TMC-4F30

T MC-4F30-xxx VCSEL TO-46 metal can for gener al pur pose FEATURES: • Industry standard TO-46 package with flat window glass. • Low dependence of power output over temperature. • Symmetrical beam. • Packaged with a photodiode. • Cost-effective laser light source. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL MIN TYP MAX UNIT TEST CONDITIONS(1) Threshold Current Output Power Operating Current Slope Efficiency Wavelength Forward Voltage Breakdown voltage Series Resistance Monitor Current Beam Divergence Ith Po IOP η λP VF VBD RS IM θ 1 5 2 12 10 4 mA mW mA 820 2.0 10 1 0.20 850 2.2 15 40 2 8 870 2.5 mW/mA nm V V Ω uA degree IF =15 mA(2) Adjustable to establish 1.5 mW output power IF=15 mA(3) IF=15 mA IF=15 mA IR=10 µA IF =15 mA VR=5 V, Po = 1.5 mW IF=15 mA(4) Notes: 1. All parameters except mentioned are measured at IF=15 mA, 25°C, CW. 2. Higher power can be provided under request. 3. Slope efficiency is defined as ∆P/(15-Ith) at 25°C. 4. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). THERMAL CHARACTERISTICS: PARAMETERS SYMBOL MIN TYP MAX UNIT TEST CONDITIONS Thermal Resistance Ith Temperature Variation VF Temperature Coefficient £bTemperature Coefficient £f Temperature Coefficient P Rth ∆Ith ∆VF/∆T ∆η/∆T ∆λP /∆T 900 -1.5 -3.0 -0.20 0.06 1.5 °C /W mA mV/°C %/°C nm/°C TA=25°C TA=0~70°C TA=0~70°C, IF=15 mA TA=0~70°C, IF=15 mA TA=0~70°C, IF=15 mA ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX UNIT CONDITIONS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage -40 -20 125 85 260 40 10 ¢J ¢J ¢J mA V 5 seconds T MC-4F30 Fig. 1 Typical Optical Characteristics Typical Output Power vs Current 4 4 Fig. 2 Typical Electrical Characteristics Typical Voltage vs Current Out put Po wer (m W) 3 3 Volt age (V) 2 2 1 1 Ith 0 0 5 10 15 20 0 0 5 10 15 20 Current (mA) Current (mA) Fig. 3 Spectrum When Driving Current 15 mA Fig. 4 Temperature Dependence of Threshold Current Typical Threshold Current vs Ambient Temperature 10 9 Threshold Cu rrent (m A) 8 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 o 80 100 Ambient Temperature ( C) 3 transverse modes typically. WARNING: The VCSEL is a class IIIb laser in the safety standard ANSI Z136.1 and should be treated as a potential eye hazard. TMC-4F30 OUTLINE DIMENSIONS: • Unit: mm • PINOUT: TMC-4F30-801 TMC-4F30-802 T MC-4F30-803 Pin 1: VCSEL Anode Pin 2: VCSEL Cathode PD Anode Case Pin 3: PD Cathode Pin 1: VCSEL Cathode Pin 2: VCSEL Anode PD Cathode Case Pin 3: PD Anode Pin 1: VCSEL Anode Pin 2: VCSEL Cathode PD Cathode Case Pin 3: PD Anode TrueLight reserves the right to make changes due to the improvement of process and package technology. 3