158X123

158X Series Type X2 Suppressor Capacitors Metallized Polyester / Radial Leads • Radial Leads in Two Lengths • UL-1414 and CSA Approved • Flame Retardant Case Meets UL94V-0 • Potting End Fill Meets UL94V-0 • Used in applications where damage to the capacitor will not lead to the danger of electrical shock • Lead Material Tinned Copper Clad Steel GENERAL SPECIFICATIONS . Operating Temperature: -40 °C to +100 °C Voltage Range: 275/250 VAC, 60 Hz Capacitance Range: 0.01 µF to 2.2 µF Capacitance Tolerance: ±20% (Standard) ±10% (Special) Dissipation Factor (DF) tgδ 0.01 Max at 1,000 ± 100kHz Insulation Resistance (IR) (@ 500 VDC and 20 °C) Terminal to Terminal: ≤0.33µF 15,000 MΩ min ≥0.47µF 5,000 MΩ x µF min Both Terminals to Body: 100,000 MΩ min Maximum Pulse Rise Time µF .010 .022 .033 .047 .068 .100 V/µs 2800 2400 2400 2000 2000 1600 µF 0.22 0.47 0.68 1.00 1.50 2.20 V/µs 1200 1000 1000 800 800 600 International Approvals Safety Agency UL UL CSA VDE SEMKO FIMKO DEMKO NEMKO Standard UL-1414 (250VAC) UL-1283 (250VAC) C22 2, No. 1-98/No.8 (250VAC) IEC384-14 II EN 132400 IEC384-14 II EN 132400 IEC384-14 II EN 132400 IEC384-14 II EN 132400 IEC384-14 II EN 132400 File Number E171988 E223166 1572961 109365 9817262 11141 9817262 P98101124 Outline Dimensions Ratings Inches Catalog Part Number 158X103 158X123 158X153 158X183 158X223 158X273 158X333 158X393 158X473 158X563 158X683 158X823 158X104 158X124 158X154 158X184 158X224 158X274 158X334 158X394 158X474 158X564 158X684 158X824 158X105 158X125 158X155 158X185 158X225 Cap (µF) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.100 0.120 0.150 0.180 0.220 0.270 0.330 0.390 0.470 0.560 0.680 0.820 1.000 1.200 1.500 1.800 2.200 L Length 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.669 0.984 0.984 0.984 0.984 1.181 0.984 1.181 1.181 1.181 1.181 1.201 1.201 1.614 1.614 1.614 1.614 T Thickness 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.217 0.217 0.256 0.256 0.256 0.315 0.256 0.256 0.315 0.315 0.354 0.394 0.433 0.433 0.531 0.531 0.630 0.591 0.610 0.610 0.689 0.689 H Height 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.492 0.492 0.531 0.531 0.591 0.591 0.630 0.630 0.689 0.689 0.669 0.768 0.866 0.866 0.965 0.965 1.102 0.965 1.102 1.102 1.280 1.280 S Spacing 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.886 0.886 0.886 0.886 1.083 0.886 1.083 1.083 1.083 1.083 1.083 1.083 1.476 1.476 1.476 1.476 Ød 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.031 0.039 0.039 0.039 0.039 0.039 0.039 L Length 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 25.0 25.0 25.0 25.0 30.0 25.0 30.0 30.0 30.0 30.0 30.5 30.5 41.0 41.0 41.0 41.0 T Thickness 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.5 5.5 6.5 6.5 6.5 8.0 6.5 6.5 8.0 8.0 9.0 10.0 11.0 11.0 13.5 13.5 16.0 15.0 15.5 15.5 17.5 17.5 RoHS Compliant Millimeters H Height 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.5 12.5 13.5 13.5 15.0 15.0 16.0 16.0 17.5 17.5 17.0 19.5 22.0 22.0 24.5 24.5 28.0 24.5 28.0 28.0 32.5 32.5 S Spacing 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 27.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 Ød 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 NOTE: If ±10% tolerance is required, add 'K' to end of Catalog Number NOTE: Parts are normally supplied with leads 30mm minimum To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com