C-13-F02-PD-SFCM

1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/14-FXX-PX-SXXX/XXX-XX Features • Single fiber bi-directional operation • Laser diode with multi-quantum-well structure • Low threshold current • InGaAs/InP PIN Photodiode with trans-impedance amplifier • High sensitivity with AGC* • Differential ended output • Single +3.3V Power Supply • Integrated WDM coupler • Un-cooled operation from -40ºC to +85ºC • Hermetically sealed active component • Single mode fiber pigtailed with optical FC/ST/SC/MU/LC connector • Design for fiber optic networks • RoHS Compliant available Absolute Maximum Rating (Tc=25ºC) Parameter Fiber Output Power LD Reverse Voltage PIN-TIA Voltage Operating Temperature Storage Temperature L/M/H Symbol Pf VRLD VCC Topr Tstg Value 1(L) / 1.5(M) / 2.5(H) 2 4.5 -40 to +85 -40 to +85 Unit mW V V ºC ºC (All optical data refer to a coupled 9/125µm SM fiber) Optical and Electrical Characteristics( Tc=25ºC) Parameter Laser Diode Optical Output Power Peak Wavelength Spectrum Width (RMS) Threshold Current Forward Voltage Rise/Fall Time L M H Symbol Min 0.2 0.5 1 1290 100 -1.5 Typical 0.35 0.75 1.6 1310 10 1.2 6 < -45 Max 0.5 1 1330 3 15 1.5 0.3 0.1 15 1.5 Unit Test Condition Pf λ ∆λ Ith VF tr/ tf Im IDARK Ct ∆Pf/Pf CRT mW nm nm mA V ns µA µA pF CW, Ith+20mA , kink free CW, Pf=Pf(Min) CW, Pf=Pf(Min) CW CW, Pf=Pf(Min) Ibias=Ith ,10% to 90% CW, Pf=Pf(Min),VRPD=2V VRPD=5V VRPD=5V, f=1MHz APC, -40 to +85ºC Monitor Diode Monitor Current Dark Current Capacitance Module Tracking Error Optical Crosstalk dB dB Note: 1.Pin assignment can be customized. 2.Specifications subject to change without notice. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS1545-FEB0906 rev. A.0 1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/14-FXX-PX-SXXX/XXX-XX Detector λ=1480-1500nm DC Electrical Characteristics( Tc=25ºC) Parameter Power Supply Differential Output Voltage Symbol Vcc F02 Vd F04 F06 F02 Min 3.0 185 - Typical 3.3 260 250 21 26 Max 3.6 1000 450 415 35 30 50 Unit V mV Test Condition Supply Current (no load) Icc F04 F06 mA AC/Optical and Electrical Characteristics( Tc=25ºC) Parameter Detection Range Symbol F02 Min 1480 52 6 1.92 120 404 700 -3 -7 -3 48 48 Typical 7 2.5 140 470 920 0 -6 -38 -33 -26 50 50 50 Max 1500 70 3.4 1100 -35 -30 -23 52 62 Unit nm Test Condition Measure differentially, AC coupled, RL=50Ω Gain @ 10 Mbps Differential G F04 F06 F02 V/mW Measure differentially, AC coupled, RL=50Ω Measure differentially with 30uAp-p signal Bandwidth BW F04 F06 F02 MHz BER