200-510-0850G

Contents Overview RDM D-Subminiature Connectors RDM 31 Series Contacts • Specifications & Interface Dimensions RDM 31 Series Contacts RDM Standard Series Contacts • Specifications & Interface Dimensions RDM Standard Series Contacts RDM-HF Series Contacts • Specifications & Interface Dimensions RDM-HF Series Contacts RDM 75 Ohm Contacts • Specifications & Interface Dimensions RDM 75 Ohm Contacts RDM High Power Contacts • Specifications & Interface Dimensions RDM High Power Contacts RDM High Voltage Contacts RDM 40 Series For DIN Style Housings • Specifications & Interface Dimensions RDM 40 Series For DIN Style Housings D-Subminiature Housings D-Subminiature Ordering Guide D-Subminiature Selection Guide D-Subminiature PCB Signal Contact Selection / Mounting Options D-Subminiature Guide Pin Plates D-Subminiature Shell Dimensions D-Subminiature Edge Mount Connectors / PC Board Footprints D-Subminiature Right Angle Mounting Dimensions D-Subminiature Printed Circuit Board Footprint Cable Reference Table Mounting Hole Layouts Cable Assembly Procedures Tools Other Product Offerings 33 34-35 36 37 38 39 40 41-76 77 78 79-88 89-90 91-92 4 5-8 9 10-14 15 16-19 20 21-24 25 26-27 28 29 30-32 2-3 While the information in this publication is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester/Retconn disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Consult factory for specific information on the latest design specifications. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/1 OVERVIEW • RDM Product Line SERIES DESCRIPTION CENTER CONTACT OUTER BODY TYPICAL VIEW 14 20 21 22 23 24 26 27 28 29 30 DS/2 75 Ohm crimp similar to the Plug: Female Plug: Male Socket 24 Series. Specifically Receptacle: .040 designed for an AMP Receptacle: Female Dia. Male Pin housing. Standard Series; solder / crimp and solder / solder types. Rated to 900 MHz. Plug: Female Plug: Male Socket Receptacle: .040 Receptacle: Female Dia. Male Pin. Similar to the 20 Series, thru Plug: Female Plug: Male Socket 50 Ohm. Popular with cellular manufacturers. Rated to Receptacle: .030 Receptacle: Female Dia. Male pin 2 GHz. High Power Contacts solder, crimp, and P.C. pin type. High Voltage Contacts, teflon bodies. NONE NONE Plug: Male Receptacle: Female Plug: Female Plug: Male Socket Receptacle: .040 Receptacle: Female Dia. Male Pin Plug: Female 75 Ohm crimp / crimp Plug: Male Socket popular with computer work Receptacle: .040 station manufacturers. Receptacle: Female Dia. Male Pin Standard series, crimp / Plug: Female Plug: Male crimp for flexible cable, solSocket der / solder for semi-rigid Receptacle: .040 Receptacle: Female cable. Rated to 1500 MHz. Dia. Male Pin Plug: Female Similar to the 20 Series, Plug: Male Socket except 75 Ohm impedance. Popular with CATV / Video Receptacle: .040 Receptacle: Female Dia. Male Pin applications. Similar to the 20 Series, except, fits into a DIN Housing. DIN 41612. Plug: Female Plug: Male Socket Receptacle: .040 Dia. Male Pin Receptacle: Female Thru-50 crimp / crimp (cellu- Plug: Female Plug: Male lar mftr.) crimp / crimp for Socket flexible cable solder / sol- Receptacle: .030 der, for semi-rigid cables. Dia. Male Pin Receptacle: Female Plug: Female DIN Coax Contacts for DIN Plug: Male Socket Housings. 50 Ohm meet DIN Receptacle: .020 Specifications. Dia. Male Pin Receptacle: Female Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com OVERVIEW • RDM Product Line SERIES DESCRIPTION CENTER CONTACT Plug: Female Socket Receptacle: .040 Dia. Male Pin NONE NONE Plug: Female socket Receptacle: .015 Dia. Male Pin Plug: Female Socket Receptacle: .040 Dia. Male Pin OUTER BODY Plug: Male Receptacle: Female Plug: Male Receptacle: Female Plug: Male Receptacle: Female Plug: Male Receptacle: Female TYPICAL VIEW 31 32 37 40 Blind Mate Contact, fits in standard housing. Rated to 5 GHz. Mates with PkZ. High Power Contacts, solder and crimp types for DIN housings. Similar to 22 Series. Similar to 30 Series, except 75 Ohms. Similar to 31 Series fits in DIN housing. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/3 31 SERIES: MECHANICAL: Specifications & Interface Dimensions ELECTRICAL: Impedance: 50 Ohms Nominal Frequency Range: 0 to 5.0 GHz Insulation Resistance: 5000 Megaohms Minimum Contact Resistance: (Milliohms maximum) Center Contact: 5.0 Outer Contact: 3.0 Voltage Standing Wave Ratio: 0 to 5.0 GHz Straight Connector: 1.15 +.02F GHz on RG-316 Cable Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-Rigid Cable Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies, Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Beryllium Copper per ASTM B194 Finish: Body: Gold Plated per MIL-G-45204 Center Contact: Gold Plated per MIL-G-45204 Clip Ring: Nickel Plated per QQ-N-290 ENVIRONMENTAL: Operating Temperature: -55ºC to +125ºC Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B MATING CHARACTERISTICS: Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001/-.0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 +.0000/-.0001 Dia. Pin Plugs, Center Contact: 31 Series Coaxial Contacts fit all D-Subminiature Connectors and 16 oz. Maximum Insertion on a .0410 +.0001/-.0000 Dia. Pin and are interchangeable with other manufacturer’s product. Available a .5 oz. Minimum Withdrawl on a .0390 +.0000/-.0001 Dia. Pin in crimp or solder cable terminations. Retention in Shell: 15 lbs. Minimum GENERAL INFORMATION: Plug Interface Receptacle Interface Winchester/Retconn DS/4 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM 31 SERIES: Straight Plug Printed Circuit Board Contacts Part Number 310-010-6040G Mounting Hole N0. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Straight Receptacle Part Number 311-010-6040G Mounting Hole N0. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Plug Part Number 312-010-6040G Mounting Hole N0. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Receptacle Part Number 313-010-6040G Mounting Hole N0. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Straight Plug Part Number 310-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/5 RDM 31 SERIES: Straight Receptacle Printed Circuit Board Contacts Part Number 311-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Plug Part Number 312-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Receptacle Part Number 313-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. RDM 31 SERIES: Straight Plug Crimp / Crimp, Flexible Cable Part Number 310-910-0630G 310-910-0631G 310-910-1160G 310-910-1161G Cable RG- 316, 188 RG- 316 DS RG- 141, 58 RG- 142, 223 “A” DIM .93 .93 1.09 1.09 “B” DIM .067 .067 .120 .120 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn DS/6 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM 31 SERIES: Straight Receptacle Crimp / Crimp, Flexible Cable Part Number 311-910-0630G 311-910-0631G 311-910-1160G 311-910-1161G Cable RG- 316, 188 RG- 316 DS RG- 141, 58 RG- 142, 223 “A” DIM .89 .89 1.05 1.05 “B” DIM .067 .067 .120 .120 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. Right Angle Plug Part Number 312-910-0630G 312-910-0631G 312-910-1160G 312-910-1161G Cable “A” DIM RG- 316, 188 .75 RG- 316 DS .75 RG- 141, 58 .75 RG- 142, 223 .75 “B” DIM .067 .067 .120 .120 “C” DIM .50 .50 .60 .60 • See page 88 for cable assembly procedures: CAP 9-16 • Part number shown is for standard gold plating. Right Angle Receptacle Part Number 313-910-0630G 313-910-0631G 313-910-1160G 313-910-1161G Cable “A” DIM RG- 316, 188 .77 RG- 316 DS .77 RG- 141, 58 .77 RG-142, 223 .77 “B” DIM .067 .067 .120 .120 “C” DIM .50 .50 .60 .60 • See page 88 for cable assembly procedures: CAP 9-16 • Part number shown is for standard gold plating. RDM 31 SERIES: Straight Plug Solder / Solder, Semi-Rigid Cable Part Number 310-510-0850G 310-510-1410G Cable “A” DIM RG- 405 (.085 SR) .79 RG- 402 (.141 SR) .79 “B” DIM .090 .148 • See page 83 for cable assembly procedures: CAP 5-15 • Part number shown is for standard gold plating. Straight Receptacle Part Number 311-510-0850G 311-510-1410G Cable “A” DIM RG- 405 (.085 SR) .75 RG- 402 (.141 SR) .75 “B” DIM .090 .148 • See page 83 for cable assembly procedures: CAP 5-15 • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/7 RDM 31 SERIES: Right Angle Plug Solder / Solder, Semi-Rigid Cable Part Number 312-510-0850G 312-510-1410G Cable “A” DIM RG- 405 (.085 SR) .75 RG- 402 (.141 SR) .75 “B” DIM .090 .148 “C” DIM .31 .31 • See page 84 for cable assembly procedure: CAP 5-16 • Part number shown is for standard gold plating. Right Angle Receptacle Part Number 313-510-0850G 313-510-1410G Cable “A” DIM RG- 405 (.085 SR) .77 RG- 402 (.141 SR) .77 “B” DIM .090 .148 “C” DIM .31 .31 • See page 84 for cable assembly procedures: CAP 5-16 • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn DS/8 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM: Specifications & Interface Dimensions MECHANICAL: Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies, Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Phosphor Bronze per ASTM B103 Finish: Body: Gold Plated per MIL-G-45204 Center Contact: Gold Plated per MIL-G-45204 Clip Ring: Nickel Plated per QQ-N-290 ELECTRICAL: Impedance: 50 Ohms Nominal Frequency Range: 0 to 900 MHz Insulation Resistance: 1000 Megaohms Minimum Contact Resistance: ( Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 ENVIRONMENTAL: Operating Temperature: -55ºC to +125ºC Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition l Corrosion Resistance: MIL-STD-202, Method 101, Condition B MATING CHARACTERISTICS: Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 + .0001 / - .0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 + .0000 / - .0001 Dia. Pin Plugs, Center Contact: 16 oz. Maximum Insertion on a .0410 + .0001 /- .0000 Dia. Pin and .5 oz. Minimum Withdrawl on a .0390 + .0000 / - .0001 Dia. Pin Retention in Shell: Plugs and Receptacles: 15 lbs. Minimum GENERAL INFORMATION: RDM Coaxial Contacts fit all D-Subminiature Connectors and are available in crimp or solder cable terminations. Plug Interface Receptacle Interface Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/9 RDM: Solder / Solder, Semi-Rigid Cable Part Number 201-510-0470G 201-510-0850G 201-510-1410G Cable .047 SR .085 SR .141 SR Straight Receptacle • See page 81 for cable assembly procedures: CAP 5-09 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Straight Plug Part Number 200-510-0470G 200-510-0850G 200-510-1410G Cable .047 SR .085 SR .141 SR • See page 81 for cable assembly procedures: CAP 5-09 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Receptacle Part Number 203-510-0470G 203-510-0850G 203-510-1410G Cable .047 SR .085 SR .141 SR “A”DIM .29 .35 .35 • See page 82 for cable assembly procedures: CAP 5-10 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Plug Part Number 202-510-0470G 202-510-0850G 202-510-1410G Cable .047 SR .085 SR .141 SR “A”DIM .29 .35 .35 • See page 82 for cable assembly procedures: CAP 5-10 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. RDM: Solder / Solder, Flexible Cable Part Number 201-510-0360G 201-510-0630G 201-510-1070G 201-510-1160G 201-510-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 “A” DIM .93 .93 1.03 1.03 1.03 Straight Receptacle • See page 79 for cable assembly procedures: CAP 5-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Dimensions shown are in inches. Winchester/Retconn DS/10 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM: Solder / Solder, Flexible Cable Part Number Cable “A” DIM 200-510-0360G RG- 178, 196 .93 200-510-0630G RG- 316, 188 .93 200-510-1070G RG- 180, 195 1.03 200-510-1160G RG- 141, 58 1.03 200-510-1161G RG- 142, 223 1.03 • See page 79 for cable assembly procedures: CAP 5-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Part Number 203-510-0360G 203-510-0630G 203-510-1070G 203-510-1160G 203-510-1161G Cable “A” DIM RG- 178, 196 .49 RG- 316, 188 .49 RG- 180, 195 .49 RG- 141, 58 .49 RG- 142, 223 .49 Straight Plug Right Angle Receptacle • See page 80 for cable assembly procedures: CAP 5-08 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Part Number Cable “A” DIM 202-510-0360G RG- 178, 196 .49 202-510-0630G RG- 316, 188 .49 202-510-1070G RG- 180, 195 .60 202-510-1160G RG- 141, 58 .60 202-510-1161G RG- 142, 223 .60 • See page 80 for cable assembly procedures: CAP 5-08 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Plug RDM: Solder / Crimp, Flexible Cable Part Number 201-910-0360G 201-910-0630G 201-910-1070G 201-910-1160G 201-910-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 “A” DIM .93 .93 1.03 1.03 1.03 Straight Receptacle • See page 85 for cable assembly procedures: CAP 9-01 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/11 RDM: Solder / Crimp, Flexible Cable Part Number 200-910-0360G 200-910-0630G 200-910-1070G 200-910-1160G 200-910-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 “A” DIM .93 .93 1.03 1.03 1.03 Straight Plug • See page 85 for cable assembly procedures: CAP 9-01 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Receptacle Part Number 203-910-0360G 203-910-0630G 203-910-1070G 203-910-1160G 203-910-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 “A” DIM .49 .49 .60 .60 .60 • See page 86 for cable assembly procedures: CAP 9-02 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Plug Part Number 202-910-0360G 202-910-0630G 202-910-1070G 202-910-1160G 202-910-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 “A” DIM .49 .49 .60 .60 .60 • See page 86 for cable assembly procedures: CAP 9-02 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. RDM: Crimp / Crimp, Flexible Cable Part Number 261-910-0630G 261-910-1070G 261-910-1160G 261-910-1161G Cable RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 “A” DIM .84 1.00 1.00 1.00 Straight Receptacle • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Straight Plug Part Number 260-910-0630G 260-910-1070G 260-910-1160G 260-910-1161G Cable “A” DIM RG- 316, 188 .86 RG- 180, 195 1.01 RG- 141, 58 1.01 RG- 142, 223 1.01 Dimensions shown are in inches. • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Winchester/Retconn DS/12 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM: Printed Circuit Board Contacts Part Number 201-010-6140G Mounting Hole NO. 061 Straight Receptacle • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Straight Plug Part Number 200-010-6140G Mounting Hole NO. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Receptacle Part Number 203-010-6140G Mounting Hole NO. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Right Angle Plug Part Number 202-010-6140G Mounting Hole NO. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. RDM: Same - Series Adapters Part Number 201-201-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Receptacle / Receptacle Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/13 RDM: Same - Series Adapters Part Number 200-200-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. Plug / Plug Plug / Receptacle Part Number 200-201-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H”. • For commercial finish change suffix to “C”. RDM: Between Series Adapters Part Number 200-350-0000H • Part number shown is for gold plating. • For nickel plate change suffix to “N” RDM Plug / SMA Plug RDM Receptacle SMA Jack Part Number 201-351-0000H • Part number shown is for gold plating. • For nickel plate change suffix to “N” RDM Receptacle SMA Plug Part Number 201-350-0000H • Part number shown is for gold plating. • For nickel plate change suffix to “N” RDM Plug / SMA Jack Part Number 200-351-0000H • Part number shown is for gold plating. • For nickel plate change suffix to “N” Dimensions shown are in inches. Winchester/Retconn DS/14 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM - HF: MECHANICAL: Specifications & Interface Dimensions ELECTRICAL: Impedance: 50 Ohms Nominal Frequency Range: 0 to 1500 MHz Insulation Resistance: 1000 Megaohms Minimum Contact Resistance: (Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 Dielectric Withstanding Voltage (DWV): Straight: 1000 VRMS Right Angle: 800 VRMS Voltage Standing Wave Ratio: 1.15 Maximum from 0 to 1200 MHz 1.35 Maximum from 1200 to 1500 MHz Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies, Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Phosphor Bronze per ASTM B103 Finish: Body: Gold Plated per MIL-G-4504 Center Contact: Gold Plated per MIL-G-45204 Clip Ring: Nickel Plated per QQ-N-290 MATING CHARACTERISTICS Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / - .0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 + .0000/ .0001 Dia. Pin Plugs, Center Contact: 16oz. Maximum Insertion on a .0410 + .0001 / - .0000 Dia. Pin and a 5 oz. Minimum Withdrawl on a .0390 + .0000 / - .0001 Dia. Pin Retention in Shell: 15 lbs. Minimum ENVIRONMENTAL: Operating Temperature: -55ºC to +125ºC Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B GENERAL INFORMATION: RDM Coaxial Contacts fit all D-Subminiature Connectors and are interchangeable with other manufacturer’s product. Available in crimp or solder cable terminations. Plug Interface Receptacle Interface Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/15 RDM - HF: Straight Receptacle Solder / Solder, Semi-Rigid Cable Part Number 211-510-0470G 211-510-0850G 211-510-1410G Cable .047 SR .085 SR .141 SR • See page 81 for cable assembly procedures: CAP 5-09 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Plug Part Number 210-510-0470G 210-510-0850G 210-510-1410G Cable .047 SR .085 SR .141 SR • See page 81 for cable assembly procedures: CAP 5-09 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 213-510-0470G 213-510-0850G 213-510-1410G Cable .047 SR .085 SR .141 SR “A” DIM .29 .35 .35 • See page 82 for cable assembly procedures: CAP 5-10 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 212-510-0470G 212-510-0850G 212-510-1410G Cable .047 SR .085 SR .141 SR “A” DIM .29 .35 .35 • See page 82 for cable assembly procedures: CAP 5-10 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM - HF: Straight Receptacle Solder / Crimp, Flexible Cable Part Number 211-910-0360G 211-910-0630G 211-910-1070G 211-910-1160G 211-910-1161G Cable “A” DIM RG- 178, 196 .93 RG- 316, 188 .93 RG- 180, 195 1.03 RG- 141, 58 1.03 RG- 142, 223 1.03 • See page 85 for cable assembly procedures: CAP 9-01 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn DS/16 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM - HF: Straight Plug Solder / Crimp, Flexible Cable Part Number 210-910-0360G 210-910-0630G 210-910-1070G 210-910-1160G 210-910-1161G Cable “A” DIM RG- 178, 196 .93 RG- 316, 188 .93 RG- 180, 195 1.03 RG- 141, 58 1.03 RG- 142, 223 1.03 • See page 85 for cable assembly procedures: CAP 9-01 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 213-910-0360G 213-910-0630G 213-910-1070G 213-910-1160G 213-910-1161G Cable “A” DIM RG- 178, 196 .49 RG- 316, 188 .49 RG- 180, 195 .60 RG- 141, 58 .60 RG- 142, 223 .60 • See page 86 for cable assembly procedures: CAP 9-02 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 212-910-0360G 212-910-0630G 212-910-1070G 212-910-1160G 212-910-1161G Cable “A” DIM RG- 178, 196 .49 RG- 316, 188 .49 RG- 180, 195 .60 RG- 141, 58 .60 RG- 142, 223 .60 • See page 86 for cable assembly procedures: CAP 9-02 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM - HF: Straight Receptacle Crimp / Crimp, Flexible Cable Part Number 291-910-0630G 291-910-1070G 291-910-1160G 291-910-1161G Cable “A” DIM RG- 316, 188 .84 RG- 180, 195 1.00 RG- 141, 58 1.00 RG 142, 223 1.00 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/17 RDM - HF: Straight Plug Crimp / Crimp, Flexible Cable Part Number 290-910-0630G 290-910-1070G 290-910-1160G 290-910-1161G Cable “A” DIM RG- 316, 188 .86 RG- 180, 195 1.01 RG- 141, 58 1.01 RG- 142, 223 1.01 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM - HF: Straight Receptacle Printed Circuit Board Contacts Part Number 211-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Plug Part Number 210-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 213-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 212-010-6140G Mounting Hole N0. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn DS/18 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM - HF: Receptacle / Receptacle Same - Series Adapters Part Number 211-211-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Plug / Plug Part Number 210-210-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Plug / Receptacle Part Number 210-211-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/19 RDM 75 OHM: MECHANICAL: Specifications & Interface Dimensions ELECTRICAL: Impedance: 75 Ohm Nominal Frequency Range: 0 - 2 GHz Insulation Resistance: 1000 Megaohms Minimum Contact Resistance: (Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 Dielectric Withstanding Voltage (DWV): Straight: 1000 VRMS Right Angle: 800 VRMS Voltage Standing Wave Ratio: 1.05 Maximum from 0 to 1000 MHz 1.25 Maximum from 1000 to 2000 MHz Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2/ HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Phosphor Bronze per ASTM B103 Finish: Body:Gold Plated per MIL-STD-45204 Center Contact: Gold Plated per MIL-STD-45204 Clip Ring: Nickel Plated per QQ-N-290 MATING CHARACTERISTICS: Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / -.0000 Dia. Pin and 4 oz. Minimum Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin Plugs, Center Contact: 16 oz. Maximum Insertion on a .0419 +.0001 / -.0000 Dia. Pin and 5 oz. Minimum Withdrawl on a .0390 +.0000 /-.0001 Dia. Pin Retension in Shell: 15 lbs. Minimum ENVIRONMENTAL: Operating Temperature: -55ºC to +125ºC Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B GENERAL INFORMATION: RDM Coaxial Contacts fit all D-Subminiature Connectors and are interchangeable with other manufacturer’s product. Available in crimp or solder cable versions. Plug Interface Receptacle Interface Dimensions shown are in inches. Winchester/Retconn DS/20 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM 75 OHM: Straight Receptacle Solder / Solder, Semi-Rigid Cable Part Number 271-510-0470G 271-510-0850G 271-510-1410G Cable .047 SR .085 SR .141 SR • See page 81 for cable assembly procedures: CAP 5-09 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Plug Part Number 270-510-0470G 270-510-0850G 270-510-1410G Cable .047 SR .085 SR .141 SR • See page 81 for cable assembly procedures: CAP 5-09 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 273-510-0470G 273-510-0850G 273-510-1410G Cable .047 SR .085 SR .141 SR “A” DIM .29 .35 .35 • See page 82 for cable assembly procedures: CAP 5-10 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 272-510-0470G 272-510-0850G 272-510-1410G DIM Cable “A” DIM .047 SR .29 .085 SR .35 .141 SR .35 • See page 82 for cable assembly procedures: CAP 5-10 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM 75 OHM: Straight Receptacle Solder / Crimp, Flexible Cable Part Number 271-910-0630G 271-910-1070G Cable “A” DIM RG- 179 .93 BELDEN 8218 1.03 • See page 85 for cable assembly procedures: CAP 9-01 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/21 RDM 75 OHM: Straight Plug Solder / Crimp, Flexible Cable Part Number Cable “A” DIM 270-910-0630G RG- 179 .93 270-910-1070G BELDEN 8218 1.03 • See page 85 for cable assembly procedures: CAP 9-01 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 273-910-0630G 273-910-1070G Cable “A” DIM RG- 179 .49 BELDEN 8218 .60 • See page 86 for cable assembly procedures: CAP 9-02 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number Cable “A” DIM 272-910-0630G RG- 179 .49 272-910-1070G BELDEN 8218 .60 • See page 86 for cable assembly procedures: CAP 9-02 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM 75 OHM: Straight Receptacle Crimp / Crimp, Flexible Cable Part Number 241-910-0630G 241-910-1070G Cable “A” DIM RG- 179 .84 BELDEN 8218 1.00 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Plug Part Number 240-910-0630G 240-910-1070G Cable “A” DIM RG- 179 .86 BELDEN 8218 1.01 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn DS/22 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM 75 OHM: Straight Receptacle Printed Circuit Board Contacts Part Number 271-010-6140G Mounting Hole No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Plug Part Number 270-010-6140G Mounting Hole No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 273-010-6140G Mounting Hole No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 272-010-6140G Mounting Hole No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM 75 OHM: Receptacle / Receptacle Same - Series Adapters Part Number 271-271-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/23 RDM 75 OHM: Plug / Plug Same - Series Adapters Part Number 270-270-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Plug / Receptacle Part Number 270-271-0000G • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn DS/24 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM HIGH POWER: MECHANICAL: Specifications & Interface Dimensions ELECTRICAL: Current Rating: 10, 20, 40 AMPS Contact Resistance: 3.0 Milliohms Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies Receptacles: Beryllium Copper per ASTM B196 Spring Washers: Phosphor Bronze per ASTM B103 Clip Ring: Phosphor Bronze per ASTM B103 Finish: Bodies: Gold Plated per MIL-STD-45204 Clip Ring: Nickel Plated per QQ-N-290 ENVIRONMENTAL: Operating Temperature: -55ºC to +125ºC Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B MATING CHARACTERISTICS: Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / -.0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin Retention in Shell: 15 lbs. Minimum GENERAL INFORMATION: RDM Coaxial Contacts fit all D-Subminiature Connectors and are interchangeable with other manufacturer’s product. Available in crimp or solder cable terminations. Plug Interface Receptacle Interface Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/25 RDM HIGH POWER: Straight Receptacle Solder, Flexible Cable Part Number 221-510-0000G 221-510-0001G 221-510-0002G Wire Gauge #8 # 12 # 16 Current “A” DIM Rating 40 AMP .188 20 AMP .110 10 AMP .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Plug Part Number 220-510-0000G 220-510-0001G 220-510-0002G Wire Gauge Current Rating “A” DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number Wire Gauge 223-510-0000G # 8 223-510-0001G # 12 223-510-0002G # 16 Current “A” DIM Rating 40 AMP .188 20 AMP .110 10 AMP .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug .365 Part Number 222-510-0000G 222-510-0001G 222-510-0002G Wire Gauge Current Rating “A” DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM HIGH POWER: Straight Receptacle Crimp, Flexible Cable Part Number 221-910-0000G 221-910-0001G 221-910-0002G Wire Gauge #8 # 12 # 16 Current Rating 40 AMP 20 AMP 10 AMP “A” DIM .188 .110 .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn DS/26 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM HIGH POWER: Straight Plug Crimp, Flexible Cable Part Number 220-910-0000G 220-910-0001G 220-910-0002G Wire Gauge Current Rating “A” DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Receptacle Part Number 223-910-0000G 223-910-0001G 223-910-0002G Wire Gauge #8 # 12 # 16 Current Rating 40 AMP 20 AMP 10 AMP “A” DIM .188 .110 .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 222-910-0000G 222-910-0001G 222-910-0002G Wire Gauge Current Rating “A” DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” RDM HIGH VOLTAGE: Straight Plug Solder, Flexible Cable Part Number 230-510-0000H Wire Gauge # 16 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Straight Receptacle Part Number 231-510-0000H Wire Gauge # 16 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/27 RDM HIGH VOLTAGE: Right Angle Receptacle Solder, Flexible Cable Part Number 233-510-0000H Wire Gauge # 16 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Right Angle Plug Part Number 232-510-0000H Wire Gauge # 16 • Part number shown is for standard gold plating. • For military finish change suffix to “H” • For commercial finish change suffix to “C” Dimensions shown are in inches. Winchester/Retconn DS/28 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com 40 SERIES: MECHANICAL: Specifications & Interface Dimensions ELECTRICAL: Impedance: 50 Ohms Nominal Frequency Range: 0 to 5.0 GHz Insulation Resistance: 5000 Megaohms Minimum Contact Resistance: (Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 Voltage Standing Wave Ratio: 0 to 5.0 GHz Straight Connector: 1.15 +.02F GHz on RG-316 Cable Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-rigid Cable Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Beryllium Copper per ASTM B194 Finish: Body: Gold Plated per MIL-STD-45204 Center Contact: Gold Plated per MIL-STD-45204 Clip Ring: Nickel Plated per QQ-N-290 ENVIRONMENTAL: Operating Temperature: -55ºC to +125ºC Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Test Method 101, Condition B MATING CHARACTERISTICS: Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / -.0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin Plugs, Center Contact: 16 oz. Maximum on a .0410 +.0001 / -.0000 Dia. Pin and 5 oz. Minimum Withdrawl on a .0390 +.0000 / -.0001 Dia. Pin Retension in Shell: 15 lbs. Minimum GENERAL INFORMATION: 31 Series Coaxial Contacts fit housings per DIN 41612 Available in crimp or solder cable terminations Plug Interface Receptacle Interface Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/29 RDM 40 SERIES: Straight Plug Printed Circuit Board Contacts Part Number Mounting Hole 400-010-6040G No. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Straight Receptacle Part Number 401-010-6040G Mounting Hole No. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Plug Part Number 402-010-6040G Mounting Hole No. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Receptacle Part Number Mounting Hole 403-010-6040G No. 060A • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Straight Plug Part Number Mounting Hole 400-010-6140G No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn DS/30 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com RDM 40 SERIES: Straight Receptacle Printed Circuit Board Contacts Part Number Mounting Hole 401-010-6140G No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Plug Part Number Mounting Hole “A” DIM 402-010-6140G No. 061 .76 402-010-6141G No. 061 .86 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. Right Angle Receptacle Part Number Mounting Hole 403-010-6140G No. 061 • See page 78 for mounting hole layout. • Part number shown is for standard gold plating. RDM 40 SERIES: Straight Plug Crimp / Crimp, Flexible Cable Part Number 400-910-0630G 400-910-0631G 400-910-1160G 400-910-1161G Cable “A” DIM RG- 316, 188 .93 RG- 316, DS .93 RG- 141, 58 1.09 RG- 142, 223 1.09 “B”DIM .067 .067 .120 .120 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. Straight Receptacle Part Number 401-910-0630G 401-910-0631G 401-910-1160G 401-910-1161G Cable “A” DIM RG- 316, 188 .86 RG-316, DS .86 RG-141, 58 1.02 RG- 142, 223 1.02 “B”DIM .067 .067 .120 .120 • See page 87 for cable assembly procedures: CAP 9-07 • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/31 RDM 40 SERIES: Right Angle Plug Crimp / Crimp, Flexible Cable Part Number 402-910-0630G 402-910-0631G 402-910-1160G 402-910-1161G Cable “A” DIM RG- 316, 188 .75 RG- 316, DS .75 RG- 141, 58 .75 RG- 142, 223 .75 “B”DIM .067 .067 .120 .120 “C”DIM .50 .50 .60 .60 • See page 88 for cable assembly procedures: CAP 9-16 • Part number shown is for standard gold plating. Right Angle Receptacle Part Number 403-910-0630G 403-910-0631G 403-910-1160G 403-910-1161G Cable “A” DIM RG- 316, 188 .71 RG- 316, DS .71 RG- 141, 58 .71 RG- 142, 223 .71 “B”DIM .067 .067 .120 .120 “C”DIM .50 .50 .60 .60 • See page 88 for cable assembly procedures: CAP 9-16 • Part number shown is for standard gold plating. RDM 40 SERIES: Straight Plug Solder / Solder, Semi-Rigid Cable Part Number Cable “A” DIM 400-510-0850G RG- 405 (.085 SR) .79 400-510-1410G RG- 402 (.141 SR) .79 “B”DIM .090 .148 • See page 83 for cable assembly procedures: CAP 5-15 • Part number shown is for standard gold plating. Straight Receptacle Part Number Cable “A” DIM 401-510-0850G RG- 405 (.085 SR) .72 401-510-1410G RG- 402 (.141 SR) .72 “B”DIM .090 .148 • See page 83 for cable assembly procedures: CAP 5-15 • Part number shown is for standard gold plating. Right Angle Plug Part Number Cable “A” DIM 402-510-0850G RG- 405 (.085 SR) .75 402-510-1410G RG- 402 (.141 SR) .75 “B”DIM .090 .148 “C” DIM .31 .31 • See page 84 for cable assembly procedures: CAP 5-16 • Part number shown is for standard gold plating. Right Angle Receptacle Part Number Cable “A” DIM 403-510-0850G RG- 405 (.085 SR) .69 403-510-1410G RG- 402 (.141 SR) .69 “B”DIM “C” DIM .090 .31 .148 .31 • See page 84 for cable assembly procedures: CAP 5-16 • Part number shown is for standard gold plating. Dimensions shown are in inches. Winchester/Retconn DS/32 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE: Connector Ordering Guide Standard Housings 36 Example: RM2W7P-50-TD= 24W7 Male Housing, With Assembled Solder Cup Contacts, Tin Plated, With RFI Indents, And Standard Mounting Edgemount D-Subminiature Connectors (RM - 2000 Series) Note: Edgemount Coaxial Connectors are supplied installed in housing Example: RM5W5P-2010-20= 5W5 Male Edgemount Housing, Tin Plated, Without RFI Indents, With RDM 20 Series Coaxial Connectors, For Use In A .030” Thick PC Board. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/33 D-SUBMINIATURE CONNECTOR: Shell Size E 1W1 No. of size 8 contacts: 1 No. of size 20 contacts: 0 Selection Guide 5W1 No. of size 8 contacts: 1 No. of size 20 contacts: 4 2W2 No. of size 8 contacts: 2 No. of size 20 contacts: 0 3W3 No. of size 8 contacts: 3 No. of size 20 contacts: 0 Shell Size A 7W2 No. of size 8 contacts: 2 No. of size 20 contacts: 5 11W1 No. of size 8 contacts: 1 No. of size 20 contacts: 10 Shell Size B 4W4 No. of size 8 contacts: 4 No. of size 20 contacts: 0 5W5 No. of size 8 contacts: 5 No. of size 20 contacts: 0 9W4 No. of size 8 contacts: 4 No. of size 20 contacts: 5 13W3 No. of size 8 contacts: 3 No. of size 20 contacts: 10 17W2 No. of size 8 contacts: 2 No. of size 20 contacts: 15 21W1 No. of size 8 contacts: 1 No. of size 20 contacts: 20 Shell Size C 6W6 No. of size 8 contacts: 6 No. of size 20 contacts: 0 7W7 No. of size 8 contacts: 7 No. of size 20 contacts: 0 Winchester/Retconn DS/34 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTOR: Selection Guide Shell Size C (Continued) 8W8 No. of size 8 contacts: 8 No. of size 20 contacts: 0 13W6 No. of size 8 contacts: 6 No. of size 20 contacts: 7 17W5 No. of size 8 contacts: 5 No. of size 20 contacts: 12 21WA4 No. of size 8 contacts: 4 No. of size 20 contacts: 17 21W4 No. of size 8 contacts: 4 No. of size 20 contacts: 17 25W3 No. of size 8 contacts: 3 No. of size 20 contacts: 22 27W2 No. of size 8 contacts: 2 No. of size 20 contacts: 25 Shell Size D 24W7 No. of size 8 contacts: 7 No. of size 20 contacts: 17 36W4 No. of size 8 contacts: 4 No. of size 20 contacts: 32 43W2 No. of size 8 contacts: 2 No. of size 20 contacts: 41 47W1 No. of size 8 contacts: 1 No. of size 20 contacts: 46 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/35 D-SUBMINIATURE: PCB Signal Contact Selection D-SUBMINIATURE: 0 - Standard Mounting Options 2 - Float Mount Bushings 1 - 4-40 Clinch Nuts 6 - Swaged Stand-Offs 7- Swaged Stand-Offs With Guide Pins • See page 40 for right angle mounting dimensions Dimensions shown are in inches. Winchester/Retconn DS/36 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE: Guide Pin Plates Male Female Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/37 D-SUBMINIATURE: Shell Dimensions Plug Shell Receptacle Shell Rear Shell (Plug & Receptacle) Securing Methods Roll Over Tabs Rivet GENDER: P: Plug (Pin Signal Contacts) R: Receptacle (Socket Signal Contacts) Dimensions shown are in inches. Winchester/Retconn DS/38 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE: Edgemount Connectors (Patent Information Pending) See page 33 for part number selection. PC BOARD FOOTPRINTS (male footprint shown • female footprint is mirror image) Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/39 D-SUBMINIATURE: Right Angle Power Contacts Right Angle Mounting Dimensions Right Angle Coaxial Contacts Dimensions shown are in inches. Winchester/Retconn DS/40 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Viewed from component side of PCB. Male footprint shown. Female footprint mirrored. 2W2 Straight Coax Contacts 3W3 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint mirrored. Viewed from component side of PCB. Male footprint shown. Female footprint mirrored. 4W4 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint mirrored. 5W5 Straight Coax Contacts Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/41 D-SUBMINIATURE CONNECTORS: Footprints 6W6 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. 7W7 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. 8W8 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 5W1 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/42 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 7W2 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 11W1 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 9W4 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 13W3 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/43 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 17W2 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 21W1 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 13W6 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/44 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 17W5 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 21WA4 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/45 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 21W4 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 25W3 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/46 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 27W2 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 24W7 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/47 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 36W4 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 43W2 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/48 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. 47W1 Straight Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/49 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 2W2 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 3W3 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 4W4 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 5W5 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/50 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTOR: Footprints Mating Face of Connector 6W6 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 7W7 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 8W8 Right Angle Coax Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 5W1 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/51 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 7W2 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 11W1 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 9W4 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 13W3 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/52 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: 17W2 Right Angle Coax Contacts Footprints Mating Face of Connector Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 21W1 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 13W6 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 17W5 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Winchester/Retconn Dimensions shown are in inches. DS/53 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 21WA4 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 21W4 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/54 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 25W3 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 27W2 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950• Internet: http://www.litton-wed.com DS/55 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 24W7 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 36W4 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/56 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 43W2 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 47W1 Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 “D” DIM. .055 MIN. .045 MIN. .040 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/57 D-SUBMINIATURE CONNECTORS: Footprints Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 2W2 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 3W3 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 4W4 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 5W5 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/58 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 6W6 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 7W7 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. 8W8 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/59 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 5W1 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 7W2 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 11W1 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 9W4 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/60 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 13W3 Straight Power Contacts Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 17W2 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 21W1 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/61 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 13W6 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 17W5 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 21WA4 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/62 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 21W4 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 25W3 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/63 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 27W2 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 24W7 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/64 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 36W4 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 43W2 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/65 D-SUBMINIATURE CONNECTORS: Footprints Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 47W1 Straight Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/66 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 2W2 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 3W3 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 4W4 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 5W5 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/67 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 6W6 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 7W7 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 8W8 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/68 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. 5W1 Right Angle Power Contacts Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 7W2 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 11W1 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/69 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 9W4 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 13W3 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/70 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTOR: Footprints Mating Face of Connector 17W2 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 21W1 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 13W6 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/71 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 17W5 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 21WA4 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/72 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D- SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 21W4 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 25W3 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/73 D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 27W2 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 24W7 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/74 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com D-SUBMINIATURE CONNECTORS: Footprints Mating Face of Connector 36W4 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector 43W2 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/75 D-SUBMINIATURE CONNECORS: Footprints Mating Face of Connector 47W1 Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 “D”DIM. .055 MIN. .045 MIN. .040 MIN. Power Contact Dia. “P”DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches. Winchester/Retconn DS/76 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com CABLE REFERENCE TABLE CABLE RG-402 RG-405 CENTER CONDUCTOR .0359 .0201 O.D. DIELECTRIC .1175 .0658 O.D. JACKET .141 .086 IMPEDANCE (Ohms) 50 50 CABLE RG-8A/U RG-9B/U RG-55 RG-58 RG-58A RG-59 RG-62 RG-62A RG-71 RG-140 RG-141 RG-141A RG-142 RG-174 RG-178 RG-179 RG-179B/U RG-180 RG-187 RG-187A/U RG-188 RG-188A/U RG-195 RG-196 RG-210/U RG-213/U RG-214/U RG-223 RG-303 RG-316 RG-316 DS CENTER CONDUCTOR .0285 .0285 .032 .038 .0071 .023 .025 .0253 .025 .025 .039 .0390 .039 .019 .012 .012 .0040 .012 .012 .0040 .020 .0067 .012 .012 .0253 .0296 .0296 .032 .039 .020 .020 O.D. DIELECTRIC .285 .280 .116 .116 .116 .146 .146 .146 .146 .146 .116 .116 .116 .060 .034 .060 .063 .102 .060 .060 .060 .060 .102 .034 .146 .285 .285 .116 .116 .060 .060 O.D. SHIELD .176 .150 .191 .191 .208 .176 .146 .171 .080 .054 .084 .124 .084 .081 .124 .054 .176 .146 .081 .102 O.D. JACKET .405 .420 .176 .150 .195 .191 .191 .242 .208 .176 .146 .190 .171 .080 .054 .084 .100 .124 .084 .11 .081 .110 .124 .054 .242 .405 .425 .176 .146 .081 .102 IMPEDANCE (Ohms) 50 50 50 50 50 75 93 93 93 75 50 50 50 50 50 75 75 95 75 75 50 50 95 50 93 50 50 50 50 50 50 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/77 MOUNTING HOLE LAYOUTS Number 060 A Number 060 B Number 060 C Number 065 Number 066 Dimensions shown are in inches. Winchester/Retconn DS/78 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com CABLE ASSEMBLY PROCEDURES: 5-07 Part Numbers “A” Dim “B” Dim 200-510-0360G 201-510-0360G 1/4 5/16 200-510-0362G 201-510-0362G 9/32 7/32 200-510-0630G 201-510-0630G 1/4 5/16 200-510-1070G 201-510-1070G 5/16 3/8 200-510-1160G 201-510-1160G 5/16 3/8 “C” Dim 5/64 5/64 5/64 5/64 5/64 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/79 CABLE ASSEMBLY PROCEDURES: 5-08 Part Numbers “A” Dim “B” Dim 202-510-0360G 203-510-0360G 15/64 3/8 202-510-0630G 203-510-0630G 15/64 3/8 202-510-1070G 203-510-1070G 5/16 27/64 202-510-1160G 203-510-1160G 5/16 27/64 “C” Dim 1/16 1/16 3/32 3/32 Winchester/Retconn DS/80 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com CABLE ASSEMBLY PROCEDURES: 5-09 Part Numbers “A” Dim “B” Dim 200-510-0850G 201-510-0360G 5/32 5/64 200-510-1410G 201-510-0630G 7/64 5/64 210-510-0850G 211-510-1070G 5/32 5/64 210-510-1410G 211-510-1160G 7/64 5/64 270-510-0850G 271-510-0850G 5/32 5/64 270-510-0850G 271-510-1410G 7/64 5/64 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/81 CABLE ASSEMBLY PROCEDURES: 5-10 Part Numbers “A” Dim “B” Dim 202-510-0360G 203-510-0360G 5/32 3/32 202-510-0630G 203-510-0630G 7/64 3/32 212-510-1070G 203-510-1070G 5/32 3/32 212-510-1160G 203-510-1160G 7/64 3/32 272-510-0850G 273-510-0850G 5/32 3/32 272-510-1410G 273-510-1410G 7/64 3/32 Winchester/Retconn DS/82 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com CABLE ASSEMBLY PROCEDURES: 5-15 Part Numbers “A” Dim 310-510-0850G 311-510-0850G .020 310-510-1410G 311-510-1410G .025 400-510-0850G 401-510-0850G .020 400-510-1410G 401-510-1410G .025 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/83 CABLE ASSEMBLY PROCEDURES: 5-16 Winchester/Retconn DS/84 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com CABLE ASSEMBLY PROCEDURES: 9-01 Part Numbers “A” Dim “B” Dim 200-910-0360G 201-910-0360G 1/4 5/16 200-910-0630G 201-910-0630G 1/4 5/16 200-910-1070G 201-910-1070G 5/16 3/8 200-910-1160G 201-910-1160G 5/16 3/8 “C” Dim 5/64 5/64 5/64 5/64 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/85 CABLE ASSEMBLY PROCEDURES: 9-02 Part Numbers “A” Dim “B” Dim 202-910-0360G 203-910-0360G 15/64 3/8 202-910-0630G 203-910-0630G 15/64 3/8 202-910-1070G 203-910-1070G 5/16 27/64 202-910-1160G 203-910-1160G 5/16 27/64 “C” Dim 1/16 1/16 3/32 3/32 Winchester/Retconn DS/86 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com CABLE ASSEMBLY PROCEDURES: 9-07 Part Numbers 240-910-0630G 240-910-1070G 260-910-0630G 260-910-1160G 260-910-1161G 290-910-0630G 290-910-1160G 290-910-1161G 241-910-0630G 241-910-1070G 261-910-0630G 261-910-1160G 261-910-1161G 291-910-0630G 291-910-1160G 291-910-1161G Center Contact Only Crimp Tool Positioner Setting T2400 P0630 4 T2400 P0630 4 T2400 P0630 4 T2400 P0630 7 T2400 P0630 7 T2400 P0630 4 T2400 P0630 7 T2400 P0630 7 Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/87 CABLE ASSEMBLY PROCEDURES: 9-16 Part Numbers “A” Dim “B” Dim 312-910-0630G 313-910-0630G .234 .312 312-910-0631G 313-910-0631G .234 .312 312-910-1160G 313-910-1160G .312 .375 312-910-1161G 313-910-1161G .312 .375 Ferrule Hex. Size .128 .151 .213 .213 Dimensions shown are in inches. Winchester/Retconn DS/88 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com Connector Tools Crimp Tool (For HEX Dies) Part Number T-1001 Die Set Part Number T-1001-2 T-1001-3 T-1001-5 A HEX Length B HEX Length .128 .325 .105 .325 .213 .325 .178 .325 .314 .400 .155 .400 Note: To be used with crimp tool (T-1001) Center Contact Crimping Tool Part Number T-2400 Positioner Part Number P0630 Note: To be used with center contact crimping tool (T-2400) Dimensions shown are in inches. Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/89 Connector Tools Contact Withdrawl Tool Part Number T-1000 Tool For Inserting Stabilizing Ring Into Housing Part Number T-1004 Insertion Tool Coax Contacts Part Number T-1003 Dimensions shown are in inches. Winchester/Retconn DS/90 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com Other Product Offerings Winchester/Retconn 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com DS/91 Other Product Offerings Our Products are limited only by your imagination Winchester/Retconn DS/92 400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com Winchester/Retconn RDM COMBINATION D-SUBMINIATURE CONNECTORS Re-order Number: CAT-COMBO-D2000