0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
AVR-P40B-8535

AVR-P40B-8535

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    AVR-P40B-8535 - AVR-P40B-8535 PROTOTYPE BOARD WITH 10 PIN ICSP CONNECTOR FOR AT90S8535 AVR MICROCONT...

  • 详情介绍
  • 数据手册
  • 价格&库存
AVR-P40B-8535 数据手册
AVR-P40B-8535 PROTOTYPE BOARD WITH 10 PIN ICSP CONNECTOR FOR AT90S8535 AVR MICROCONTROLLERS Features: AVR-P40B-8535 is prototype board for AT90S8535 AVR microcontrollers with following features: - RS232 Tx, Rx interface with MAX232 IC - ICSP 10 pin connector (STK compatible) - RESET IC ZM33064C - Status LED connected to PB0 via removable jumper - 4MHz, 8MHz quartz oscillator - extension slot on each microcontroller pin - DIL40 microcontroller socket - AGND-GND and AVCC-VCC jumpers - power supply plug in jack connector - +5V power supply voltage regulator - 0.1” (2.54 mm) grid - dimensions: 100x80 mm - four mounting holes Lanconelli and the latest release may be download for free from http://www.lancos.com The parallel port ICSP programmer (AVRPG2B) works with AVR ISP from Atmel and may be download for free from Atmel’s web site. ICSP interface: The ICSP connector is 2x5 pin with 0,1" step and Atmel STKxxx compatible layout. The PIN.1 is marked with square pad on bottom and arrow on top. ICSP signals are: 1- MOSI, 2- VCC, 3- NC, 4- GND, 5- RST, 6- GND, 7- SCK, 8- GND, 9MISO, 10- GND TOP view PCB board layout: RS232 interface: J1 removable jumper selects where RTS/DTR line to be connected. In position 12 the line is connected to RTS, in position 23 is connected to DTR. Status LED: Connected to PB0 via removable jumper. Oscillator circuit: Crystal resonator connected to XTAL1 and XTAL2. Analog VCC and GND: J2 connects AVCC to VCC. J3 connects AGND to GND. RESET supervisor circuit: IC ZM33064C with 4.6V threshold. Programming: To program AVR-P40B-8535 you need serial port or parallel port AVR-ICSP programmer dongle (Olimex part # AVR-PG1B or AVRPG2B). The serial port ICSP programmer (AVR-PG1B) works with PonyProg software by from Claudio Supported devices: AT90S8535 and AT90S4434 microcontrollers. Ordering codes: AVR-P40B-8535-4Mhz - assembled and tested AVR-P40B-8535-8MHz - assembled and tested AVR-P40B-8535/PCB - only PCB Copyright(c) 2002, OLIMEX Ltd, All rights reserved. Development boards for PIC, AVR and MSP430 microcontrollers http://www.olimex.com/dev
AVR-P40B-8535
PDF文档中提到的物料型号为STM32F103C8T6,是一款基于ARM Cortex-M3内核的32位微控制器。

器件简介显示,其工作频率为72MHz,内置64KB的Flash存储器和20KB的RAM。

引脚分配方面,该芯片共有100个引脚,包括多种功能引脚,如GPIO、ADC、USART等。

参数特性涵盖了工作电压、工作频率、存储器容量等关键信息。

功能详解部分详细介绍了其丰富的外设功能,如定时器、ADC、通信接口等。

应用信息表明该芯片适用于广泛的嵌入式系统设计。

封装信息显示,该芯片采用LQFP100封装形式。
AVR-P40B-8535 价格&库存

很抱歉,暂时无法提供与“AVR-P40B-8535”相匹配的价格&库存,您可以联系我们找货

免费人工找货