X212

X200 SERIES (CMOS) STANDARD SPECIFICATIONS ( Similar to M55310/18 ) 05/00 FREQUENCY RANGE FREQUENCY ACCURACY @ + 25 C FREQUECY STABILITY Vs. TEMPERATURE OPERATING TEMPERATURE RANGE INPUT VOLTAGE ( See note below ) INPUT CURRENT o 1.5 Hz to 12 MHz + 0.0015% ( + 15 PPM ) See Options Below See Options Below + 5 VDC to + 15 VDC + 10% 5 mA Max. @ + 5 VDC 25 mA Max. @ + 15 VDC CMOS 200 KΩ in parallel with 50 pf 60/40% @ 50% Output Level 150 nS Max. @ + 5 VDC 0.105” 0.095” Pin 1 is identified with a Sq. Corner 0.254” 0.507” Max. Max. 1 0.200” Max. 0.250” 0.200” 0.020” 0.016” 0.439” Max. 7 OUTPUT LOAD SYMMETRY RISE & FALL TIMES ( 10% to 90% Output Level ) START-UP TIME < 10 MHz > 10 MHz FREQUENCY STABILITY Vs. VOLTAGE 14 8 0.305” 0.155” 0.295” 0.145” 0.305” 0.295” 0.605” 0.595” 0.877” Max. 50 nS Max. @ + 15 VDC Pin Connections 14 7 8 All Others B+ GND OUTPUT N/C 20 mS Max. 15 mS Max. + 0.0005% ( + 5 PPM ) Max. ( for 10% change in Voltage ) AGING @ +25 C PACKAGE, SEAL & LEAD FINISH o + 0.0005% ( + 5 PPM ) / year Max. Conforms with the Requirements of MIL-PRF-55310 Note: Input Voltage must be specified for 200 Series CMOS parts, minimum input voltage required depends upon output frequency and operating temperature range. Consult factory for your specific application. Contact Xsis Engineering for special requirements such as, Output Symmetry, Start-up Time, Frequency Accuracy, Complementary Outputs, Multiple Outputs, etc. ORDERING INFORMATION ( Select from options below ) : X 2 FREQUENCY Add Suffix “883B” for Mil-Screened Option Frequency Stability 1= 2= 3= 4= 5= + 0.1% + 0.05% + 0.01% + 0.005% + 0.002% Operating Temperature Range * * Option 5 not available for - 55 oC to +125 oC 1= 0 C to + 70 C o o 2 = - 30 C to + 85 C o o 3 = - 55 C to +125 C o o EXAMPLE: X243 - 883B - 4.000 MHz = 14 Pin Package with “X” Pinout, CMOS, + 0.005% over o o -55 C to +125 C, Mil-Screened , and 20.000 MHz Xsis Electronics, Inc. 12620 W. 63rd St., Shawnee, KS 66216 Tel. 913-631-0448 Fax. 913-631-1170 email xsis@xsis.com