84137080

SIMM Series Input Modules * 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 Part numbers 84145061 84145062 24Vac/dc 19.2-30Vac/dc 20 mA 30Vac/36Vdc 50 mA -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz SPDT 84145064 120 95-121Vac/dc 5 mA 30Vac/36Vdc 50 mA 84145066 240 195-253Vac/dc 5 mA 30Vac/36Vdc 50 mA 84145071 5 - 28 19.2-30Vac/dc 20 mA 30Vac/36Vdc 50 mA -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz SPST (N.O.) Input Characteristics (at ambient 25 C°) Nominal voltage Operating voltage range Max input current 24Vac/dc 19.2-30Vac/dc 20 mA 30Vac/36Vdc 50 mA -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz SPDT Output characteristics (at ambient 25 C°) Max Voltage Max current General characteristics Operating temperature range Storage temperature range Turn-On time Turn-Off time Switching frequency Mechanical Life (operations) Electrical Life (number of operation) Weight Contact Material Contact Arrangement -25 to 60°C -25 to 60°C -40 to 80°C -40 to 80°C 8 ms 8 ms 10 ms 10 ms 10 Hz 10 Hz > 10 x 106 > 10 x 106 6 x 106 6 x 106 1.23 oz 1.23 oz AgSnO2 gold plated SPDT SPDT Note: Exceeding the value given for the output relay current will remove the gold plating from the contacts and therefore we cannot guarantee correct operation at low currents. Dimensions: SPDT SPST Wiring Diagram and Thermal Curves: 84145061 / 062 / 064 / 066 Accessories 84145050 Front Panel marker ( 88 per bag ) 84145052 10 postion jumper - Blue 84145071 84145051 2 Pole "Common" Jumper 84145053 10 postion jumper - Red Products and specifications subject to change without notice. Consult factory for applications assistance. www.crouzet-usa.com SIMM Series Output Modules * 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 Part numbers 84145001 84145004 110Vac/dc 70-130Vac/dc 7 mA 30Vac/dc 5-48Vdc 0.5A Transistor -20 to 60°C -40 to 80°C 30 ms 20 ms 10 Hz 1.13 oz 84145021 24Vdc 10-44Vdc 6mA 3Vdc 24-250Vac 0.5A Triac -20 to 60°C -40 to 80°C 10 ms 10 ms 20 Hz 1.13 oz 84145005 230Vac 90-230Vac 8.5 mA 40Vac 5-48Vdc 0.5A Transistor -20 to 60°C -40 to 80°C 45 ms 15 ms 10 Hz 1.13 oz 84145024 110Vac/dc 70-130Vac/dc 6mA 35Vac/dc 24-250Vac 0.5A Triac -20 to 60°C -40 to 80°C 10 ms 10 ms 20 Hz 1.13 oz 84145010 5Vdc 4-5.5Vdc 6 mA 2Vdc 5-48Vdc 2A Transistor -20 to 60°C -40 to 80°C 1 ms 5 ms 10 Hz 1.06 oz 84145025 230Vac 140-250Vac 7mA 80Vac 24-250Vac 0.5A Triac -20 to 60°C -40 to 80°C 10 ms 10 ms 20 Hz 1.13 oz 84145011 24Vdc 10-44Vdc 6 mA 3Vdc 5-48Vdc 2A Transistor -20 to 60°C -40 to 80°C 1 ms 5 ms 10 Hz 1.06 oz 84145031 24Vdc 10-44Vdc 6 mA 3Vdc 24-250Vac 1A Triac -20 to 60°C -40 to 80°C 8.33 ms 8.33 ms 20 Hz .95 oz 84145015 230Vac 90-230Vac 7mA 40Vac 5-48Vdc 2A Transistor -20 to 60°C -40 to 80°C 1 ms 10 ms 10 Hz 1.06 oz Input Characteristics (at ambient 25 C°) Nominal voltage Operating voltage range Max input current Drop out voltage 24Vdc 10-44Vdc 6 mA 5Vdc 5-48Vdc 0.5A Transistor -20 to 60°C -40 to 80°C 20 us 100 us 1k Hz 1.13 oz 84145020 Output Characteristics (at ambient 25 C°) Operating voltage range Max current Output Type General Characteristics Operating temperature range Storage temperature range Turn-On time Turn-Off time Switching frequency Weight Part numbers Input Characteristics (at ambient 25 C°) Nominal voltage Operating voltage range Max input current Drop out voltage 5Vdc 4-6.2Vdc 6mA 2Vdc 24-250Vac 0.5A Triac -20 to 60°C -40 to 80°C 10 ms 10 ms 20 Hz 1.13 oz 84145001 / 004 / 005 84145020 / 021 / 024 / 025 Output Characteristics (at ambient 25 C°) Operating voltage range Max current Output Type General Characteristics Operating temperature range Storage temperature range Turn-On time Turn-Off time Switching frequency Weight Derating Curves: 84145001 / 004 / 005 84145010 / 011 / 015 Dimensions: Solid State Output: 84145010 / 011 / 015 84145020 / 021 / 024 / 025 84145031 84145031 Products and specifications subject to change without notice. Consult factory for applications. www.crouzet-usa.com SIMM Series Output Modules * 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 Part numbers 84145041 84145042 24Vac/dc 19.2-30Vac/dc 20 mA 1-250Vac 6A -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz SPDT 84145043 110Vac/dc 95-125Vac/dc 5 mA 1-250Vac 6A -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz AgSnO2 SPDT 84145046 230Vac 195-253Vac/dc 6 1-250Vac 6A -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz SPDT Input Characteristics (at ambient 25 C°) Nominal voltage Operating voltage range Max input current 24Vdc 19.2-30Vdc 20 mA 1-250Vac 6A -25 to 60°C -40 to 80°C 8 ms 10 ms 10 Hz > 10 x 106 6 x 106 1.23 oz SPDT Output Characteristics (at ambient 25 C°) Operating voltage range Max current General Characteristics Operating temperature range Storage temperature range Turn-On time Turn-Off time Switching frequency Mechanical Life (operations) Electrical Life (number of operation) Weight Contact Material Contact Arrangement Dimensions: Relay Output: Wiring Diagram and Thermal Curves: 84145041 / 042 / 043 / 046 Accessories 84145050 Front Panel marker ( 88 per bag ) 84145052 10 postion jumper - Blue 84145051 2 Pole "Common" Jumper 84145053 10 postion jumper - Red Products and specifications subject to change without notice. Consult factory for applications. www.crouzet-usa.com Hybrid power relays - RHP s s s s 20 A in a case only 17.5 mm wide Service life > 5 million operations at full load Silent operation Functions: contactor – impulse relay – day/night contactor s Clips onto a 35 mm DIN rail s UL/©UL (listed) approval pending s NF-USE label pending s “CE” / Low Voltage Directive conformity Operating principles Contactor The contactor output is closed when the control voltage is present at the control input terminals. The contactor output is open when there is no voltage at the control input terminals. The LED is lit when the output is active. Impulse relay The impulse relay output changes state on each impulse at the control input terminals, and remains in that state between each impulse. The output changes state on the rising edge of the control state change. The pushbutton on the front can be used to select an operating mode: Automatic (LED lit): Impulse relay function (Auto) Forced operation (LED flashing): output closed (ON) Stop (LED not lit): output open (OFF) Day/night contactor The contactor output is closed when the control voltage is present at the control input terminals. The contactor output is open when there is no voltage at the control input terminals. The pushbutton on the front can be used to select an operating mode: Automatic (LED lit): Day/night contactor function (Auto) Forced operation (LED flashing): output closed (ON) When the control changes state, the day/night contactor reverts to automatic mode. Stop (LED not lit): output open (OFF) Conformity with standards IEC/EN 60947-4-3 (industrial environment) IEC/EN 60669-2-1 (domestic environment) IEC/EN 60601-1 (medical environment) IEC/EN 60947-7-1 (connection for industrial env.) IEC/EN 60998-2-1 (connection for domestic env.) Insulation coordination: Installation category: 3 Degree of pollution: 3 According to IEC 60664-1: 4KV/3 Breakdown voltage according to IEC/EN60669-2-1: 2 KV/1Min / 1mA / 50 Hz Insulation resistance according to IEC/EN60669-2-1: > 5MΩ/500VDC / 1Min Vibrations according to IEC/EN60068-2-6: frequencies: 10 to 55Hz amplitude: 0.35 mm Part numbers (and voltages) Contactor control a Contactor control c Impulse relay control a Day/night contactor control c 84 138 001 84 138 000 84 138 101 84 138 201 0…32 V c 0 to 1 V c 4 to 32 V c 50 ms 1 Input characteristics Voltage Frequency Thresh- OFF control olds ON control Minimum duration of the control 90…260 V a 50 / 60 Hz 0 to 46 V a 76 to 260 V a 50 ms Output characteristics Voltage Max. current Overload current 20 A Min. current Frequency Contact Number of operations Leakage current Acoustic in steady state noise on switching Terminal block clamping capacity: Terminal tightening torque Operating temperature Storage temperature Relative humidity Casing material Degree of protection (according to IEC 60529) Weight (g) 90…260 V a 20 A in AC1 / AC51 / AC7a AC-51 : 1,25 x Ie – 60s : 50 - 30 (IEC 60947-4-3) 100 mA in AC1 / AC51 / AC7a 50 / 60 Hz N.O. > 5 000 000 < 5 mA < 35 dB at 1 m < 50 dB at 0.5 m 2 x 1.5 mm2 with ferrule 2 x 2.5 mm2 without ferrule 1 x 4 mm2 without ferrule 1 Nm max. M3 screw (IEC60947-1) -5 °C to +55 °C -40 °C to +85 °C 90 to 95 % without condensation Self-extinguishing IP 50 casing IP 20 terminal block 70 approx. 4 Connection 1 3 A1 NI 13 IN 13 A1 90... 260V 24 A2 A1 90…260 V a/4…32 V c 24 LOAD A2 2 4 A2 Dimensions 81 18 45 44 60 5,5 17,5 To order, specify: Standard products Part number Example : Solid state relays - RHP - 84 138 001 1 4/8 Two-phase (dual) solid state relays - GD range Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s s s For controlling three-phase supplies Controls two or three phases of the supply Applied to star or delta-connected two-phase resistances with neutral not connected Rating 25 A and 40 A Output voltages from 24 to 280 V and 36 to 530 V Back-to-back SCRs Zero voltage switching Input to output insulation voltage: 4000 V Protection by RC filter UL - cUL approval and CE marking Part numbers 24-280 600 25 7 100 250 67 1.6 260 1.5 500 47-63 > 0.5 24-280 600 40 7 100 500 145 1.6 1260 0.25 500 47-63 > 0.5 36-530 1200 40 7 100 500 135 1.6 1260 0.25 500 47-63 > 0.5 Two-phase relays 25 A Switching Output voltage Zero voltage 24 - 280 V a Instantaneous 24 - 280 V a Two-phase relays 40 A Switching Output voltage Zero voltage 24 - 280 V a Instantaneous 24 - 280 V a Zero voltage 36 - 530 V a Instantaneous 36 - 530 V a Zero voltage 24 - 280 V a Instantaneous 24 - 280 V a Zero voltage 36 - 530 V a Instantaneous 36 - 530 V a Zero voltage 24 - 280 V a Instantaneous 24 - 280 V a Zero voltage 36 - 530 V a Instantaneous 36 - 530 V a Heatsinks Heat transfer compound DIN rail adaptor Quick-blow fuses Thermal dissipation curves 25 A 25 Output specifications Voltage range (Vrms max) Peak voltage (t=1 min.) (Vpeak) Maximum current (Vpeak) Maximum current(mArms) Minimum current (mArms) Max. 1-cycle surge T=25°C (A peak) Max. 1-second surge T=25°C (A peak) On-state voltage drop at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s Thermal resistance Junction to casing (°C/W) Static (off-state) dv/dt (Vµs) Supply frequency range (Hz) cos ϕ (Zero voltage) 1 Input voltage 4 - 15 V c 4 - 15 V c Input voltage 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c 4 - 15 V c Connection diagram B B Connection diagram D D D D C C C C B B A A 84 130 210 84 130 211 Input specifications Input voltage(V) Drop-out voltage (V c) Maximum current (at Vmax) (mA) Response time (close) Zero voltage switching (ms) Instantaneous switching (ms) Response time (open) Zero voltage switching (ms) Instantaneous switching (ms) 4-15 c 1 32 10 0,1 10 10 - 84 130 230 84 130 231 84 130 240 84 130 241 84 130 250 84 130 251 84 130 260 84 130 261 84 130 270 84 130 271 84 130 280 84 130 281 Accessories (see catalogue pages 4/30 to 4/32) 18 373 112 26 532 764 2 Characteristics Operating temperature (°C) Storage temperature (°C) Input to output insulation voltage (Vrms) Breakdown voltage (Vrms) Input/output capacitance (pF) Material Casing Baseplate Weight (g) Equivalent circuits -20 à +80 -40 à +100 4000 2500 8 5 Self-extinguishing (UL 94 V0) Aluminium 450 4 0, 5 20 15 2° C/W 5 °C /W 1 °C /W °C /W 5 10 5 0 0 10 20 25 30 40 50 60 70 80 °C 40 A 40 0,5 + A1 35 /W °C C 1° 30 1,5 /W + A2 °C 25 20 /W 2° C/ W B1 15 10 5° C /W - B2 5 0 0 10 20 25 30 40 50 60 70 80 °C To order, specify: Standard products 1 Standard products, non stocked Part number 2 Accessory Exemple: Two-phase solid state relay 25 A 84 130 210 - DIN rail adaptor 26 532 764 4/23 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com 57,2 43,4 22,2 25,6 19 4,8 57,2 47,6 4 D 19,5 34,7 44,5 A Dimensions OUTPUTA 44,5 27,9 OUTPUTB 2 2 ,2 Ø4,7 32,5 18 4,8 Ø 4 ,5 44 R6 ,7 2 3, 2 25,6 B 27,9 19 57,2 47,6 30 4,8 22,2 44,5 29,7 24,4 12,2 Two-phase (dual) solid state relays - GD range 4/24 32,5 Ø4,7 6,35 15,7 C 57,2 47,6 18,3 44,5 28,6 OUTPUT B OUTPUT A 22,2 8,4 25,6 32,5 28,8 Ø4,7 Ø 4,8 5 46,5 Solid state relays GD two-phase (dual) relay For accessories see page 4/10 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s s s For controlling three-phase supplies Controls two or three phases of the supply Used on star or delta-connected two-phase resistors with neutral not connected Rating 25 A Output voltages from 24 to 280 V Back-to-back SCRs Zero voltage switching Input to output insulation voltage : 4000 V Protection by RC filter UL/CSA and CE approved Output voltages 24 24 24 24 • • • • 280 V 280 V 280 V 280 V a a a a To order Versions Zero voltage switching Instantaneous switching Zero voltage switching Instantaneous switching Thermal curves ms Rating 25 25 40 40 A A A A Input voltages 4 4 4 4 • • • • 15 V 15 V 15 V 15 V c c c c Peak voltages 600 V 600 V 600 V 600 V Part number 84 84 84 84 130 130 130 130 210 211 230 231 Dimensions 44,5 25,4 4,8 22,2 3 10 25 1 20 2° C/W °C 5 0, °C /W /W 10 5 5 °C /W 14 57,2 47,6 15 1 5,8 2,3 27,9 Ø4,7 0 7,6 Accessories for solid state relays Heatsinks To order Range 1 phase 1 phase 3 phases or 2 x 1 phase 1 phase G, GA5, GT, GF Material : black anodised G, GA5, GT, GF Material : black anodised 2 x G, GA5, GT, GF 1 x GA0, GA3 Material : black anodised G, GA5, GT, GF, GN Material : black anodised Thermal resistance 2 °C/W aluminium 3 °C/W aluminium 0.7 °C/W aluminium 2 °C/W aluminium 15,2 24,1 0 10 20 25 30 40 50 60 70 80 °C Length L = 70 mm L = 58 mm L = 75 mm Weight 260 g 250 g 655 g Part number 26 532 760 26 532 761 26 532 762 L = 50 mm 150 g 26 532 758 Adaptors for panel mounting (lot of 4) For heatsink 26 532 760 26 532 758 26 532 761 26 532 762 26 532 758 47,6 26 532 801 26 532 801 3,8 4 x 10,35 7,3 ±0,15 4,4 ±0,2 10 40 41 67,5 10,5 55 24 10 17 10 66 20 M4 76,2 50 112 87 For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 9 Accessories for solid state relays (continued) DIN rail adaptor Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com 2 x M4 65 47,6 Protective covers 6,35 Ø 3,9 38,48 38,48 3 51,94 8,7 8,89 R 7,62 22 51,94 44 To order R 6,35 To order 6,35 Characteristics Suitable for use with heatsinks 26 532 760, 26 532 761 and 26 532 762 Weight 55 g Part number 26 532 764 21,59 27,34 73,4 1,78 27,34 Material polycarbonate UL 94 V0 Fits GA3 range Part number 26 532 796 Heat transfer compound To order 11,43 38,48 38,48 Ø 3,9 51,94 30,6 29,59 8,89 R 7,62 51,94 R 6,35 3 Material silicon/zinc oxide paste Weight 20 g Part number 18 373 112 To order 6,35 28,57 29,54 73,4 21,59 1,78 1 Thermal interfaces Material polycarbonate UL 94 V0 Fits GA0 range Part number 26 532 797 11,43 To order Thermstrate® thermal interface pads Characteristics - For G, GA5, GF and GT ranges - For the 3-phase GA0 range and the GA3 range Part number 26 532 720 26 532 721 Ø4 13,34 36,83 36,83 30,73 To order 18,54 Solid state relay protection 25,40 13,34 26,67 Material Weight Part number 26 532 798 polycarbonate UL 94 V0 5 g 24,13 24,13 Fits G, GA5, GF and GT ranges To order Type Varistor GA5 - G (24 - 280 V GA3 - G (36 - 530 V and 48 - 660 V a) GA0 a Part number ) In lots of 10 In lots of 10 Single 26 532 740 26 532 741 26 532 742 a Fuses for GMS relays GMS 3 A and C 4 GMS 5 A In lots of 10 In lots of 10 26 532 730 26 532 731 For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 10 Solid state relays G range Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com For accessories see page 4/9 and 4/10 For dimensions see page 4/8 s s s s s s s s s Current from 10 to 90 A Output voltages from 24 to 660 V~ Back-to-back SCRs Input voltage 90-280 V a c or 3-32 V c Peak voltage up to 1200 V Zero voltage or instantaneous switching Input to output insulation voltage: 4000 V Protection by RC filter UL recognised and CSA approved Output voltages 24 • 280 V 36 24 24 36 24 • • • • • 530 V 280 V 280 V 530 V 280 V a To order Version Zero voltage switching Rating 10 A Input voltages 3 • 32 V c 90 • 280 V a c 3 • 32 V c 3 • 32 V c 90 • 280 V a c 3 • 32 V c 3 • 32 V c 90 • 280 V a c 3 • 32 V c 90 • 280 V a c 3 • 32 V c 3 • 32 V c 90 • 280 V a c 3 • 32 V c 3 • 32 V c Peak voltages 600 V 600 V 1200 V 600 V 600 V 1200 V 600 V 600 V 1200 V 1200 V 1200 V 600 V 600 V 1200 V 1200 V Part number 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 060 060 060 060 060 060 060 060 060 060 060 060 060 060 060 231 233 241 431 433 441 631 633 741 743 751 831 833 841 941 a a a a a 25 A 45 A 50 A 36 • 530 V 48 • 660 V 24 • 280 V 36 • 530 V 36 • 530 V a 1 Thermal curves G range, 24 • 280 V 20 16 12 8 4 a a a 75 A a a 90 A 10 A 1° C G range, 36 • 530 V Baseplate temperature °C 2° a 10 A Baseplate temperature °C G range, 24 • 280 V 30 a 25 A 1° C /W Dissipated power (W) Dissipated power (W) C 6°C / W 7°C / W 8°C / W 10°C / W /W 5°C /W 15 5° 10° 3° C/ W 100 105 110 115 120 C Dissipated power (W) 4° 3° C C /W /W 95 /W 100 10 C/ 20 4° C 3° C W /W /W 20°C /W No hea 110 tsin k 10 No heat sink 5 120 0 3 6 9 12 10 20 30 40 50 60 70 80 0 2 4 6 8 10 10 20 30 40 50 60 70 80 0 5 10 15 20 10 20 30 40 50 60 70 80 On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) G range, 36 • 530 V Dissipated power (W) 30 25 20 15 10 5 a , 48 • 660 V a 25 A Baseplate temperature °C 1° C G range, 24 • 280 V 55 a 45 A Baseplate temperature °C 0, C 5° G range, 36 • 530 V 80 a , 48 • 660 V a 50 A Baseplate temperature °C 70 /W Dissipated power (W) Dissipated power (W) 50 45 40 35 30 25 20 15 10 5 0 5 10 15 20 25 30 35 40 3° C /W 2° C /W C 1° 2° C /W 80 90 100 60 1° C /W 3°C /W 5°C 40 /W 2°C /W No h eatsin k 110 120 20 0 5 10 15 20 10 20 30 40 50 60 70 80 10 20 30 40 50 60 70 80 0 5 10 15 20 25 30 35 40 45 10 20 30 40 50 60 70 80 On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) G range, 75 A Dissipated power (W) Dissipated power (W) 100 80 1° C G range, 90 A Baseplate temperature °C Baseplate temperature °C 135 125 115 105 95 85 75 65 55 45 35 25 15 5 0 10 20 30 40 50 60 70 80 ° 0,5 C/ 112 60 40 20 2°C /W 1° C /W /W 2°C 1°C /W /W 0 5 15 25 35 45 55 65 10 20 30 40 50 60 70 80 10 20 30 40 50 60 70 80 On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 6 Baseplate temperature °C /W C 2° /W 5 0, /W /W °C /W 0,5 W °C /W Solid state relays GA5 range For accessories see page 4/9 and 4/10 For dimensions see page 4/8 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s TRIAC low-cost solid state relay Input voltage 3-32 V c or 90-280 V a c Peak voltage: 600 V UL/CSA approved Certain models are VDE approved Input to output insulation voltage: 4000 V Protection by RC filter Output voltages 24 • 280 V 24 • 280 V a To order Versions Zero voltage switching Zero voltage switching Faston tag connectors Zero voltage switching EMC level 3 Thermal dissipation curves GA5 range - 10 A Rating 10 A 25 A Input voltages 3 • 32 V c 90 • 280 V a c 3 • 32 V c 90 • 280 V a c 3 • 32 V c 90 • 280 V a c 3 • 32 V c 90 • 280 V a c Peak voltages 600 V 600 V 600 V 600 V 600 V 600 V 600 V 600 V Part number 84 84 84 84 84 84 84 84 061 061 061 061 061 061 131 131 231 233 431 433 531 631 900 910 a 10 25 10 25 A A A A 24 24 24 24 • • • • 280 V 280 V 280 V 280 V a a a a GA5 range - 25 A Baseplate temperature °C 30 Dissipated power (W) Dissipated power (W) 12 9 6 3 7° 10° 8°C C 5° 6° C / C W /W /W 92 98 105 112 °2 °3 °C 25 20 15 10 5 °4 °C /W C/ /W °C /W /W W 20°C /W No h eatsin k 119 0 2 4 6 8 10 10 20 30 40 50 60 70 80 0 5 10 15 20 10 20 30 40 50 60 70 80 On-state current (A) Ambient temperature °C On-state current (A) Ambient temperature °C GAO range three-phase motor reversing relay For accessories see page 4/9 and 4/10 s s s s s s s s s Reverses rotation of three-phase motors Output voltage 24-480 V~ Input voltage 3-32 V c Reversal delay : 100ms Interlock against simultaneous actuation in both directions Back-to-back SCRs Input to output insulation voltage: 5000 V a Protected by RC filter and overvoltage limiter Direction of rotation displayed by 2 green LEDS Output voltage 24 • 480 V a Baseplate temperature °C 1 35 2°C /W 3° C 4° C /W /W To order Rating 25 A Thermal curves GAO range - 25 A Input voltage 3 • 32 V Dimensions (General tolerances ± 0.5) 61 c Part number 84 067 441 104 81 Baseplate temperature °C 0,5 Dissipated power (W) 50 40 30 20 10 2° C 1° °C 7 /W 41 21 7,62 4 M4 screws C /W 8 9 /W 1 1 1 5,3 L1 U L2 V 47,6 73,5 3° C /W No heatsink A1F 12,1 A2 A1R 0 5 10 15 20 25 10 20 30 40 50 60 70 80 92 On-state current (A) Ambient temperature (° C) 6,35 3 M3.5 screws 18,5 22,6 For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 4 Solid state relays GF range Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com For accessories see page 4/9 and 4/10 For dimensions see below s s s s s s Rating 10 A 15 A 30 A Thermal curve GF range - 10 A Dissipated power (W) 12 10 8 6 4 2 150 0 2 4 6 8 10 10 20 30 40 50 60 70 80 5°C 10°C Solid state relay for DC applications FET output - 10 A, 15 A, 30 A Very low leakage current ( 0.5 4.9 - 3.6° C/W Output specifications Voltage range (Vrms max) Peak voltage (t=1 min.) (Vpeak) Maximum current (A) Maximum off-state leakage (at Vmax and T = 25 °C) Minimum current (mArms) Max. 1-cycle surge T=25°C (A peak) Max. 1-second surge T=25°C (A peak) On-state voltage drop at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s) Static (off-state) dv/dt (Vµs) Supply frequency range (Hz) cos ϕ (Zero voltage) Rth junction/ambient air SCR 48-660 1200 25 20 100 750 145 1.6 1250 500 47 to 80 > 0.5 2.5° C/W Part numbers Zero voltage switching Rating Output voltage 12 A 24-280 V a 25 A 25 A 24-280 V a 48-660 V a Input voltage 180-280 V a c 4-32 V c 90-140 V a 180-280 V a c 4-32 V c 90-140 V a 180-280 V a c 4-32 V c 90-140 V a Triac 84 130 100 84 130 101 84 130 150 84 130 102 84 130 103 84 130 152 84 130 118 84 130 116 84 130 158 SCR 84 130 117 GRD range - single-phase with SCR Zero voltage switching 4 1 1 SCR Instantaneous switching Rating Output Input voltage voltage 25 A 48-660 V a 4-32 V c Thermal dissipation curves GRD range - single-phase with triac Input specifications Input voltage (V) Drop-out voltage Maximum current (at Vmax) Nominal input resistance Response time (close) Response time (open) 90-280 a c 10 Vrms 5.5 mArms 45 kΩ 20 ms 30 ms 4-32 c 1V c 12 mA 3 kΩ 0.5 cycle max. 0.5 cycle max. 3 U 1 2 3 + 2 4 Instantaneous switching 4 1 3 U 1 2 For instantaneous switching models, turn-on time is less than 100 µs + 3 2 4 4 Characteristics Operating temperature (° C) Storage temperature (° C) Input to output insulation voltage (Vrms) Breakdown voltage (Vrms) Input/output capacitance (pF) Material Casing Baseplate Weight (g) Terminal capacity -20 to +80 -40 to +100 4000 2500 8 Self-extinguishing (UL 94 V0) Aluminium 250 Ø 2 mm max. Curves for temperature-dependent derating GRD range 22.5 mm - 12 A (Triac) I(A) 12 10 8 6 4 2 0 0 10 20 30 40 50 60 70 t (° C) GRD range 22.5 mm - 25 A (Triac) I (A) 25 A (SCR) I (A) Dimensions 11,25 5,15 5 4,5 25 20 15 10 5 0 0 10 25 40 50 60 70 t (° C) 25 20 15 10 5 0 0 10 25 40 50 60 70 t (° C) 87,70 98 80 43,85 To order, specify : Standard products Ø 4,5 12,2 22,50 6,80 102,80 9 Standard products, non stocked Part number Example: Solid state relay GMS range 22.5 mm - 84 130 100 1 4/11 Solid state relays with integrated heatsink, DIN rail mounting - GRD range 90 mm Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s s s Three-phase Complete, compact units Tailor-made solution to current sinks DIN rail and panel mounting Rating: 3 x 25 A Back-to-back SCRs Protection by RC filter Optional protection by removable varistor LED display of input status UL - cUL approval and CE marking SCR 48-660 1200 3 x 25 20 per phase 100 per phase 500 145 1.6 1260 500 47 to 80 > 0.5 1° C/W Output specifications Voltage range (Vrms max) Peak voltage (t=1 min.) (Vpeak) Maximum current (A) Maximum off-state leakage (mA) at Vmax and T = 25 °C Minimum current (mArms) Max. 1-cycle surge T=25°C (A peak) Max. 1-second surge T=25°C (A peak) On-state voltage drop at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s Static (off-state) dv/dt (Vµs) Supply frequency range (Hz) cos ϕ (Zero voltage) Rth junction/ ambient air Part numbers Zero voltage switching Rating Output voltage 3 x 25 A 48-660 V a Instantaneous switching Rating Output voltage 3 x 25 A 48-660 V a Thermal dissipation curves GRD range - three-phase with SCR A1+ U 1 Input voltage 90-280 V a c 4-32 V c Input voltage 4-32 V c SCR 84 130 311 84 130 310 SCR 84 130 312 1 2 3 U Input specifications Input voltage (V) Drop-out voltage Maximum current (at Vmax) Nominal input resistance (kΩ) Response time (close) Response time (open) 90-280 a c 10 Vrms 10 mArms 45 20 ms 30 ms 4-32 c 1V c 10 mA 3 0.5 cycle max. 0.5 cycle max. Curves for temperature-dependent derating GRD range 90 mm - 3 x 20 A I(A) 25 4 5 U A2- 6 For instantaneous switching models, turn-on time is less than 100 µs 4 Characteristics Operating temperature (°C) Storage temperature (°C) Input to output insulation voltage (Vrms) Breakdown voltage (Vrms) Input/output capacitance (pF) Material Casing Baseplate Weight (g) -20 to +80 -40 to +100 4000 2500 8 Self-extinguishing (UL 94 V0) Aluminium 940 20 15 10 5 0 0 10 20 30 40 50 60 70 t (° C) Dimensions 80,70 3,20 5 4,5 87,70 98 80 43,85 To order, specify : Standard products 6,80 102,80 Ø 4,5 9 12,2 9,30 90 Standard products, non stocked Part number Example: Solid state relay GRD range 90 mm - 84 130 311 1 4/13 Solid state relays with integrated heatsink, DIN rail mounting - GRD range 45 mm Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s s s Single phase Complete, compact units Tailor-made solution to current sinks DIN rail and panel mounting Rating: 35 and 45 A Back-to-back SCRs Protection by RC filter Optional protection by removable varistor LED display of input status UL - cUL approval and CE marking SCR 48-660 1000 (1) 35 4 100 750 145 1.6 1260 500 47 to 80 > 0.5 3.78° C/W 5000 45 Output specifications Voltage range (Vrms max) Peak voltage (t=1 min.) (Vpeak) Maximum current (A) Maximum off-state leakage at Vmax and T = 25 °C (mArms) Minimum current (mArms) Max. 1-cycle surge T=25°C (A peak) Max. 1-second surge T=25°C (A peak) On-state voltage drop at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s Static (off-state) dv/dt (Vµs) Supply frequency range (Hz) cos ϕ (Zero voltage) Rth junction /ambient air Part numbers Zero voltage switching Rating Output voltage 35 A 48-660 V a 45 A 48-660 V a Input voltage 90-280 V a c 4-32 V c 90-280 V a c 4-32 V c Input voltage 4-32 V c 4-32 V c SCR 84 130 110 84 130 111 84 130 115 84 130 113 SCR 84 130 112 84 130 114 1 Instantaneous switching Rating Output voltage 35 A 48-660 V a 45 A 48-660 V a Thermal dissipation curves GRD range - single-phase with SCR 1.65° C/W Zero voltage switching 4 U Input specifications Input voltage (V) Drop-out voltage Maximum current (at Vmax) Nominal input resistance Response time (close) Response time (open) 90-280 a c 10 Vrms 10 mArms 45 20 ms 30 ms 4-32 c 1V c 12 mA 3 0.5 cycle max. 0.5 cycle max. 1 2 3 Instantaneous switching 4 U 1 2 4 3 For instantaneous switching models, turn-on time is less than 100 µs Curves for temperature-dependent derating GRD range 45 mm - 35 A GRD range 45 mm - 45 A I (A) I (A) Characteristics Operating temperature (° C) -20 to +80 Storage temperature (° C) -40 to +100 Input to output insulation voltage (Vrms) 4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 490 Input terminal Ø 2 mm max. capacity Output terminal Ø 5.6 mm max. capacity (1) Peak voltage 1200V, relay protected to 1100V ± 10% 45 40 35 30 25 20 15 0 10 25 40 50 60 70 t (° C) 45 40 35 30 25 20 15 0 10 25 40 50 60 70 t (° C) Dimensions 35,70 3,20 5 4,5 87,70 98 80 43,85 To order, specify : Standard products Ø 4,5 12,2 9,30 45 6,80 102,80 9 Standard products, non stocked Part number Example: Solid state relay - GRD range 45 mm 84 130 110 1 4/12 Solid state relays with integrated heatsink, DIN rail mounting - GRD range 90 mm Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s s s Two-phase Complete, compact units Tailor-made solution to current sinks DIN rail and panel mounting Rating: 2 x 25 A Back-to-back SCRs Protection by RC filter Optional protection by removable varistor LED display of input status UL - cUL approval and CE marking SCR 48-660 1200 3 x 25 20 per phase 100 per phase 500 135 1.6 1260 500 47 to 80 > 0.5 1° C/W Output specifications Voltage range (Vrms max) Peak voltage (t=1 min.) (Vpeak) Maximum current (A) Maximum off-state leakage (mA) at Vmax and T = 25 °C Minimum current (mArms) Max. 1-cycle surge T=25°C (A peak) Max. 1-second surge T=25°C (A peak) On-state voltage drop at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s Static (off-state) dv/dt (Vµs) Supply frequency range (Hz) cos ϕ (Zero voltage) Rth junction/ambient air Part numbers Zero voltage switching Rating Output voltage 2 x 35 A 48-660 V a Instantaneous switching Rating Output voltage 2 x 35 A 48-660 V a GRD range 90 mm - 2 x 25 A I(A) 25 20 15 10 1 Input voltage 90-280 V a c 4-32 V c Input voltage 4-32 V c SCR 84 130 322 84 130 320 SCR 84 130 321 Curves for temperature-dependent derating Input specifications Input voltage (V) Drop-out voltage Maximum current (at Vmax) Nominal input resistance (kΩ) Response time (close) Response time (open) 90-280 a c 10 Vrms 10 mArms 45 20 ms 30 ms 4-32 c 1V c 10 mA 3 0.5 cycle max. 0.5 cycle max. 5 0 0 10 20 30 40 50 60 70 t (° C) Characteristics Operating temperature (°C) Storage temperature (°C) Input to output insulation voltage (Vrms) Breakdown voltage (Vrms) Input/output capacitance (pF) Material Casing Baseplate Weight (g) -20 to +80 -40 to +100 4000 2500 8 Self-extinguishing (UL 94 V0) Aluminium 940 87,70 98 80 5 4 Dimensions 80,70 3,20 4,5 For instantaneous switching models, turn-on time is less than 100 µs Ø 4,5 9 12,2 9,30 90 6,80 102,80 To order, specify: Standard products 1 Part number Example: Solid state relay - GRD range - 84 130 222 4/14 43,85 GN single phase solid state relays Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s Currents from 10 to 125 A Output voltage from 24 to 660 VAC Optimum thermal response Regulated AC and DC control input Control status LED Available with or without protective cover Part numbers Current Output voltage Input voltage Zero voltage switching with cover without cover 84 137 000 84 137 002 84 137 001 84 137 100 84 137 102 84 137 101 84 137 010 84 137 012 84 137 011 84 137 110 84 137 112 84 137 111 84 137 020 84 137 022 84 137 021 84 137 120 84 137 122 84 137 121 84 137 030 84 137 032 84 137 031 84 137 130 84 137 132 84 137 131 84 137 040 84 137 042 84 137 041 84 137 140 84 137 142 84 137 141 84 137 080 84 137 082 84 137 081 84 137 180 84 137 182 84 137 181 84 134 000 84 134 002 84 134 001 84 134 100 84 134 102 84 134 101 84 134 010 84 134 012 84 134 011 84 134 110 84 134 112 84 134 111 84 134 020 84 134 022 84 134 021 84 134 120 84 134 122 84 134 121 84 134 030 84 134 032 84 134 031 84 134 130 84 134 132 84 134 131 84 134 040 84 134 042 84 134 041 84 134 140 84 134 142 84 134 141 84 134 080 84 134 082 84 134 081 84 134 180 84 134 182 84 134 181 1 Instantaneous switching with cover without cover 84 137 200 84 137 202 84 137 201 84 137 300 84 137 302 84 137 301 84 137 210 84 137 212 84 137 211 84 137 310 84 137 312 84 137 311 84 137 220 84 137 222 84 137 221 84 137 320 84 137 322 84 137 321 84 137 230 84 137 232 84 137 231 84 137 330 84 137 332 84 137 331 84 137 240 84 137 242 84 137 241 84 137 340 84 137 342 84 137 341 84 137 280 84 137 282 84 137 281 84 137 380 84 137 382 84 137 381 84 134 200 84 134 202 84 134 201 84 134 300 84 134 302 84 134 301 84 134 210 84 134 212 84 134 211 84 134 310 84 134 312 84 134 311 84 134 220 84 134 222 84 134 221 84 134 320 84 134 322 84 134 321 84 134 230 84 134 232 84 134 231 84 134 330 84 134 332 84 134 331 84 134 240 84 134 242 84 134 241 84 134 340 84 134 342 84 134 341 84 134 280 84 134 282 84 134 281 84 134 380 84 134 382 84 134 381 10A 24-280VAC 10A 48-660VAC 25A 24-280VAC 25A 48-660VAC 50A 24-280VAC 50A 48-660VAC 75A 24-280VAC 75A 48-660VAC 100A 24-280VAC 100A 48-660VAC 125A 24-280VAC 125A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4-32VDC 18-36VAC/DC 90-280VAC/DC 4 Dimensions 60,2 Characteristics Operating temperature (C°) Storage temperature (C°) I/O insulation voltage ( Vrms) Breakdown voltage ( Vrms) Input/output capacitance ( pF) Frequency ( Hz ) Material Casing Material Baseplate Weight Ip 20 Weight Ip 00 – 20 to + 80 – 40 to + 100 4000 2500 8 47 to 80 polycarbonate UL-94V Zamak 114 g 97 g 44,2 4/-A2 1/L1 30,6 28 3/A1+ 2/T1 45 To order, specify : Standard products 32 47,6 ø4,9 Standard products, non stocked Part number Example: Single phase solid state relay 84 137 120 1 4/15 Thermal curves GN. 10 AMP SSR (1200 & 600 V) GN. 25 AMP SSR (1200 & 600 V) 25,0 50,0 GN. 50 AMP SSR (1200 & 600 V) Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com 10,0 8,0 20,0 40,0 6,0 Load current ( A ) Load current ( A ) 15,0 Load current ( A ) 20 25 30 35 40 45 50 55 60 65 70 75 80 Ambient temperature ( ° C) HEATSINK 30,0 4,0 10,0 20,0 2,0 5,0 10,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 Ambient temperature ( ° C) HEATSINK 0,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 Ambient temperature ( ° C) HEATSINK 3,0°C/W 5,0°C/W 7,0°C/W 1,0°C/W 1,5°C/W 2,0°CW 1,7°C/W 3,0°CW 0,5°C/W 0,7°C/W 1,5°C/W 1,0°C/W 2,0°C/W GN. 75 AMP SSR (1200 & 600 V) 75,0 100,0 90,0 80,0 70,0 50,0 60,0 Load current ( A ) Load current ( A ) 50,0 40,0 30,0 20,0 10,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 Ambient temperature ( ° C) HEATSINK GN. 100 AMP SSR (1200 & 600 V) 125,0 GN. 125 AMP SSR (1200 & 600 V) 100,0 75,0 Load current ( A ) 10 20 30 40 50 60 70 80 50,0 4 25,0 25,0 0,0 0 0,0 0 10 20 30 40 50 60 70 80 Ambient temperature ( ° C) HEATSINK Ambient temperature ( ° C) HEATSINK 0,4°C/W 0,5°C/W 1°C/W 0,7°C/W 1,5°C/W 0,25°C/W 0,4°C/W 0,7°C/W 0,5°C/W 1,0°C/W 0,25°C/W 0,4°C/W 0,7°C/W 0,5°C/W 1,0°C/W Control specifications Drop-out voltage Max. regulated current (mA) Turn-on time (ms) (zero voltage relay) Turn-on time (ms) (instantaneous relay) Turn-off time (ms) 4-32 VDC 1V 14 8.33 (60Hz) - 10 (50Hz) 0.1 8.33 (60Hz) - 10 (50Hz) 18-36 VAC/DC 1V 20 20 0.1 30 90-280VAC/DC 10V 8.5 20 0.1 30 Output specifications Peak voltage not rep. (Vp) Off-state leakage (@ Vmax and T=25°C) Max. current (A) Minimum current (mA) Max. non-rep. 1 s surge (T=25°C) (A) Max. non-rep. 1-cycle surge (T=25°C) (A) |2t (50Hz-60Hz) (A2S) Voltage drop at Imax (T=25°C) (V) Static dV/dt (V/µs) Thermal resistance Junction/to casing (°C/W) 10 100 80 300 375-450 1.4 500 0.4 24-280 VAC 600 2.5 - 4.25 25 100 150 500 1041-1250 1.4 500 0.4 48-660 VAC 1200 2.75 - 4.75 125 100 510 1700 12041-14450 1.25 500 0.15 50 75 100 100 100 100 235 300 360 780 1000 1200 2535-3042 4166-5000 6000-7000 1.35 1.3 1.3 500 500 500 0.25 0.155 0.155 4/16 GN Triac low-cost single-phase solid state relays : GNA5 range Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s Intended for resistive loads Current ratings 10 and 25 A Output voltage 24 to 280 V a "Zero voltage" switching Optimum thermal response Control input 3-32 V c, 18 to 36 V a, 90 to 280V a Connection via screws or faston connectors UL/cUL, TUV approval and CE marking Part numbers 24-280 V a 500 4.75 10 100 30 100 50 - 41 1.65 200 3 25 100 75 250 288 - 240 1.85 200 2 Rating 10 A 25 A Output voltage 24-280 V a 24-280 V a Input voltage 3-32 V c 18-36 V a c 90-280 V a c 3-32 V c 18-36 V a c 90-280 V a c Screw 84 134 900 84 134 902 84 134 901 84 134 910 84 134 912 84 134 911 Faston 84 134 907 84 134 908 84 134 909 84 134 917 84 134 918 84 134 919 Output specifications Range Non-rep. peak voltage (Vp) Maximum off-state leakage (at Vmax and T = 25° C) (mA) Peak voltage (Arms) Minimum current (mArms) Max. non-rep. surge for 1 s (T = 25° C (A)) Max. non-rep. surge for 1 cycle (T = 25° C (A)) I2t (50 Hz-60Hz) (A2s) Voltage drop at Imax T = 25° C (V) Static dV/dt (V/µs) Rth junction/casing (°C/W) 1 Thermal dissipation curves 10 A 10.0 1. 5˚ C 2. 0˚ /W C/ 3.0 W ˚C /W W C/ 0˚ 1. Input specifications Drop-out voltage (V) Max. current (mA) Turn-on time (ms) Turn-off time (ms) 4-32 V c 1 14 8.33 (60Hz) 10 (50Hz) 8.33 (60Hz) 10 (50Hz) 18-36 V a c 2 8 20 30 90-280 V a c 10 8.5 20 30 8.0 5.0 6.0 ˚C /W 4.0 Characteristics 4 Operating temperature (°C) Storage temperature (°C) I/O insulation voltage (Vrms) Breakdown voltage (Vrms) Input/output capacitance (pF) Frequency (Hz) Material Casing Baseplate Weight (g) -20 to +80 -40 to +100 4000 2500 8 47 to 63 UL 94 V Zamak 97 2.0 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 25 A 25.0 Dimensions 44,4 (1.750) 25,4 (1.0) 20.0 1. 1. 0˚ C 5˚ /W 2.0 C/W ˚C /W 3.0 ˚C /W 5.0 ˚C /W 15.0 57,1 (2.250) 10.0 1/L1 2/T1 5.0 4/-A2 3/A1+ 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 To order, specify: Standard products Part number Example : GN Triac low-cost single-phase solid state relay - 84 134 900 1 Standard products, non stocked 4/20 Crouzet - The online catalogue Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com RESULT OF YOUR SEARCH You are in : Control Automation / Solid state relays / Single-phase GN / GND / FET VERSION / 84 137 870 Specifications Products in the same range 84 137 870 Selling points of the range : q q q q q q FET transistor versions 10, 15 and 30 A Bipolar transistor version 10 A Control voltage : 3 to 32 V Optimum thermal response Available with or without protective cover UL/Cul, TUV approval and CE marking Specifications Current Output voltage input voltage Protective cover Turn-off voltage (V) Thermal resistance Junction to casing (oC/W) Inputs specifications Output characteristics Max. controled current Response time (close) (µs) Response time on closing (µs) Max. non-rep. 10 µ(T=25°C) (A) Minimum current (mA) 30 A 1 - 50 V DC 3 - 32 V DC with protective cover 1 FET 10 A - 15 A : 2,25 FET 30 A : 2,45 20 mA 2 50 FET 10 A : 60 FET 15 A : 120 FET 30 A : 160 1 Products in the same range Bipolar version Current Output voltage 10 A 10 A 3 - 60 V DC 3 - 60 V DC input voltage 3 - 32 V DC 3 - 32 V DC Protective cover without protective cover with protective cover Part number 84 134 750 84 137 750 FET VERSION Current Output voltage 10 A 15 A 30 A 10 A 15 A 30 A 1 - 200 V DC 1 - 100 V DC 1 - 50 V DC 1 - 200 V DC 1 - 100 V DC 1 - 50 V DC input voltage 3 - 32 V DC 3 - 32 V DC 3 - 32 V DC 3 - 32 V DC 3 - 32 V DC 3 - 32 V DC Protective cover without protective cover without protective cover without protective cover with protective cover with protective cover with protective cover Part number 84 134 850 84 134 860 84 134 870 84 137 850 84 137 860 84 137 870 http://www.crouzet.com/OLC/item.cfm?item_id=164202000000315402000001926402 (1 of 2) [8/9/2001 2:24:22 PM] Solid state three-phase motor reversing relay - GA0 range s Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s Reverses rotation of three-phase motors Output voltage 24-480 V~ Input voltage 3-32 V c Input to output insulation voltage: 100ms Interlock against simultaneous actuation in both directions Back-to-back SCRs Input to output insulation voltage: 5000 V a Protected by RC filter and overvoltage limiter Direction of rotation displayed by 2 green LEDs Part number 24-480 1000 25 200 270 10 365 1.6 Vrms 0.2 500 47 to 63 0.2 20 100 84 067 441 Output specifications Voltage range (Vrms) Peak voltage (V peak) Maximum current (Arms) Minimum current (mArms) Max. 1-cycle surge (A peak) Maximum off-state leakage (mArms) I2T (t=10ms) On-state voltage drop at Imax and T=25°C Thermal resistance/Junction to casing (o C/W) Static (off-state) dv/dt (V/µs) Supply frequency range (Hz) Response time (ms) Maximum turn-off time (ms) Reversing time (ms) 1 2 26 532 797 18 373 112 26 532 764 ~ L1 Accessories Protective cover (see page 4/31) Heatsink (see page 4/30) Heat transfer compound (see page 4/32) DIN rail adaptor (see page 4/31) Quick-blow fuses (see page 4/32) Equivalent circuits A1F + Front ~U Input specifications Input voltage (V) Drop-out voltage (V c) Max. input current (mA) (input regulated current and limited) Nominal resistance (+/- 10% at 25°C) (kΩ) 3-32 c 1 20 1 Rear Input A2 ~ L2 Characteristics Operating temperature (°C) Storage temperature (°C) Input to output insulation voltage Breakdown voltage Input/output capacitance (pF) Material Casing Baseplate Weight (g) Connection -20 to +80 -40 to +100 5000 V a 4000 V a 8 Self-extinguishing Aluminium 455 A1R + ~V Thermal dissipation curves GA0 range - 25A Dissipated power (W) 1° C /W Output 50 40 30 20 10 2° C /W 80 90 /W 100 110 120 3° C / W No heatsink L1 L2 L1 L2 U V V U M 0 5 10 15 20 25 10 20 30 40 50 60 70 80 On-state current (A) Ambient temperature (°C) Dimensions (General tolerances +/- 0.5) 104 81 61 41 21 7,62 001744G3 L3 W 4 M4 screws 5,3 L1 U L2 V 47,6 73,5 A1F 12,1 A2 A1R 92 3 M3.5 screws 18,5 22,6 6,35 To order, specify: Standard products 1 Part number 2 Accessory Example: Solid state three-phase motor reversing relay - GA0 range - 84 067 441 - Protective cover - 26 532 797 4/17 Baseplate temperature 0,5 ° C 70 4 Solid state three-phase relays - GA3 range Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com s s s s s s s s s For controlling three-phase loads Rating 10, 25, 45 A Output voltages to 660 Vrms Control voltage 4-32 V c or 90-280 V a Peak voltage: 1200 V Back-to-back SCR output Input to output insulation voltage: 4000 Vrms Protected against overvoltages by RC filter and overvoltage limiter Zero voltage or instantaneous switching Part numbers 10 200 160 10 128 24-660 1200 25 200 270 10 365 1.6 0.25 ° C/W 47 to 63 500 Vµs 11 ms 20 ms 11 ms 30 ms Rating 10 A 45 200 450 10 1000 25 A Switching mode Zero voltage Instantaneous Zero voltage Instantaneous 45 A Zero voltage Instantaneous 0.25 ° C/W 3-32 V c 90-280 V a 3-32 V c 90-280 V a 0.2 ° C/W Input voltage 4-32 V c 4-32 V c 90-280 V a 4-32 V c 90-280 V a 4-32 V c 90-280 V a 4-32 V c 90-280 V a 4-32 V c 84 068 251 84 028 251 84 068 453 84 068 451 84 028 453 84 068 651 84 068 653 84 068 651 84 028 653 84 028 651 26 532 796 18 373 112 26 532 764 Output specifications Voltage range (Vrms) Peak voltage (V peak) Maximum current (Arms) Minimum current (mArms) Max. 1-cycle surge (A peak) Leakage current (mArms) I2t (t=10ms) On-state voltage drop at Imax and T =25°C (Vmax) Thermal resistance/Junction to casing (o C/W) Supply frequency range (Hz) Static (off-state) dv/dt Response time Maximum turn-off time 1 Accessories Protective cover (see page 4/31) Heatsinks (see page 4/30) Heat transfer compound (see page 4/32) DIN rail adaptor (see page 4/31) Quick-blow fuses (see page 4/32) 2 (For instantaneous 3-32 V c switching models, turn-on time is less than 100 µs and turn-off time less than 1/2 cycle.) Equivalent circuits A1+ U1 Input specifications Input voltage (V) Max. input current (mA) (input current limited) Drop-out voltage (V) Nominal input resistance (kΩ) 90-280 a 10 10 a 4-32 c 20 Input 4 U2 V1 Output 1c 1 Characteristics Operating temperature (°C) Storage temperature (°C) Input to output insulation voltage (Vrms) Breakdown voltage (T=25°C, 1s) (Vrms) Input/output capacitance (pF) Insulation resistance (MΩ) Material Casing Baseplate Weight (g) -20 to +80 -40 to +100 4000 4000