SFR16S

BCcomponents DATA SHEET SFR16S/25/25H 5033E/5043E/5053H Standard metal film resistors Product specification Supersedes data of 31st July 2000 File under BCcomponents, BC08 2001 Jan 17 BCcomponents Product specification Standard metal film resistors FEATURES DESCRIPTION SFR16S/25/25H 5033E/5043E/5053H type SFR16S; light-green for type SFR25 and red-brown for type SFR25H) which provides electrical, mechanical and climatic protection. The encapsulation is resistant to all cleaning solvents, in accordance with “MIL-STD-202E, method 215”, and “IEC 60068-2045”. • Low cost • Low noise • Small size (SFR16S). APPLICATIONS A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with a coloured lacquer (light-blue for • General purpose resistors. QUICK REFERENCE DATA DESCRIPTION Resistance range Resistance tolerance Temperature coefficient: R < 4.7 Ω 4.7 Ω ≤ R ≤ 100 kΩ 100 kΩ < R ≤ 1 MΩ R > 1 MΩ Absolute maximum dissipation at Tamb = 70 °C Thermal resistance, Rth Maximum permissible voltage Noise: R < 68 kΩ 68 kΩ ≤ R ≤ 100 kΩ 100 kΩ ≤ R ≤ 1 MΩ R > 1 MΩ Basic specifications Climatic category (IEC 60068) Stability, ∆R/R max., after: load: R ≤ 1 MΩ R > 1 MΩ climatic tests: R ≤ 1 MΩ R > 1 MΩ soldering short time overload max. 0.1 µV/V max. 0.5 µV/V max. 1.5 µV/V max. 1.5 µV/V max. 0.1 µV/V max. 0.1 µV/V max. 0.1 µV/V max. 1.5 µV/V IEC 60115-1 and 60115-2 55/155/56 max. 0.1 µV/V max. 0.1 µV/V max. 0.1 µV/V max. 1.5 µV/V VALUE SFR16S (5033E) 1 Ω to 3 MΩ SFR25 (5043E) SFR25H (5053H) 1 Ω to 10 MΩ and jumper (0 Ω) ±1%; ±5%; E24/E96 series ≤±250 × 10−6/K ≤±100 × 10−6/K ≤±250 × 10−6/K ≤±250 × 10−6/K 0.5 W 170 K/W 200 V ≤±100 × 10−6/K ≤±100 × 10−6/K ≤±100 × 10−6/K ≤±250 × 10−6/K 0.4 W 200 K/W 250 V ≤±100 × 10−6/K ≤±100 × 10−6/K ≤±100 × 10−6/K ≤±250 × 10−6/K 0.5 W 150 K/W 350 V ±1% + 0.05 Ω ±1% + 0.05 Ω ±1% + 0.05 Ω ±1% + 0.05 Ω ±0.25% + 0.05 Ω ±0.25% + 0.05 Ω ±1% + 0.05 Ω ±1% + 0.05 Ω ±1% + 0.05 Ω ±1% + 0.05 Ω ±0.25% + 0.05 Ω ±0.25% + 0.05 Ω ±1% + 0.05 Ω ±2% + 0.1 Ω ±1% + 0.05 Ω ±2% + 0.1 Ω ±0.25% + 0.05 Ω ±1% + 0.05 Ω 2001 Jan 17 2 BCcomponents Product specification Standard metal film resistors ORDERING INFORMATION Table 1 Ordering code indicating resistor type and packaging TYPE SFR25(1) (SFR55) SFR25 SFR25(1) (SFR55) SFR25 SFR25 jumper(2) SFR25 jumper(2) SFR25H SFR25H SFR25H SFR16S SFR16S SFR16S SFR16S SFR16S jumper(2) Notes 1. In North America, the SFR25 1% is also known as SFR55. 2. The jumper has a maximum resistance Rmax = 10 mΩ at 5 A. TOL. (%) 12NC 2306 181 8.... 2306 181 63... 2322 188 2.... 2322 181 43... 2306 181 90011 2322 181 90019 2306 186 8.... 2306 186 63... 2322 186 76... 2306 187 1.... 2306 187 23... 2306 187 3.... 2322 187 53... 2306 187 90013 SFR16S/25/25H 5033E/5043E/5053H NAFTA PART NUMBER 5043EDxxxxxF12AF5 5043EMxxxxxJ12AFX 5043EDxxxxxF5AAF5 2322 181 43xxx 5043EM0R000J12AFX 5043EM0R000J18AFX 5053HDxxxxxF12AF5 5053HMxxxxxJ12AFX 2322 186 76xxx 5033EDxxxxxF12AF5 5033EMxxxxxJ12AFX 2306 187 3.... 2322 187 53... 2306 187 90013 TAPING (mm) 52 52 52 52 52 52 52 52 52 52 52.5 52.5 52.5 52.5 SPQ (units) 5000; tape & reel 5000; tape & reel 5000; ammopack 5000; ammopack 5000; tape & reel 5000; ammopack 5000; tape & reel 5000; tape & reel 5000; ammopack 5000; tape & reel 5000; tape & reel 5000; ammopack 5000; ammopack 5000; tape & reel ±1 ±5 ±1 ±5 − − ±1 ±5 ±5 ±1 ±5 ±1 ±5 − 2001 Jan 17 3 BCcomponents Product specification Standard metal film resistors Composition of the clear text code (NAFTA P/N) SFR16S/25/25H 5033E/5043E/5053H Composition of the 12NC • The resistors have an ordering code starting with 50 • The subsequent digits indicate the resistor type, temperature coefficient, ohmic value, tolerance and packaging; see Table 1 • The ohmic value is represented by 5 digits; see Table 2 • For temperature coefficient and tolerance, see Table 3. Table 2 Examples of the ohmic value OHMIC VALUE 1Ω 10 Ω 100 Ω 1 kΩ 10 kΩ 100 kΩ 1 MΩ Table 3 5 DIGIT VALUE 1R000 10R00 100R0 1K000 10K00 100K0 1M000 • The resistors have a 12-digit ordering code starting with 23 • The subsequent 7 digits indicate the resistor type and packaging; see Table 1. • The remaining digits indicate the resistance value: – The first 2 or 3 digits indicate the resistance value. – The last digit indicates the resistance decade in accordance with Tables 4 or 5. Table 4 Last digit for ±5% tolerance LAST DIGIT 7 8 9 1 2 3 4 5 6 0.10 to 0.91 Ω 1 to 9.1 Ω 10 to 91 Ω 100 to 910 Ω 1 to 9.1 kΩ 10 to 91 kΩ 100 to 910 kΩ 1 to 9.1 MΩ RESISTANCE DECADE Letter coding for temperature coefficient and tolerance LETTER CODE M D TOL. (%) LETTER CODE J F ≥10 MΩ Table 5 Last digit for ±1% tolerance TC (×10−6/K) 200 100 ±5 ±1 RESISTANCE DECADE 0.10 to 0.976 Ω 1 to 9.76 Ω 10 to 97.6 Ω 100 to 976 Ω 1 to 9.76 kΩ 10 to 97.6 kΩ 100 to 976 kΩ 1 to 9.76 MΩ LAST DIGIT 7 8 9 1 2 3 4 5 6 ORDERING EXAMPLE: CLEAR TEXT CODE The ordering code of a SFR25 resistor, value 5600 Ω ±1%, taped on a bandolier of 5000 units in tape on reel is: 5043ED5K600F12AF5. ≥10 MΩ ORDERING EXAMPLE: 12NC The ordering code of a SFR25 resistor, value 5600 Ω ±5%, taped on a bandolier of 5000 units in ammopack is: 2322 181 43562. 2001 Jan 17 4 BCcomponents Product specification Standard metal film resistors FUNCTIONAL DESCRIPTION Product characterization SFR16S/25/25H 5033E/5043E/5053H Standard values of nominal resistance are taken from the E24/E96 series for resistors with a tolerance of ±5%; ±1%. The values of the E24/E96 series are in accordance with “IEC publication 60063”. 0.5 P (W) 0.4 T amb = 40 o C 70 o C 0.3 100 o C 0.2 125 C o 0.1 155 o C Tm ( oC) 10 0 00 h 22 10 10 h 00 1k Ω kΩ 0k Ω 10 0k Ω 1.5 2.0 1.0 1.5 0.7 1.0 0.5 0.7 0.3 0.5 0.2 0.3 0.1 % 0.2 % ∆ R / R for R ∆ R / R for R 100 kΩ 100 kΩ MEA595 SFR16S 5033E Fig.1 Drift nomogram. 2001 Jan 17 5 BCcomponents Product specification Standard metal film resistors SFR16S/25/25H 5033E/5043E/5053H 100 P (%) 75 T amb = 40 o C 70 o C 100 C o 50 125 o C 25 155 o C Tm ( o C) 1k Ω 0k Ω 10 10 00 0h 00 h 1M 1M Ω 10 Ω 2.0 3.0 1.5 2.0 1.0 0.7 1.0 0.5 0.7 0.3 0.5 0.2 % 0.3 % ∆ R / R for R ∆ R / R for R 1 MΩ 1 MΩ MLB651 SFR25(H) Pn = 0.4 W (5043E) or 0.5 W (5053H). Fig.2 Drift nomogram. 2001 Jan 17 6 BCcomponents Product specification Standard metal film resistors Limiting values TYPE SFR16S/5033E SFR25/5043E SFR25H/5053H Note LIMITING VOLTAGE(1) (V) 200 250 350 SFR16S/25/25H 5033E/5043E/5053H LIMITING POWER (W) 0.5 0.4 0.5 1. The maximum voltage that may be continuously applied to the resistor element, see “IEC publication 60115-1”. The maximum permissible hot-spot temperature is 155 °C. DERATING The power that the resistor can dissipate depends on the operating temperature; see Fig.3. 100 Pmax (%Prated ) 75 MLB650 50 25 R 1 MΩ 0 40 60 70 80 100 120 140 o Tamb ( C) 155 Fig.3 Maximum dissipation (Pmax) in percentage of rated power as a function of the ambient temperature (Tamb). 2001 Jan 17 7 BCcomponents Product specification Standard metal film resistors PULSE LOADING CAPABILITIES SFR16S/25/25H 5033E/5043E/5053H 10 3 P max (W) 10 2 t p /t i = 1000 500 200 100 50 20 10 5 1 2 MEA685 - 1 10 10 –1 10 –6 SFR16S 5033E 10 –5 10 –4 10 –3 10 –2 10 –1 t i (s) 1 Fig.4 ˆ Pulse on a regular basis; maximum permissible peak pulse power ( Pmax) as a function of pulse duration (ti). MEA689 600 Vmax (V) 500 400 300 200 100 0 10 6 SFR16S 5033E 10 5 10 4 10 3 10 2 10 1 t i (s) 1 Fig.5 ˆ Pulse on a regular basis; maximum permissible peak pulse voltage ( Vmax) as a function of pulse duration (ti). 8 2001 Jan 17 BCcomponents Product specification Standard metal film resistors SFR16S/25/25H 5033E/5043E/5053H 10 3 Pmax (W) 10 2 t p /t i = 1000 500 200 100 50 20 10 5 1 2 MLB389 10 10 1 10 6 SFR25 5043E 10 5 10 4 10 3 10 2 10 1 t i (s) 1 Fig.6 ˆ Pulse on a regular basis; maximum permissible peak pulse power ( Pmax) as a function of pulse duration (ti). 600 V max (V) 500 MEA678 400 300 200 100 0 10 6 SFR25 5043E 10 5 10 4 10 3 10 2 10 1 t i (s) 1 Fig.7 ˆ Pulse on a regular basis; maximum permissible peak pulse voltage ( Vmax) as a function of pulse duration (ti). 9 2001 Jan 17 BCcomponents Product specification Standard metal film resistors SFR16S/25/25H 5033E/5043E/5053H 10 3 Pmax (W) 10 2 t p /t i = 1000 500 200 100 50 10 20 10 5 1 2 MLB653 10 1 10 6 SFR25H 5053H 10 5 10 4 10 3 10 2 10 1 t i (s) 1 Fig.8 ˆ Pulse on a regular basis; maximum permissible peak pulse power ( Pmax) as a function of pulse duration (ti). MLB654 1200 Vmax (V) 800 400 0 10 6 SFR25H 5053H 10 5 10 4 10 3 10 2 10 1 t i (s) 1 Fig.9 ˆ Pulse on a regular basis; maximum permissible peak pulse voltage ( Vmax) as a function of pulse duration (ti). 10 2001 Jan 17 BCcomponents Product specification Standard metal film resistors Application information SFR16S/25/25H 5033E/5043E/5053H MEA591 60 ∆T (K) 40 MEA592 2 5 10 15 mm 100 ∆T (K) 50 20 0 0 0.2 0.4 0.6 P (W) 0.8 0 0 0.2 0.4 0.6 P (W) 0.8 SFR16S 5033E SFR16S 5033E Fig.10 Hot-spot temperature rise (∆T) as a function of dissipated power. Fig.11 Temperature rise (∆T) at the end of the lead (soldering point) as a function of dissipated power at various lead lengths after mounting. MLB652 MLB388 100 ∆T (K) 80 SFR25 ∆T (K) 40 5 mm 30 10 15 SFR25H 20 60 40 10 20 0 0 0.1 0.2 0.3 0.4 P (W) 0.5 0 0 0.1 0.2 0.3 0.4 P (W) 0.5 SFR25/SFR25H 5043E/5053H SFR25 5043E Fig.12 Hot-spot temperature rise (∆T) as a function of dissipated power. Fig.13 Temperature rise (∆T) at the end of the lead (soldering point) as a function of dissipated power at various lead lengths after mounting. 2001 Jan 17 11 BCcomponents Product specification Standard metal film resistors SFR16S/25/25H 5033E/5043E/5053H MECHANICAL DATA 50 ∆T (K) 40 5 mm 10 mm 15 mm MEA687 Mass per 100 units TYPE SFR16S/5033E SFR25/5043E Marking The nominal resistance and tolerance are marked on the resistor using four or five coloured bands in accordance with IEC publication 60062 “Colour codes for fixed resistors”. Outlines MASS (g) 12.5 25 30 20 10 0 0 0.2 0.4 P (W) 0.6 The length of the body (L1) is measured by inserting the leads into holes of two identical gauge plates and moving these plates parallel to each other until the resistor body is clamped without deformation (“IEC publication 60294”). SFR25H 5053H Fig.14 Temperature rise (∆T) at the end of the lead (soldering point) as a function of dissipated power at various lead lengths after mounting. L1 ∅d CCB414 ∅D L2 For dimensions see Table 6. Fig.15 Outline. Table 6 Resistor type and relevant physical dimensions; see Fig.15 TYPE SFR16S/5033E SFR25/5043E SFR25H/5053H ∅D MAX. (mm) 1.9 2.5 2.5 L1 MAX. (mm) 3.2 6.5 6.5 L2 MAX. (mm) 3.4 7.0 7.0 ∅d (mm) 0.45 ±0.05 0.58 ±0.05 0.58 ±0.05 2001 Jan 17 12 TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the schedule of “IEC publication 60115-1”, category 55/155/56 (rated temperature range −55 °C to +155 °C; damp heat, long term, 56 days). The testing also covers the requirements specified by EIA and EIAJ. The tests are carried out in accordance with IEC publication 60068-2, “Recommended basic climatic and mechanical robustness testing procedure for electronic components” and under standard atmospheric conditions according to “IEC 60068-1”, subclause 5.3. Table 7 Test procedures and requirements IEC 60068-2 TEST METHOD 21 (U) 21 (Ua1) 21 (Ub) In Table 7 the tests and requirements are listed with reference to the relevant clauses of “IEC publications 60115-1 and 60068-2” ; a short description of the test procedure is also given. In some instances deviations from the IEC recommendations were necessary for our method of specifying. 2001 Jan 17 13 BCcomponents Standard metal film resistors IEC 60115-1 CLAUSE 4.16 4.16.2 4.16.3 REQUIREMENTS TEST PROCEDURE RESISTANCE RANGE SFR16S (5033E) SFR25 (5043E) SFR25H (5053H) robustness of terminations: tensile all samples ∅0.45 mm, load 5 N; 10 s number of failures 1 MΩ R < 4.7 Ω R ≤ 100 kΩ R ≤ 1 MΩ R > 1 MΩ ∆R/R max.: ±1% + 0.05 Ω ∆R/R max.: ±1% + 0.05 Ω ∆R/R max.: ±2% + 0.1 Ω 4.24.2 4.25.1 3 (Ca) Rins min.: 1000 MΩ ∆R/R max.: ±1% + 0.05 Ω ∆R/R max.: ±1% + 0.05 Ω ∆R/R max.: ±1% + 0.05 Ω ≤±250 ≤±100 ≤±250 ≤±250 ≤ ±100 ≤ ±100 ≤ ±100 ≤ ±250 no breakdown ∆R/R max.: ±2% + 0.1 Ω ≤±100 ≤±100 ≤±100 ≤±250 4.8.4 temperature coefficient 4.7 voltage proof on insulation 400 V (RMS) (SFR16S) or 600 V (RMS) (SFR25 and SFR25H); during 1 minute; V-block method “IEC publication 60195” R < 68 kΩ R ≤ 100 kΩ R ≤ 1 MΩ R > 1 MΩ max. 0.1 µV/V max. 0.5 µV/V max. 1.5 µV/V max. 1.5 µV/V SFR16S/25/25H 5033E/5043E/5053H 4.12 noise max. 0.1 µV/V max. 0.1 µV/V max. 0.1 µV/V max. 1.5 µV/V Rins min.: 1000 MΩ max. 0.1 µV/V max. 0.1 µV/V max. 0.1 µV/V max. 1.5 µV/V Product specification 4.6.1.1 insulation resistance 500 V (DC) during 1 minute; V-block method 2001 Jan 17 15 BCcomponents IEC 60115-1 CLAUSE 4.13 IEC 60068-2 TEST METHOD REQUIREMENTS TEST PROCEDURE room temperature; P = 6.25 × Pn (SFR25) or 6.25 × 0.25 W (SFR16S); 5 s on, 45 s off (V ≤ 2 × Vmax); 10 cycles 16 × 0.16 W; 1 s on and 25 s off; 10000 ±200 cycles; Vmax = 600 V RESISTANCE RANGE SFR16S (5033E) SFR25 (5043E) SFR25H (5053H) Standard metal film resistors short time overload ∆R/R max.: ±0.25% + 0.05 Ω ∆R/R max.: ±1% + 0.05 Ω intermittent overload in accordance with “JIS-C5202 5.8” see 2nd amendment to “IEC 60115-1”, Jan. ’87 pulse load ∆R/R max.: ±0.75% + 0.05 Ω − − see Figs 4, 5, 6, 7, 8 and 9 SFR16S/25/25H 5033E/5043E/5053H Product specification