170104400GC

High Current / Low ESR, Wrap and Fill Axial Leaded Capacitors Type 170 Axial Leaded Metallized Polypropylene The Type 170 series axial lead metallized polypropylene capacitors are available in bulk or on tape and reel for automatic insertion. The tape wrap and epoxy end fill construction meets UL510 (outer wrap) and UL94V0 (epoxy). Type 170 is non-inductive with low ESR and high current capability for switch-mode power supply applications Highlights • • • • • • Low ESR High current Available on tape and reel or bulk Epoxy end fill meets UL94V-0 Non inductively wound Flame retardant outer wrap meets UL510 Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation Factor (DF): 0.001 µF to 4.7 µF 160 to 630 Vdc (90 to 250 Vac, 60 Hz) ±5%, ±10%, ±20% –55 ºC to +105 ºC (derate linearly to 50% rated 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC tgδ x 10–4 at +25 ºC ±5 ºC kHz 1 10 100 C ≤0.1 µF ≤6 ≤10 ≤30 0.1 µF 1 µF ≤6 — — voltage at 105 ºC) Insulation Resistance: Self Inductance: Life Test: Damp Heat Test: Soldering: Long Term Storage Stability: Maximum Pulse Rise Time dv/dt and Pulse Characteristic (Wo): Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). 100,000 MΩ x µF, 200,000 MΩ Min. 1 nH max. per 1 mm lead and body length 1000 hrs @ 85 ºC 1.25 x Vn 95% RH @ +40 ºC for 21 days 260 ºC ±5 ºC for 10 s ±1 s ΔC/C ≤ ±0.5% after 2 years L Max Vn 160 250 400 630 11 5 11 – – 16.5 5 10 13.5 20 20.5 3 7 10 15 28 2 4 6.5 10 33 1 2.5 4 6 Outline Drawing If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt . In this case, the maximum value allowed is obtained by multiplying the above value (See table dv/dt) with the ratio Vn/V Ød ±.002 ±0.05 mm) 1.58 ±0.2 (40 ±5 mm) L Max 1.58 ±0.2 (40 ±5 mm) D Max Lead Material: tinned copper wire CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene Tape and Reel Specifications L Max (Body Length) Inches ≤.433 ≥1.03 Λ Lead Spacing Inches 2.06 2.50 2.87 mm 52.4 63.6 73.0 Distance Between Reel Flanges Inches 3.0 3.4 3.7 mm 75 86 95 1 2 3 Class Inches 0.197 Diameter mm 5 6.0 thru 6.5 7 8 thru 8.5 9 thru 10.5 11 thru 13 14 thru 14.5 14.5 Inches (mm) Quantity per Reel 3,000 1,200 1,100 800 500 300 200 Not available ESR (mΩ) 20 kHz IRMS (Amps) mm ≤11 ≥26 .236 thru .256 0.276 .315 thru .346 .354 thru .413 .433 thru .512 .551 thru .571 >0.571 .551 - .808 14 - 20.5 Add class number (1, 2 or 3) to Catalog Part Number to indicate tape and reel Ratings Inches (mm) ESR (mΩ) 20 kHz Cap (µF) Catalog Part Number D Max L Max to Cap (µF) IRMS (Amps) Catalog Part Number D Max L Max to Ød 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.031 (0.8) 0.031 (0.8) 100 kHz 25 ºC 45 ºC 85 ºC 250 Vdc / 200 Vac 60 Hz 0.01 0.01 0.012 0.012 0.015 0.015 0.018 0.022 Not applicable. These capacitance values are not customarily used in switched-mode power supplies. 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 37 35 33 31 26 20 18 16 15 8.7 3.9 4.1 4.3 5.5 6.1 6.8 7.4 8.1 3.1 3.3 3.5 3.6 4.7 5.1 5.7 6.4 6.8 1.4 1.5 1.6 1.7 2.6 3.1 3.3 3.6 3.9 0.33 0.39 0.47 0.56 0.68 0.82 1 1.5 2.2 3.3 170103*250AA^ 170103*250BB^ 170123*250AA^ 170123*250BB^ 170153*250AA^ 170153*250BB^ 170183*250BB^ 170223*250BB^ 170273*250BB^ 170333*250BB^ 170393*250CB^ 170473*250CB^ 170563*250EB^ 170683*250EB^ 170823*250FB^ 170104*250FB^ 170124*250FC^ 170154*250FC^ 170184*250HC^ 170224*250HC^ 170274*250GE^ 170334*250GE^ 170394*250JE^ 170474*250JE^ 170564*250ME^ 170684*250ME^ 170824*250NF^ 170105*250NF^ 170155*250TF^ 170225*250XF^ 170335*250ZF^ 0.197 (5.0) 0.236 (6.0) 0.197 (5.0) 0.236 (6.0) 0.197 (5.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.256 (6.5) 0.256 (6.5) 0.315 (8.0) 0.315 (8.0) 0.335 (8.5) 0.335 (8.5) 0.335 (8.5) 0.335 (8.5) 0.374 (9.5) 0.374 (9.5) 0.354 (9.0) 0.354 (9.0) 0.413 (10.5) 0.413 (10.5) 0.472 (12.0) 0.472 (12.0) 0.512 (13.0) 0.512 (13.0) 0.610 (15.5) 0.709 (18.0) 0.827 (21.0) 0.433 (11.0) 0.65 (16.5) 0.433 (11.0) 0.65 (16.5) 0.433 (11.0) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.807 (20.5) 0.807 (20.5) 0.807 (20.5) 0.807 (20.5) 1.102 (28) 1.102 (28) 1.102 (28) 1.102 (28) 1.102 (28) 1.102 (28) 1.299 (33) 1.299 (33) 1.299 (33) 1.299 (33) 1.299 (33) Ød 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.024 (0.6) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.039 (1.0) 0.039 (1.0) 100 kHz 25 ºC 45 ºC 85 ºC 160 Vdc / 90 Vac 60 Hz 0.022 0.022 0.027 0.027 0.033 0.033 0.039 0.039 0.047 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.5 2.2 3.3 4.7 170223*160AA^ 170223*160BB^ 170273*160AA^ 170273*160BB^ 170333*160AA^ 170333*160BB^ 170393*160AA^ 170393*160BB^ 170473*160AA^ 170473*160BB^ 170563*160BB^ 170683*160BB^ 170823*160BB^ 170104*160BB^ 170124*160DB^ 170154*160DB^ 170184*160EB^ 170224*160EB^ 170274*160EC^ 170334*160EC^ 170394*160HC^ 170474*160HC^ 170564*160GE^ 170684*160GE^ 170824*160JE^ 170105*160JE^ 170155*160ME^ 170225*160PF^ 170335*160TF^ 170475*160XF^ 0.197 (5.0) 0.236 (6.0) 0.197 (5.0) 0.236 (6.0) 0.197 (5.0) 0.236 (6.0) 0.197 (5.0) 0.236 (6.0) 0.197 (5.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.276 (7.0) 0.276 (7.0) 0.315 (8.0) 0.315 (8.0) 0.315 (8.0) 0.315 (8.0) 0.374 (9.5) 0.374 (9.5) 0.354 (9.0) 0.354 (9.0) 0.413 (10.5) 0.413 (10.5) 0.472 (12.0) 0.531 (13.5) 0.610 (15.5) 0.709 (18.0) 0.433 (11.0) 0.65 (16.5) 0.433 (11.0) 0.65 (16.5) 0.433 (11.0) 0.65 (16.5) 0.433 (11.0) 0.65 (16.5) 0.433 (11.0) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) 0.65 (16.5) Not applicable. These capacitance values are not customarily used in switched-mode power supplies. 0.807 (20.5) 0.031 (0.8) 0.807 (20.5) 0.031 (0.8) 0.807 (20.5) 0.031 (0.8) 0.807 (20.5) 0.031 (0.8) 1.102 (28) 1.102 (28) 1.102 (28) 1.102 (28) 1.102 (28) 1.299 (33) 1.299 (33) 1.299 (33) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) 0.039 (1.0) 0.039 (1.0) 35 33 32 31 28 26 20 18 3.8 3.9 4 4.2 4.4 5.1 8.4 9 3.6 3.7 3.8 4 4.4 4.9 7 7.8 1.7 1.8 1.9 2 3.2 3.5 4.1 4.5 * Indicates capacitance tolerance J = ±5%, K = ±10%, M = ±20% ^If ordering tape and reel, insert 1,2, or 3. See tape & reel specifications to determine which class applies. Part Number highlighted in yellow, available until stock is depleted. Replacement Part No. with "BB" case size. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene Cap Inches (mm) D Max L Max Ød ESR (mΩ) 20 kHz to IRMS (Amps) Cap (µF) Inches (mm) D Max L Max Ød ESR (mΩ) 20 kHz to IRMS (Amps) Catolog Catolog Part Number (µF) Part Number 100 kHz 25 ºC 45 ºC 85 ºC 100 kHz 25 ºC 45 ºC 85 ºC 400 Vdc / 220 Vac 60 Hz 0.015 170153*400BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.018 170183*400CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.022 170223*400CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.027 170273*400DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.033 170333*400DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.039 170393*400EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.047 170473*400EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.056 170563*400EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) Not applicable. 0.068 170683*400EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) These capacitance values 0.082 170823*400GC^ 0.354 (9.0) 0.807 (20.5) 0.031 (0.8) are not customarily used in switched-mode power supplies 0.10 170104*400GC^ 0.354 (9.0) 0.807 (20.5) 0.031 (0.8) 0.12 170124*400FE^ 0.335 (8.5) 1.102 (28) 0.031 (0.8) 0.15 170154*400FE^ 0.335 (8.5) 1.102 (28) 0.031 (0.8) 0.18 170184*400IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.22 170224*400IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.27 170274*400LE^ 0.453 (11.5) 1.102 (28) 0.031 (0.8) 0.33 170334*400LE^ 0.453 (11.5) 1.102 (28) 0.031 (0.8) 0.39 170394*400NE^ 0.512 (13.0) 1.102 (28) 0.031 (0.8) 0.47 170474*400NE^ 0.512 (13.0) 1.102 (28) 0.031 (0.8) 0.56 170564*400QF^ 0.571 (14.5) 1.299 (33) 0.031 (0.8) 0.68 170684*400QF^ 0.571 (14.5) 1.299 (33) 0.031 (0.8) 0.82 170824*400VF^ 0.669 (17) 1.299 (33) 0.039 (1.0) 1.0 170105*400VF^ 0.669 (17) 1.299 (33) 0.039 (1.0) 1.5 170155*400YF^ 0.807 (20.5) 1.299 (33) 0.039 (1.0) 32 31 30 28 27 25 5.7 5 2.2 5.7 5.3 2.3 5.7 5.5 2.4 5.7 5.6 2.6 5.7 5.7 4.3 7 6.7 4.7 630 Vdc / 250 Vac 60 Hz 0.001 170102*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0012 170122*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0015 170152*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0018 170182*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0022 170222*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0027 170272*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0033 170332*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0039 170392*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0047 170472*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0056 170562*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0068 170682*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.0082 170822*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.010 170103*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.012 170123*630EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) Not Applicable. 0.018 170183*630FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) These capacitance values 0.022 170223*630FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) are not customarily used in switched-mode power supplies 0.027 170273*630FC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.033 170333*630FC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.039 170393*630HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.047 170473*630HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.056 170563*630GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.068 170683*630GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.082 170823*630IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.100 170104*630IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.120 170124*630ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 0.150 170154*630ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 0.180 170184*630NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 0.220 170224*630NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 0.270 170274*630TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 0.330 170334*630TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 0.390 170394*630XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 0.470 170474*630XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 0.560 170564*630ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 0.680 170684*630ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 28 26 25 6.8 5.8 2.6 7.4 6.3 2.8 7.8 6.8 2.9 0.015 170153*630EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) * Indicates Tolerance J = ±5%, K = ±10%, M = ±20% Λ If ordering Tape & Reel, see specification to determine which class (1, 2, or 3) applies CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com