TCD60E1E336M

TCD Series MULTIL AYER CERAMIC Y5U Ceramic Radial Lead High CV 125 C Maximum Temperature Actual Size TCD The TCD series are radial lead ceramic capacitors from UCC/NCC. These capacitors have a very low ESR and impedance which makes these capacitors ideal for filtering switching power supplies and DC-DC converters. The TCD series has a maximum 250VDC rated voltage making them more applicable for use in higher voltage power supplies than our ceramic chip capacitors. All of our radial capacitors with 5mm lead spacing are also available with ammo pack taping. Refer to Mini-Glossary at the end of the multilayer ceramic capacitors section for additional technical information and specifications. Summary of Specifications Radial lead terminals. Capacitance range: 0.1 to 100µF. Voltage range: 25 to 250VDC. Operating temperature range: 55 C to 125 C. Standard capacitance tolerance: 20% or 20% to 80% Nominal case size (L W H ): 5.0 3.5 6.0mm to 28.5 8.5 Rated lifetime: 1,000 hours at 125 C. 20.0mm. 18 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com TCD Series TCD Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Dissipation Factor ( Tan ) Ripple Current Withstand Voltage Insulation Resistance Solderability 55 to 125 C 25 to 250VDC 0.1 to 100 F 20% ( M ) or 20% to 20 80% ( Z ) at 20 2 C, 1 0.1kHz, and 1 0.2Vrms Characteristics 2.5% maximum at 2 C, 1 0.1kHz, and 1 0.2Vrms At 125 C, the maximum ripple current at 10kHz -1MHz is specified in the Ratings Tables. MULTIL AYER CERAMIC No abnormality after applying 250% of the DC rated voltage from terminal-to-terminal and terminal-to-resin coating for 1 to 5 seconds at 20 2 C. 1,000 Ω•F or 10,000MΩ, whichever is less, after applying the DC rated voltage for 60 5 seconds at 20 2 C. Using H60A or H63A solder at a solder temperature of 235 5 C and a dip time of 2 0.5 seconds, a minimum of 75% of the circumferential surface of the dipped lead wires shall be covered with new solder. Using H60A or H63A solder at a solder temperature of 350 10 C and a dip time of 3 0.5 seconds at a depth of 2 to 2.5mm from the resin coating, the following specifications shall be satisfied when the capacitors are restored to 20 C. Appearance : no abnormality Capacitance change : ≤ 15% of initial measured value Tan ( DF ) : ≤ 2.5% TCD Soldering Heat Resistance Humidity Load Life Test The following specifications shall be satisfied when the capacitors are restored to 20 C after applying the DC rated voltage for 500 24, 0 hours at 40 2 C, 90 - 95% RH. After the initial load test, the withstand voltage shall be tested by applying 250% of the DC rated voltage for 5 seconds. Appearance : no abnormality Capacitance change : ≤ 20% of initial measured value Tan ( DF ) : ≤ 5% Insulation resistance : 50 Ω•F or 1,000MΩ, whichever is less Load Life Test The following specifications shall be satisfied when the capacitors are restored to 20 C after applying 200% of the DC rated voltage for 1,000 48, 0 hours at 85 2 C, or 1,000 48, 0 hours at 125 3 C with the initial DC rated voltage applied. After the initial load test, the withstand voltage shall be tested by applying 250% of the DC rated voltage for 5 seconds. Appearance : no abnormality Capacitance change : ≤ 20% of initial measured value Tan ( DF ) : ≤ 5% Insulation resistance : 100 Ω•F or 1,000MΩ, whichever is less Part Numbering System for TCD Series TCD 31 E 1H 225 M T When ordering, always specify complete catalog number for TCD Series. Taping Code: T = Straight Lead; T710 = Crimped Lead. Optional taping is available for case codes 21, 30, 31 and 41 only. Capacitance Tolerance: M = 20%; Z = 20% to 80% Capacitance Value: Expressed in picofarads. The first two digits are significant figures, and the third digit indicates the number of zeros following these figures (e.g. 225 = 2,200,000pF = 2.2 F ). Voltage Code: 1E = 25VDC; 1H = 50VDC; 2A = 100VDC; 2E = 250VDC. Temperature Coefficient: E = Y5U. Case Code: Refer to dimensions section for standard case sizes. Series Name: Indicates basic capacitor design. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 19 TCD Series Construction and Diagram of Dimensions Radial Lead Multilayer Ceramic Resin Coating Ceramic Dielectric Termination Unit: mm L W Solder H MULTIL AYER CERAMIC Internal Electrode Lead Wire P 15 Min. TCD Case Dimensions UCC Case Code 21 30 31 41 51 60 61 L max. 5.0 6.3 7.5 10.0 13.5 22.5 28.5 W max. 3.5 4.0 4.0 5.0 5.5 8.5 8.5 H max. 4.5 5.0 7.5 10.0 13.5 17.5 17.5 P max. 1.5 1.5 1.5 1.5 1.5 2.5 2.5 F 0.8 5.0 5.0 5.0 5.0 10.0 20.0 25.0 Ød 0.05 0.5 0.5 0.5 0.5 0.6 0.8 0.8 F d Standard Voltage Ratings - Radial Lead Multilayer Ceramic Rated Voltage (WVDC) Capacitance (µF ) Catalog † Part Number † UCC Case Code* Maximum Ripple Current (A rms) at 125 C, 10kHz-1MHz 0.3 0.3 0.8 0.8 1.0 1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 0.11 0.16 0.24 0.3 0.3 0.75 0.8 1.0 1.0 1.0 1.5 1.5 2.0 2.0 3.0 25 Volts 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 TCD21E1E684M TCD21E1E105M TCD30E1E155M TCD30E1E225M TCD31E1E335M TCD31E1E475M TCD41E1E685M TCD41E1E106M TCD51E1E156M TCD51E1E226M TCD60E1E336M TCD60E1E476M TCD61E1E686M TCD61E1E107M TCD21E1H104M TCD21E1H154M TCD21E1H224M TCD21E1H334M TCD21E1H474M TCD30E1H684M TCD30E1H105M TCD31E1H155M TCD31E1H225M TCD31E1H335M TCD41E1H475M TCD41E1H685M TCD51E1H106M TCD51E1H156M TCD60E1H226M 20%, 80% tolerance. 21 21 30 30 31 31 41 41 51 51 60 60 61 61 21 21 21 21 21 30 30 31 31 31 41 41 51 51 60 50 Volts † M indicates 20% tolerance. Substitute code letter Z in part number for * Refer to diagram of dimensions for actual case sizes. 20 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com TCD Series Standard Voltage Ratings - Radial Lead Multilayer Ceramic Rated Voltage (WVDC) Capacitance (µF ) Catalog † Part Number † UCC Case Code* Maximum Ripple Current (A rms) at 125 C, 10kHz-1MHz 3.0 4.0 4.0 0.22 0.3 0.3 0.73 0.8 1.0 1.0 1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 0.55 0.8 1.0 1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 50 Volts 33 47 68 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 TCD60E1H336M TCD61E1H476M TCD61E1H686M TCD21E2A104M TCD21E2A154M TCD21E2A224M TCD30E2A334M TCD30E2A474M TCD31E2A684M TCD31E2A105M TCD31E2A155M TCD41E2A225M TCD41E2A335M TCD51E2A475M TCD51E2A685M TCD60E2A106M TCD60E2A156M TCD61E2A226M TCD61E2A336M TCD30E2E104M TCD30E2E154M TCD31E2E224M TCD31E2E334M TCD41E2E474M TCD41E2E684M TCD51E2E105M TCD51E2E155M TCD60E2E225M TCD60E2E335M TCD61E2E475M TCD61E2E685M 20%, 80% tolerance. 60 61 61 21 21 21 30 30 31 31 31 41 41 51 51 60 60 61 61 30 30 31 31 41 41 51 51 60 60 61 61 MULTIL AYER CERAMIC TCD 100 Volts 250 Volts † M indicates 20% tolerance. Substitute code letter Z in part number for * Refer to diagram of dimensions for actual case sizes. Ammo Pack Taping Specifications Radial Lead Multilayer Ceramics Available for Case Codes 21, 30, 31 and 41 Conforms to JIS-C-0805 Ammo Pack h P0 / 2 P Unit: mm Dimensions and Quantity Per Box UCC Case Code H max. Straight Lead H max. Crimped Lead H 0 0.5 P 1.0 P 0 0.3 P1 0.7 P 0 /2 1.3 F 1.0 W 0.5, 1.0 W/2 0.5 M 1.0 M 0 1.5 Ø D 0.2 Ø d 0.05 t 0.2 ∆h 2 Pieces Per Box * 21 23 25 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 2,000 30 24 26 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 2,000 31 26 28 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 2,000 41 29 30 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 1,500 H (straight) H (crimped) M0 H0 W/ 2 M W P1 P0 F Ød ØD t *Specified quantity may vary for rating of capacitor. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 21 TCD Series Capacitance and DF Variation with Temperature and Applied DC Voltage TCD 25V, 10µF Cap Bias 0V Cap Bias 12V Cap Bias 25V TCD 100V, 1µF Cap Bias 0V Cap Bias 50V Cap Bias 100V DF Bias 0V DF Bias 0V Capacitance Change (%) 20 0 20 40 Capacitance Change (%) 20 10 0 140 40 40 20 0 20 40 MULTIL AYER CERAMIC DF (%) TCD 80 100 60 80 100 60 10 0 140 40 20 0 20 40 60 80 100 120 40 20 0 20 40 60 80 100 120 Temperature ( C) Temperature ( C) TCD 50V, 1.5µF Cap Bias 0V Cap Bias 25V Cap Bias 50V TCD 250V, 1.5µF Cap Bias 0V Cap Bias 125V Cap Bias 250V DF Bias 0V DF Bias 0V Capacitance Change (%) 20 0 20 40 Capacitance Change (%) 40 40 20 0 20 40 DF (%) 80 100 60 10 0 140 80 100 60 10 0 140 40 20 0 20 40 60 80 100 120 40 20 0 20 40 60 80 100 120 Temperature ( C) Temperature ( C) 22 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com DF (%) 60 20 60 20 DF (%) 60 60 20 TCD Series Impedance/ESR – Frequency Characteristics Z TCD41E1H685M ESR Z TCD61E1H685M ESR Impedance / ESR (ohms) 10 Impedance / ESR (ohms) 100 100 10 1 1 MULTIL AYER CERAMIC 0.1 0.1 TCD 0.01 0.01 0.001 100 1k 10k 100k 1M 10M 0.001 100 1k 10k 100k 1M 10M Frequency (Hz) Z TCD41E2A335M ESR Frequency (Hz) Z TCD61E2A336M ESR Impedance / ESR (ohms) 10 Impedance / ESR (ohms) 100 100 10 1 1 0.1 0.1 0.01 0.01 0.001 100 1k 10k 100k 1M 10M 0.001 100 1k 10k 100k 1M 10M Frequency (Hz) Z TCD41E2E684M ESR Frequency (Hz) Z TCD61E2E685M ESR Impedance / ESR (ohms) 10 Impedance / ESR (ohms) 100 100 10 1 1 0.1 0.1 0.01 0.01 0.001 100 1k 10k 100k 1M 10M 0.001 100 1k 10k 100k 1M 10M Frequency (Hz) Frequency (Hz) United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 23