1017A

Quality Innovations Customer Satisfaction PIEZOELECTRIC ACCELEROMETER • Small Size, Light Weight (2.8 grams) • Frequency Response to 5 KHz • Resonance Frequency at 21 KHz • Good for Shock Measurements • No External Power Required • Adhesive Mounting Description The VIP Sensors Model 1017A is a small piezoelectric accelerometer for vibration measurement on small structures and objects. Its light weight of 2.8 grams (without the low-noise cable) effectively minimizes mass loading. The accelerometer is a self-generating device that requires no external power source for operation. The Model 1017A exhibits a broad frequency response range and a high resonance frequency. Low-noise, flexible coaxial cables are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer. S=0.37 (9.5) Ø=0.43 (11) mm in (mm) actual size MODEL 1017A 10-32 (Out) 0.36 (9.14) Typical Amplitude Response 15.00 10.00 5.00 0.00 -5.00 1 10 100 1000 10000 100000 % DEVIATION T ypical Temperature Response 25 20 15 10 5 0 -5 -10 -50 (-46) 50 (10) 150 (66) 250 (121) 350 (177) FREQUENCY (HZ) TEMPERATURE °F (°C) VIP Sensors California, USA Ph (949) 429 3558 Fx (949) 528 0126 info@vipsensors.com www.vipsensors.com VIP Sensors reserves the right to modify these specifications without notice. V01 % DEVIATION Quality Innovations Customer Satisfaction PIEZOELECTRIC ACCELEROMETER SPECIFICATIONS The following performance specifications conform to ISA-RP-37.2 (1964) and are typical values, referenced at +75°F (+24°C) and 100 Hz, unless otherwise noted. Calibration data, traceable to National Institute of Standards and Technology (NIST), is supplied. MODEL 1017A UNITS DYNAMIC CHARACTERISTICS Axial Sensitivity Transverse Sensitivity Frequency Response Resonance Frequency Amplitude Response [1] +5% + 1 dB Temperature Response Amplitude Linearity ELECTRICAL CHARACTERISTICS Output Polarity Resistance Capacitance Grounding GΩ pF pC/g % Hz Hz Hz % 2 ≤5 See Typical Amplitude Response 21,000 1 to 5000 0.5 to 7000 See Typical Temperature Response 1 300 Signal ground connected to case -40°F to 302°F (-40°C to +150°C) Epoxy sealed 2000 0.002 1E-5 (1) 0.018 (0.01) ENVIRONMENTAL CHARACTERISTICS Temperature Range Humidity Shock Limit g pk Base Strain equiv. g pk/µ strain Magnetic Field Sensitivity equiv. g rms/gauss (/T) Thermal Transient Sensitivity equiv. g pk/°F (/°C) PHYSICAL CHARACTERISTICS Weight Case Material Mounting Piezoelectric Material Structure Output Connector ACCESSORIES Included: 9006-120 Cable, Low Noise 10-32/10-32, 10 ft (3.3 m) Calibration Certificate oz (grams) 0.1 (2.8) Stainless Steel Adhesive [2] PZT-5 Annular Shear 10-32 receptacle, top mounting Optional: 9604 Cable Adapter 10-32/10-32 (extend cable length) NOTES 1. 2. Low end response of the transducer is a function of its electronics. Adhesives such as cyanoacrylate epoxy (super glue), petro-wax and hot-melt glue and may be used to mount the accelerometer. VIP Sensors California, USA Ph (949) 429 3558 Fx (949) 528 0126 info@vipsensors.com www.vipsensors.com VIP Sensors reserves the right to modify these specifications without notice. V01