please contact our sales offices or e-mail sales@vanlong.com. 5. 6. 3. 7. Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.vanlong.com SF5012 © August 2003 by Vanlong Technology Co., Ltd. 927.00 MHz SAW Filter Package Dimensions (QCC8C) Electrical Connections Terminals 1 2 5 6 3,7 4,8 Connection Input Input Ground Output Output Groud To be Grounded Case Ground Package Dimensions Dimensions A B C D Nom (mm) 2.08 0.60 1.27 2.54 Dimensions E F G H Nom (mm) 1.20 1.35 5.00 5.00 Marking Test Circuit 1. F5012 - Part Code F 5012 927.0 YWW 2. Frequency (MHz) in 5 digits 3. Date Code: Y : Last digit of year WW : Week No. From 50Ω source To 50Ω load L = 10 nH Typical Frequency Response Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.vanlong.com SF5012 © August 2003 by Vanlong Technology Co., Ltd.