AVR-P40B-8535-4MHZ

AVR-P40B-8535-4MHZ

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    AVR-P40B-8535-4MHZ - AVR-P40B-8535 PROTOTYPE BOARD WITH 10 PIN ICSP CONNECTOR FOR AT90S8535 AVR MICR...

  • 详情介绍
  • 数据手册
  • 价格&库存
AVR-P40B-8535-4MHZ 数据手册
AVR-P40B-8535 PROTOTYPE BOARD WITH 10 PIN ICSP CONNECTOR FOR AT90S8535 AVR MICROCONTROLLERS Features: AVR-P40B-8535 is prototype board for AT90S8535 AVR microcontrollers with following features: - RS232 Tx, Rx interface with MAX232 IC - ICSP 10 pin connector (STK compatible) - RESET IC ZM33064C - Status LED connected to PB0 via removable jumper - 4MHz, 8MHz quartz oscillator - extension slot on each microcontroller pin - DIL40 microcontroller socket - AGND-GND and AVCC-VCC jumpers - power supply plug in jack connector - +5V power supply voltage regulator - 0.1” (2.54 mm) grid - dimensions: 100x80 mm - four mounting holes Lanconelli and the latest release may be download for free from http://www.lancos.com The parallel port ICSP programmer (AVRPG2B) works with AVR ISP from Atmel and may be download for free from Atmel’s web site. ICSP interface: The ICSP connector is 2x5 pin with 0,1" step and Atmel STKxxx compatible layout. The PIN.1 is marked with square pad on bottom and arrow on top. ICSP signals are: 1- MOSI, 2- VCC, 3- NC, 4- GND, 5- RST, 6- GND, 7- SCK, 8- GND, 9MISO, 10- GND TOP view PCB board layout: RS232 interface: J1 removable jumper selects where RTS/DTR line to be connected. In position 12 the line is connected to RTS, in position 23 is connected to DTR. Status LED: Connected to PB0 via removable jumper. Oscillator circuit: Crystal resonator connected to XTAL1 and XTAL2. Analog VCC and GND: J2 connects AVCC to VCC. J3 connects AGND to GND. RESET supervisor circuit: IC ZM33064C with 4.6V threshold. Programming: To program AVR-P40B-8535 you need serial port or parallel port AVR-ICSP programmer dongle (Olimex part # AVR-PG1B or AVRPG2B). The serial port ICSP programmer (AVR-PG1B) works with PonyProg software by from Claudio Supported devices: AT90S8535 and AT90S4434 microcontrollers. Ordering codes: AVR-P40B-8535-4Mhz - assembled and tested AVR-P40B-8535-8MHz - assembled and tested AVR-P40B-8535/PCB - only PCB Copyright(c) 2002, OLIMEX Ltd, All rights reserved. Development boards for PIC, AVR and MSP430 microcontrollers http://www.olimex.com/dev
AVR-P40B-8535-4MHZ
物料型号: - AT90S8535 AVR微控制器 - MAX232 IC - ZM33064C 复位IC

器件简介: AVR-P40B-8535是专为AT90S8535 AVR微控制器设计的原型板,具有RS232 Tx, Rx接口、ICSP 10针连接器、复位IC、状态LED、4MHz和8MHz晶振扩展槽、DIL40微控制器插座、电源插孔和+5V电源电压调节器等功能。

引脚分配: ICSP接口是2x5针,间距为0.1英寸,兼容Atmel STKxxx布局。引脚信号包括: 1. MOSI 2. VCC 3. NC 4. GND 5. RST 6. GND 7. SCK 8. GND 9. MISO 10. GND

参数特性: - 支持4MHz和8MHz晶振 - 提供AGND-GND和AVCC-VCC跳线 - 100x80mm尺寸,0.1英寸(2.54mm)网格

功能详解: - RS232接口:通过可移除的跳线J1选择RTS/DTR线路的连接。 - 状态LED:通过可移除的跳线连接到PB0。 - 晶振电路:晶振连接到XTAL1和XTAL2。 - 模拟VCC和GND:J2将AVCC连接到VCC,J3将AGND连接到GND。 - 复位监督电路:使用ZM33064C IC,阈值为4.6V。

应用信息: 适用于AT90S8535和AT90S4434微控制器。

封装信息: - AVR-P40B-8535-4Mhz - 组装并测试 - AVR-P40B-8535-8MHz - 组装并测试 - AVR-P40B-8535/PCB - 仅PCB
AVR-P40B-8535-4MHZ 价格&库存

很抱歉,暂时无法提供与“AVR-P40B-8535-4MHZ”相匹配的价格&库存,您可以联系我们找货

免费人工找货