TS4148-1206-R7T4

TSC 0.3 AMPS High Speed Switching Diode Voltage Range 100 Volts Current 0.3 Ampere TS4148 Features For surface mounted application Low forward voltage drop High current capability Fast switching for high efficiency High surge current capability Chip version in 1206 and 0805 High temperature soldering: 250°C / 10 seconds at terminals Item L W T C 1206 3.20 + 0.20 (0.127 + 0.008) 1.50 + 0.20 (0.062 + 0.008) .085 + 0.10 (0.034 + 0.004) 0.55 + 0.20 (0.022 + 0.008) 0805 2.00 + 0.20 (0.080 + 0.008) 1.25 + 0.20 (0.050 + 0.008) .085 + 0.10 (0.034 + 0.004) 0.45 + 0.20 (0.018 + 0.008) Mechanical Data Case: 1206 or 0805 Terminals: Tin plated Polarity: Indicated by cathode arrow Packaging: 8 mm tape per EIA STD RS-481 Dimensions in millimeters and (inches) Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Type Number Maximum Repetitive Peak Reverse Voltage Reverse Voltage Forward Current Maximum Average Forward Rectified Current Resistive Load f > 50Hz Peak Forward Surge Current, Half Sine-wave 8.3 ms 1µS Symbol TS4148 100 75 300 150 500 2.0 1.0 25.0 50.0 4.0 4.0 75 500 -65 to +200 -65 to +200 Units V V mA mA mA A V nA µA ns pF °C/W mW °C °C Rev.1 06/2003 VRRM VR IF IF(AV) IFSM VF IR trr CJ Maximum Instantaneous Forward Voltage @ 10mA TJ=25°C, VR=20V Maximum Instantaneous Reverse Current at Rated DC Blocking Voltage TJ=125°C, VR=20V Reverse Recovery Time ( Note 1) Typical Junction Capacitance ( Note 2) Typical Thermal Resistance Junction to Ambient Power Dissipation Operating Temperature Range Storage Temperature Range RTHJ-A PD TJ TSTG Notes: 1. Reverse Recovery Test Condition: IF = 10mA, VR = 6V, RL = 100 Ohm 2. Measured at 1 MHz and applied VR = 4.0V TSC Device Marking Device has been marked indelibly and legibly As follow Packing Package Name TS4148 - 1206 - R7T4 Type - Size - Packing R7 7" (180mm) Reel 5,000 pcs/reel R13 13" (330mm) Reel 15,000 pcs/reel T4 4mm Pitch Paper Tape Packing Rev. 1 06/2003 TSC Tape Specification Item Punch hole width 1206 0805 Punch hole length 1206 0805 Sprocket hole Sprocket hole position Punch hole position Sprocket hole pitch Punch hole pitch Punch hole center Base tape width Top/Bottom seal tape width Base tape thickness Top seal tape thickness Bottom seal tape thickness Symbol A B D E F P0 P1 P2 W0 W1 T0 T1 T2 Dimension 2.00+ 0.10 (0.080+ 0.004) 1.65+ 0.10 (0.066+ 0.004) 3.60+ 0.10 (0.144+ 0.004) 2.40+ 0.10 (0.096+ 0.004) 1.50+ 0.05 (0.060+ 0.002) 1.75+ 0.10 (0.070+ 0.004) 3.50+ 0.05 (0.140+ 0.002) 4.00+ 0.10 (0.160+ 0.004) 4.00+ 0.10 (0.160+ 0.004) 2.00+ 0.05 (0.080+ 0.002) 8.00+ 0.20 (0.320+ 0.008) 5.25+ 0.05 (0.210+ 0.002) 0.95+ 0.02 (0.038+0.0008) 0.054+ 0.005 (0.002+ 0.0002) 0.042+ 0.005 (0.0016+ 0.0002) Rev. 1 06/2003