AZ831-2C-48DSE

AZ821/AZ831 SUBMINIATURE DIP RELAY FEATURES • • • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC Single button crossbar contacts High sensitivity, 100 mW pickup Life expectancy to 15 million operations High switching capacity, 60 W, 120 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 GENERAL DATA DPDT (2 Form C) Resistive load: Max. switched power: 60 W or 120 VA Max. switched current: 2 A Max. switched voltage: 150 VDC or 240 VAC Rated Load UL CSA Material Resistance 1.25 A, 100 VDC, 30 W 0.5 A, 125 VAC 1.25 A, 150 VAC, 150 VDC, 30W, 50 VA Gold/silver alloy, gold plated < 50 milliohms initially 200 milliohms at end of life Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 15 x 106 1 x 105 at 2 A 30 VDC Res. 3 ms at nominal coil voltage 2 ms at nominal coil voltage (with no coil suppression) CONTACTS Arrangement Ratings Dielectric Strength 1500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact Insulation Resistance Dropout Capacitance 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage Contact to contact: 2.0 pF Contact set to contact set: 1.5 pF Contact to coil: 5.0 pF At nominal coil voltage AZ821: -40°C (-40°F) to 75°C (167°F) AZ831: -40°C (-40°F) to 95°C (203°F) -40°C (-40°F) to 115°C (239°F) 1.5 mm DA at 10–55 Hz 40 g 11 ms 1/2 sine P.B.T. polyester 94 V-0 Tinned copper alloy 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 6 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature AZ821: 250 mW AZ831: 100 mW 1.7 W at 20°C (68°F) 1.3 W at 40°C (104°F) AZ821: 37°C (67°F) at nominal coil voltage AZ831: 18°C (32°F) at nominal coil voltage Max. 115°C (239°F) Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight 5/25/05 AZ821/AZ831 RELAY ORDERING DATA STANDARD COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 24 48 Nominal Coil VDC 5 6 9 12 24 48 Max. Continuous VDC 7.8 10.9 15.4 21.8 42.2 82.5 Max. Continuous VDC 14.6 17.5 26.2 35.0 70.0 140.0 Coil Resistance ± 10% 36 70 140 280 1050 4000 Coil Resistance ± 10% 125 180 405 720 2,880 11,520 Must Operate VDC 3.75 4.5 6.8 9.0 18.0 36.0 Must Operate VDC 3.75 4.5 6.8 9.0 18.0 36.0 ORDER NUMBER AZ821–2C–5DE AZ821–2C–6DE AZ821–2C–9DE AZ821–2C–12DE AZ821–2C–24DE AZ821–2C–48DE SENSITIVE COIL SPECIFICATIONS ORDER NUMBER AZ831–2C–5DSE AZ831–2C–6DSE AZ831–2C–9DSE AZ831–2C–12DSE AZ831–2C–24DSE AZ831–2C–48DSE MECHANICAL DATA .799 (20.3) .398 (10.1) .010 (0.25) .450 (11.4) .028 (0.72) .138 (3.5) .016 (.04) WIRING DIAGRAM 1 4 6 8 PC BOARD LAYOUT .300 (7.62 ) 16 13 11 9 .300 (7.62) .200 .200 (5.08) (5.08) .0.39 DIA (0.8) 8 HOLES Viewed toward terminals Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 5/25/05