1006A

Quality Innovations Customer Satisfaction PIEZOELECTRIC ACCELEROMETER • Vibration Measurement in Three Axes • No External Power Required • Frequency Response to 5 KHz • Resonance Frequency at 30 KHz • Light Weight (17 grams) • Thru-Hole Center Mount Description The VIP Sensors Model 1006A is a small triaxial piezoelectric accelerometer designed for vibration measurement in three orthogonal axes. Its light weight (17 grams) minimizes mass loading. The accelerometer is a self-generating device that requires no external power source for operation. The transducer features three 10-32 receptacles for output connection and is typically screw mounted. The Model 1006A utilizes the PZT-5 crystal material, exhibiting stable output sensitivity over the operating temperature range. Signal ground is connected to the case of the unit. Low-noise, flexible coaxial cables are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer. in (mm) actual size MODEL 1006A 0.984 (25) 0.787 (20) 0.984 (25) 0.787 (20) 2x 10-32 2-M5 Y X Z H = 0.40 (10) H=10 T ypical Amplitude Response 15.00 % DEVIATION 10.00 5.00 0.00 -5.00 1 10 100 1000 10000 Typical Temperature Response 15 10 5 0 -5 -10 -15 -50 (-46) 50 (10) 150 (66) 250 (121) % DEVIATION FREQUENCY (HZ) 350 (177) TEMPERATURE °F (°C) VIP Sensors California, USA Ph (949) 429 3558 Fx (949) 528 0126 info@vipsensors.com www.vipsensors.com VIP Sensors reserves the right to modify these specifications without notice. V01 Quality Innovations Customer Satisfaction PIEZOELECTRIC ACCELEROMETER SPECIFICATIONS The following performance specifications conform to ISA-RP-37.2 (1964) and are typical values, referenced at +75°F (+24°C) and 100 Hz, unless otherwise noted. Calibration data, traceable to National Institute of Standards and Technology (NIST), is supplied. MODEL 1006A UNITS DYNAMIC CHARACTERISTICS Axial Sensitivity Transverse Sensitivity Frequency Response Resonance Frequency Amplitude Response [1] +5% + 1 dB Temperature Response Amplitude Linearity ELECTRICAL CHARACTERISTICS Output Polarity Resistance Capacitance Grounding GΩ pF pC/g % Hz Hz Hz % 13 (10 minimum) ≤5 See Typical Amplitude Response 30,000 1 – 5,000 0.5 – 6,000 See Typical Temperature Response 1 1,500 Signal ground connected to case -4°F to 248°F (-20°C to +120°C) Epoxy sealed 2,000 0.004 5E-6 (0.5) 0.0144 (0.008) ENVIRONMENTAL CHARACTERISTICS Temperature Range Humidity Shock Limit g pk Base Strain equiv. g pk/µ strain Magnetic Field Sensitivity equiv. g rms/gauss (/T) Thermal Transient Sensitivity equiv. g pk/°F (/°C) PHYSICAL CHARACTERISTICS Weight Case Material Mounting Piezoelectric Material Structure Output Connector ACCESSORIES Included: 9006-120 Cable, Low Noise 10-32/10-32, 3.3 m, qty 3 9509-1 M5 Mounting Screw Calibration Certificate oz (grams) 0.6 (17) Stainless Steel Center mount with M5 screw, two side mounts with 10-32, torque 2 N-m (18 lbf-in) PZT-5 Flat Plate Shear 10-32 receptacles for X, Y and Z Optional: 9604 Cable Adapters 10-32/10-32 (extend cable length) NOTES 1. Low end response of the transducer is a function of its electronics. VIP Sensors California, USA Ph (949) 429 3558 Fx (949) 528 0126 info@vipsensors.com www.vipsensors.com VIP Sensors reserves the right to modify these specifications without notice. V01