AT043TN13

I NNO L U X D ISPLAY CORPORATION L CD MODULE S P E C I F I C AT I O N C ustomer: M odel Name: S PEC NO.: D ate: Version: AT043TN13 V.10 A043-13-TT-101 2006/08/02 02 ■ Preliminary Specification □ Final Specification F or Customer ’s Acceptance Approved by Comment A pproved by Review ed by Prepared by The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX Contents 1. 2. General Specifications ......................................................................................................... 1 Pin Assignment .................................................................................................................... 2 2.1. TFT LCD Panel Driving Section...................................................................................... 2 2.2. Backlight Unit Section..................................................................................................... 4 3. Operation Specifications ...................................................................................................... 5 3.1. Absolute Maximum Rating.............................................................................................. 5 3.1.1. Typical Operation Conditions.................................................................................. 6 3.1.2. Current Consumption ............................................................................................. 7 3.1.3. Backlight Driving Conditions ................................................................................... 7 3.2. Power Sequence ............................................................................................................ 8 3.3. Timing Characteristics .................................................................................................... 9 3.3.1. Timing Conditions ................................................................................................... 9 3.3.2. Timing Diagram .................................................................................................... 11 4. Touch Screen Panel Specifications .................................................................................... 13 4.1. Electrical Characteristics .............................................................................................. 13 4.2. Mechanical & Reliability Characteristics ....................................................................... 13 4.3. Touch Screen Panel Block............................................................................................ 14 4.4. Touch Screen Panel Pin Definition ............................................................................... 14 5. 6. 7. Optical Specifications......................................................................................................... 15 Reliability Test Items .......................................................................................................... 19 General Precautions .......................................................................................................... 20 7.1. Safety ........................................................................................................................... 20 7.2. Handling ....................................................................................................................... 20 7.3. Static Electricity ............................................................................................................ 20 7.4. Storage ......................................................................................................................... 20 7.5. Cleaning ....................................................................................................................... 20 8. 9. Mechanical Drawing........................................................................................................... 21 Package Drawing............................................................................................................... 22 The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 1. General Specifications No. 1 2 3 4 5 6 7 8 9 10 11 12 13 LCD size Driver element Resolution Display mode Dot pitch Active area Module size Surface treatment Color arrangement Interface Backlight Power consumption Panel Power consumption Weight Item SPEC NO.: A043-13-TT-101 PAGE: 1/22 Specification 4.3 inch(Diagonal) a-Si TFT active matrix 480X3(RGB)X272 Normally White, Transmissive 0.066(W)X0.198(H) mm 95.04(W)X53.856(H) mm 105.5(W)X67.2(H)X4.95(D) mm Anti-Glare RGB-stripe Digital TBD TBD TBD Remark Note 1 Note 1: Refer to Mechanical Drawing. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 2. Pin Assignment 2.1. TFT LCD Panel Driving Section SPEC NO.: A043-13-TT-101 PAGE: 2/22 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol GND GND VDD VDD R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 I/O P P P P I I I I I I I I I I I I I I I I Power ground Power ground Power supply Power supply Red data (LSB) Red data Red data Red data Red data Red data Red data Red data (MSB) Function Remark Green data (LSB) Green data Green data Green data Green data Green data Green data Green data (MSB) The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 B0 B1 B2 B3 B4 B5 B6 B7 GND PCLK DISP HSYNC VSYNC DE AVDD AVDD NC NC GND GND I I I I I I I I P P I I I I P P P P Blue data (LSB) Blue data Blue data Blue data Blue data Blue data Blue data Blue data (MSB) Power ground Pixel clock Display on/off Horizontal Sync Signal Vertical Sync Signal Data Enable Power supply (+5V) Power supply (+5V) No connection No connection Power ground Power ground SPEC NO.: A043-13-TT-101 PAGE: 3/22 I: input, O: output, P: Power The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 2.2. Backlight Unit Section SPEC NO.: A043-13-TT-101 PAGE: 4/22 Pin No. 1 2 3 4 Symbol VLED 1VLED 2VLED 2+ VLED 1+ I/O P P P P Function Ground (cathode) Ground (cathode) LED Input terminal (anode) LED Input terminal (anode) Remark The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 3. Operation Specifications 3.1. Absolute Maximum Rating SPEC NO.: A043-13-TT-101 PAGE: 5/22 (GND=AVSS=0V, Note 1) Values Item Symbol Min. VDD Power voltage AVDD Input signal voltage Logic input -0.3 -0.3 (-20) (-30) 6.0 VDD+0.3 (70) (80) V V ℃ ℃ -0.3 6.0 Max. V Unit Remark Operation Temperature TOP Storage Temperature TST Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 3.1.1. Typical Operation Conditions SPEC NO.: A043-13-TT-101 PAGE: 6/22 (GND=AVSS=0V, Note 1) Values Item Symbol Min. 2.3 VDD Power voltage AVDD Input logic high voltage Input logic low voltage VIH VIL 3.1 4.8 0.7VDD 0 3.3 5.0 3.5 5.2 VDD 0.3VDD V V V V Typ. 2.5 Max. 2.7 V Note 2 Unit Remark Note 1: Be sure to apply VDD and VGL to the LCD first, and then apply VGH. Note 2: You should choose only one from the typical values of VDD. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 3.1.2. Current Consumption (GND=AVSS=0V) Values Item Symbol Min. IDD Current for Driver IAVDD 3.1.3. TBD TBD Typ. TBD Max. TBD SPEC NO.: A043-13-TT-101 PAGE: 7/22 Unit Remark mA mA VDD =2.5V AVDD =5.0V Backlight Driving Conditions Values Item Symbol Min. Typ. 19.8 (16) Max. 21.0 V Unit Remark LED voltage LED current LED life time VL IL - - Note 2 Note 2 Note 1 mA Hr 20,000 - Note 1: The “LED life time” is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25℃ and IL =16mA. Note 2: The LED driving condition is defined for each LED module (6 LED Serial). The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 3.2. Power Sequence SPEC NO.: A043-13-TT-101 PAGE: 8/22 To prevent a latch-up or DC operation of the LCD module, the power on/off sequence should be as the diagram below. Symbol T1 T2 T3 T4 Specification 0≦T1≦10 msec 0≦T2≦100 msec 0≦T3≦50 msec 0≦T4≦10 msec Symbol T5 T6 T7 T8 Specification 0≦T5≦160 msec 160 msec≦T6 160 msec≦T7 1 msec≦T8 The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 3.3. Timing Characteristics 3.3.1. Timing Conditions SPEC NO.: A043-13-TT-101 PAGE: 9/22 (TA = 25℃, VDD = 2.3V~3.5V, GND = 0V) Values Item Symbol Min. Clock cycle Hsync cycle Vsync cycle Horizontal signal Horizontal display period Horizontal Front porch Horizontal Pulse width Horizontal Back porch Vertical cycle Vertical display period Vertical Front porch Vertical Pulse width Vertical Back porch DISP Setup Time DISP Hold Time Clock Period Clock Pulse High Period Clock Pulse Low Period Hsync Setup Time Hsync Hold Time 1/tC 1/fH 1/fV th thd thf thp thb tv tvd tvf tvp tvb tdiss tdish 2 2 2 2 2 2 10 10 Typ. 9.00 17.14 59.94 525 480 41 286 272 2 10 2 Max. 15 MHz KHz Hz CLK CLK CLK CLK CLK H H H H H ns ns ns ns ns ns ns Note 2 Note 2 Note 2 Note 1 Unit Remark PW CLK 66.7 PWH PWL ths thh 26.7 26.7 10 10 The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX Data Setup Time Data Hold Time DE Setup Time DE Hold Time Vsync Setup Time Vsync Hold Time tds tdh tdes tdeh tvhs tvhh 10 10 10 10 10 10 - SPEC NO.: A043-13-TT-101 PAGE: 10/22 ns ns ns ns ns ns Note 1: thd=480CLK, thf= 2CLK, thp= 41CLK, thb= 2CLK 525CLK=480CLK + 2CLK + 41CLK + 2CLK Note 2: thf+ thp+ thb﹥44 CLK The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 3.3.2. Timing Diagram SPEC NO.: A043-13-TT-101 PAGE: 11/22 Vsync tV tVp tVb tVd tVf Hsync DE Hsync DE Dn7Dn0 invalid 1st line 2nd line 3rd line 4th line 5th line last line invalid th Hsync 1/tc thp CLK thb thd thf DE Dn7Dn0 invalid 1st 2nd pixel pixel last pixel invalid The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX SPEC NO.: A043-13-TT-101 PAGE: 12/22 The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 4. Touch Screen Panel Specifications 4.1. Electrical Characteristics Value Item Min. Linearity Terminal Resistance Insulation resistance Voltage Chattering Transparency -1.5 100 100 25 79 Typ. 5 Max. 1.5 900 900 7 10 % Ω Ω MΩ V ms % Unit SPEC NO.: A043-13-TT-101 PAGE: 13/22 Remark Analog X and Y directions X(Film side) Y(Glass side) DC 25V DC 100kΩ pull-up JIS K7105 Note: Do not operate it with a thing except a polyacetal pen (tip R0.8mm or less) or a finger, especially those with hard or sharp tips such as a ball point pen or a mechanical pencil. 4.2. Mechanical & Reliability Characteristics Value Item Min. Activation force Durability-surface scratching Durability-surface pitting Surface hardness 80 Write 100,000 1,000,000 3 Typ. Max. - Unit Remark g characters touches H Note 1 Note 2 Note 3 JIS K5400 Note 1: Stylus pen input: R0.8mm polyacetal pen or finger. Note 2: Measurement for surface area. -Scratch 100,000 times straight line on the film with a stylus change every 20,000 The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX SPEC NO.: A043-13-TT-101 PAGE: 14/22 times. -Force: 250gf. -Speed: 60mm/sec. -Stylus: R0.8 polyacetal tip. Note 3: Pit 1,000,000 times on the film with a R0.8 silicon rubber. -Force: 250gf. -Speed: 2times/sec. 4.3. Touch Screen Panel Block Top View 4.4. Pin No. 1 2 3 4 Touch Screen Panel Pin Definition Symbol Y2 X2 Y1 X1 I/O Top Left Function Top electrode – differential analog Left electrode – differential analog Remark Bottom Bottom electrode – differential analog Right Right electrode – differential analog The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 5. Optical Specifications SPEC NO.: A043-13-TT-101 PAGE: 15/22 Values Item Symbol Condition Min. θL Viewing angle (CR≥ 10) θR θT θB TON Response time TOFF Contrast ratio CR WX Color chromaticity WY L1 Luminance L2 Luminance uniformity YU (300) 70 (350) 75 cd/m² % Normal θ=Φ=0° (0.28) (0.33) (0.38) (400) (0.26) (15) (500) (0.31) (30) (0.36) msec Note 3 Note 4 Note 2 Note 5 Note 6 Note 6 (230) (280) cd/m² (With touch screen) Unit Typ. (70) (70) (50) (70) (10) Max. degree Remark Φ=180°(9 o’clock) (60) Φ=0°(3 o’clock) (60) Note 1 Φ=90°(12 o’clock) (40) Φ=270°(6 o’clock) (60) - (20) msec Note 3 Note 6 (Without touch screen) Note 7 Test Conditions: 1. VDD=3.3V, IL=16mA (Backlight current), the ambient temperature is 25℃. 2. The test systems refer to Note 2. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX Note 1: Definition of viewing angle range Normal line θ=Φ=0° SPEC NO.: A043-13-TT-101 PAGE: 16/22 Φ=90° 12 o’clock direction θL θB θR θT Φ=180° Active Area Φ=0° Φ=270° 6 o’clock direction Fig. 4-1 Definition of viewing angle Note 2: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1° /Height: 500mm.) Photo detector Normal line θ=Φ=0° Φ=90° 12 o’clock direction 500mm Φ=180° Active Area Φ=0° Φ=270° 6 o’clock direction Fig. 4-2 Optical measurement system setup The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX SPEC NO.: A043-13-TT-101 PAGE: 17/22 Note 3: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. White (TFT OFF) Photo detector output (Relative value) 100% 90% Black (TFT ON) White (TFT OFF) 10% 0% TON TOFF Fig. 4-3 Definition of response time Note 4: Definition of contrast ratio Contrast ratio (CR) = Luminance measured when LCD on the " White" state Luminance measured when LCD on the " Black" state Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX SPEC NO.: A043-13-TT-101 PAGE: 18/22 Note 7: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area. Luminance Uniformity (Yu) = L-------Active area length B min B max W----- Active area width L W/6 L/6 L/3 L/3 W W/3 Fig. 4-4 Definition of measuring points Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position. The copyright belongs to InnoLux. Any unauthorized use is prohibited. W/3 INNOLUX 6. Reliability Test Items (Note3) Item High Temperature Storage Low Temperature Storage High Temperature Operation Low Temperature Operation Operate at High Temperature and Humidity Thermal Shock Ta = (80℃) Ta = (-30℃) Ts = (70℃) Ta = (-20℃) +40℃, 90%RH Test Conditions SPEC NO.: A043-13-TT-101 PAGE: 19/22 Remark Note 1 Note 1 Note 2 Note 1 240 hrs 240hrs 240hrs 240hrs 240 hrs -30℃/30 min ~ +80℃/30 min for a total 100 cycles, Start with cold temperature and end with high temperature Frequency range:10~55Hz Stroke:1.5mm Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X. Y. Z. (6 hours for total) 100G 6ms,±X, ±Y, ±Z 3 times for each direction Random Vibration : 0.015G*G/Hz from 5-200HZ, -6dB/Octave from 200-500HZ 2 hours for each direction of X. Y. Z. (6 hours for total) Height:60 cm 1 corner, 3 edges, 6 surfaces ± 2KV, Human Body Mode, 100pF/1500Ω Vibration Test Mechanical Shock Package Vibration Test Package Drop Test Electro Static Discharge Note 1: Ta is the ambient temperature of samples. Note 2: Ts is the temperature of panel’s surface. Note 3: In the standard condition, there shall be no practical problem that may affect the display function. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 7. General Precautions 7.1. Safety SPEC NO.: A043-13-TT-101 PAGE: 20/22 Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 7.2. Handling 1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface. 2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages. 3. To avoid contamination on the display surface, do not touch the module surface with bare hands. 4. Keep a space so that the LCD panels do not touch other components. 5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages. 6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs. 7. Do not leave module in direct sunlight to avoid malfunction of the ICs. 7.3. Static Electricity 1. Be sure to ground module before turning on power or operating module. 2. Do not apply voltage which exceeds the absolute maximum rating value. 7.4. Storage 1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less. 2. Do not store the module in surroundings containing organic solvent or corrosive gas. 3. Store the module in an anti-electrostatic container or bag. 7.5. Cleaning 1. Do not wipe the polarizer with dry cloth. It might cause scratch. 2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer. The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 8. Mechanical Drawing SPEC NO.: A043-13-TT-101 PAGE: 21/22 The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX 9. Package Drawing TBD SPEC NO.: A043-13-TT-101 PAGE: 22/22 The copyright belongs to InnoLux. Any unauthorized use is prohibited.