C18ST

C18ST OSCILLATOR Specifications Parameters Frequency range Logic output Frequency stability Overall Initial at 25°C Temperature vs supply voltage change vs load change Aging first year Aging over …. Years Operating temperature +- 3,0 ppm +-1,0 ppm best possible Standard 1,000 MHz - 160,0 MHz Clipped sinewave Options Sinewave Please specify 0° C ~ +70°C -20°C ~ +70°C -40°C ~ +85°C Storage temperature Supply voltage -40°C ~ +85°C 3,3 V +-5% Other on custom request -55°C ~ +125°C 5,0 V ± 5% Other on custom request Current Load Jitter ( 12kHz ~ 20,0 MHz ) Phase noise Harmonics Sub-harmonics Start-up time Frequency trimming range with externally adjustable trimmer Marking 2,0 mA max 10 Kohm // 10 pF 3-4 ps typ. Other on custom request Other on custom request Please specify ( if required ) 10 ms max. ± 3 ppm min. Freq + Code + Week +Year Other on custom request other HM International Demer 26 B-2230 Herselt BELGIUM Tel. +32(0)14548955 Fax. +32(0)14549443 email : info@hminternational.be www.hminternational.be 1 C18ST OSCILLATOR Specifications Voltage Control Options External control voltage Linearity Frequency tuning range Pulling slope + 1,65 VDC ±1,65 VDC (3,3V) Other on custom request +2,5 VDC ±2,5 VDC (5,0V) ± 10% max. ± 10 ppm Positive Other on custom request Other on custom request Other on custom request Drawing Package T183C with hole Options Pin configuration #1 : NC / Vco #2 : GND #3 : Output #4 : Vcc HM International Demer 26 B-2230 Herselt BELGIUM Tel. +32(0)14548955 Fax. +32(0)14549443 email : info@hminternational.be www.hminternational.be 2