A7OQS200-4K

AMP-TRAP®–Form 101 A70QS SEMICONDUCTOR PROTECTION FUSES A70QS Amp-trap® Semiconductor Protection fuses were developed in response to the need for improved overall performance of 700 volt semiconductor fuses for new equipment requirements. A70QS fuses have lower I2t for better protection, longer life when subjected to cyclic loading, plus lower watts loss. A70QS is the best choice to protect dynamic solid state equipment such as motor drives, UPS, etc. Features / Benefits ® Very Low l2t for improved protection of equipment ® Superior cycling ability for long, reliable life on high cyclic loading ® Low watts loss for cooler operation ® 700V AC/DC rating gives greater design versatility ® Ultra compact sizes allow down-sizing of existing equipment Ratings ® AC: 35-800A 700VAC, 200kA I.R. Approvals ® UL Recognized Component, AC/DC ® AC: Guide No. JFHR2 ® DC: Tested to UL Standard 198L Parameters (35-800A) ® CSA Certified File LR 12636 HIGHLIGHTS: 700V AC/DC Rated 2 ® Very Low l t ® Low Watts Loss ® Superior Cycling Ability ® APPLICATIONS: ® Protection of 700V or less motor drives, UPS, inverters, etc. ® DC: 35-800A 700VDC, 100kA I.R. L/R = 10ms Catalog Numbering System Amp-trap® Fuse Rated Volts - 700 Style A 70 QS 150 4,4K A 70 QS 150 - 4 Single Pole Fuse Blocks for A70QS Fuses FUSE AMPERE RATING 35-200 225-600 700-800 FUSE BLOCK CATALOG NUMBER P243C P266A 15C 375 Amperes* Mounting Types* Blades, bolt-in * For ampere ratings and types not listed, consult the factory. D 32 AMP-TRAP®–Form 101 A70QS AMPERE RATING 35 40 50 60 70 80 90 CATALOG NUMBER A7OQS35-4 A7OQS40-4 A7OQS50-4 A7OQS60-4 A7OQS70-4 A7OQS80-4 A7OQS90-4 AMPERE RATING 100 125 125 150 150 175 175 CATALOG NUMBER A7OQS100-4 A7OQS125-4 A7OQS125-4K A7OQS150-4 A7OQS150-4K A7OQS175-4 A7OQS175-4K AMPERE RATING 200 200 250 300 350 400 450 SEMICONDUCTOR PROTECTION FUSES CATALOG NUMBER A7OQS200-4 A7OQS200-4K A7OQS250-4 A7OQS300-4 A7OQS350-4 A7OQS400-4 A7OQS450-4 AMPERE RATING 450 500 500 600 600 700 800 CATALOG NUMBER A7OQS450-4K A7OQS500-4 A70QS500-4K A7OQS600-4 A7OQS600-4K A7OQS700-4 A7OQS800-4 Standard Fuse Ampere Ratings, Catalog Numbers For ampere ratings and styles not listed, call Technical Services. (including indicators) Dimensions CATALOG NUMBER A70QS35 to 100 A70QS125 to 200 A70QS125 to 200 A70QS225 to 400 A70QS450 to 600 A70QS450 to 600 A70QS700 to 800 MOUNTING TYPE 4 4 4K 4 4 4K 4 A 4.38 (111) 4.38 (111) 5.09 (129) 5.09 (129) 5.09 (129) 7.09 (180) 7.09 (180) B 1.00 (25.4) 1.22 (31.0) 1.22 (31.0) 1.50 (38.1) 2.00 (50.8) 2.00 (50.8) 2.50 (63.5) DIMENSIONS - INCHES (mm) C D E F 2.88 (73.0) 2.88 (73.0) 2.88 (73.0) 2.84 (72.2) 2.84 (72.2) 2.84 (72.2) 2.84 (72.2) 3.69 (93.6) 3.69 (93.6) 4.19 (106) 4.16 (106) 4.16 (106) 6.16 (156) 5.28 (134) 3.50 (88.9) 3.56 (90.5) 3.50 (88.0) 3.53 (89.7) 3.53 (89.7) 3.53 (89.7) 4.91 (125) 0.31 (7.9) 0.31 (7.9) 0.41 (10.3) 0.40 (10.3) 0.41 (10.3) 0.53 (13.5) 0.53 (13.5) G 0.75 (19.0) 1.00 (25.4) 1.00 (25.4) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 2.00 (50.8) H 0.13 (3.2) 0.19 (4.8) 0.19 (4.8) 0.25 (6.4) 0.25 (6.4) 0.25 (6.4) 0.38 (9.5) D I2t Data – 700 Volts AC, 200kA FUSE AMPERE RATING 35 40 50 60 70 80 90 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 I2t DATA CLEARING AT 700V AC MELTING 1 FUSE 2 FUSES IN (FIG. A) SERIES (FIG. B) (A2s x 103) (A2s x 103) (A2s x 103) 0.13 0.47 0.27 0.33 0.58 0.16 0.24 0.86 0.49 0.32 1.2 0.69 0.50 1.8 1.0 0.65 2.3 1.3 0.83 3.0 1.7 2.1 3.6 1.0 2.1 6.9 4.0 3.3 11 6.3 8.0 14 4.2 5.9 19 11 17 30 9.0 12.6 42 24 16.7 55 32 21.5 72 41 57 99 29.7 36.7 125 72 47.1 160 92 222 127 65.2 103.6 332 190 248 433 135.3 700 VAC Fault Load 700 VAC Fault Load Fig. A Fig. B Clearing I2t vs. AC Operating Voltage Correction Factor for I t 2 Operating Voltage (AC RMS Volts) D 33 AMP-TRAP®–Form 101 A70QS SEMICONDUCTOR PROTECTION FUSES A70QS35 to 800 Melting Time – Current Data, 700V Fuses Time in Seconds Current in Amperes Peak Let-Thru Current Data – A70QS35 to 800, 700 Volts AC Maximum Instantaneous Peak Let-Thru Amperes Available Current in RMS Symmetrical Amperes D 34 AMP-TRAP®–Form 101 A70QS Clearing I2t at 700V DC, 100kA, L/R = 10 ms 2 CLEARING I t 2 3 (A sx10 ) SEMICONDUCTOR PROTECTION FUSES AMPERE RATING 35 40 50 70 80 90 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 0.25 0.35 0.60 1.3 1.8 2.4 3.1 5.3 8.1 12 16 21.5 27.5 42 63 85 115 150 201 325 450 Maximum Peak Arc Volts D Circuit Voltage (Volts RMS) Watts Loss at Rated Current AMPERE RATING 35 40 50 60 70 80 90 100 125 150 175 WATTS LOSS (w) 6.2 7.5 9.8 12 15 18 20 24 22 29 35 AMPERE RATING 200 225 250 300 350 400 450 500 600 700 800 WATTS LOSS (w) 41 37 42 53 64 75 78 92 116 125 143 DC Voltage Capability vs. Time Constant Watts Loss vs. % Rated Current L/R Time Constant (ms) D 35 Correction Factor for Watts Loss DC Voltage Capability Percent Rated Current