CR-V3

R Primary Lithium Battery Expert Primary lithium batteries CR-V3 3 .0V 2.9Ah 3 .0V Primary lithium-mamganese dioxide (Li-MnO 2 ) Power type CR-V3 -size spiral cell F or high drain/high pulses applications requesting superior voltage response in -40 ~ +60 environments. Cell size references A lternative models Electrical characteristics (typical values relative to cells stored for one year or less at +30 max.) Nominal capacity (at 1mA +20 2.0V cut off. The capacity resto red by the cell varies according to current drain, temperature and cut off). Open circuit voltage (at +20 ) Nominal voltage (at 1mA +20 ) C R-V3 CR-V3 2.9Ah 3.0V 3.0V Pulse capability: Typically up to 3000 mA (3000 mA/0.1 second pul ses, drained every 2 mn at +20 from undischarged cells with 10 A base current, yield voltage readings above 3.0V. The readings may vary accord ing to the pulse characteristics, the temperature, and the cell s previous history. Fitting the cell with a capacit r may be recommended in severe conditions. o Consult ABLE) Max. Continuous current Max. Pulse current 2000mA 3000mA Storage (recommended) (for more severe conditions, consult ABLE) +30 +86 F max -40 / +60 Operating temperature range (Operation above ambient T may lead to reduced cap acity and lower voltage readings at the beginning of pulses. Consult ABLE) Physical characteristics Diameter (max) Width (max) Height (max) Typical weight Available termination suffix 28.6mm(1.1 in) 19.5mm(0.39 in) 52.2mm(2 in) 39g(1.3oz) - T el: 0086 755 29807561/63 Fax:0086 755 29807510 E mail:able@able-battery.com Web page: www.able-battery.com R Primary Lithium Battery Expert C R-V3 3 .0V 2.9Ah Key features H igh and stable operating voltage Superior drain capability Low self-discharge rate (less than 3% after 1year of storage at +20 ) Optional stainless steel container for low magnetic and nickle plated steel container for more safe design Hermetic glass-to-metal sealing Notch technology for safety vent is recommended PTC for finished product is optional M ain applications R adiocommunication and other military applications Alarms and security systems Beacons and emergency location transmitters GPS Metering systems Sonobuoys LED lighting applications Others Characteristic curves Discharge performance 4 .0 25 Voltage V 3.0 2.0 Storage T he storage area should be clean, cool (not exceeding +30 ), dry and ventilated. 500mA 50mA 2.2Ah 2.6Ah 15mA 2.7Ah 1mA 2.9Ah 1.0 0.1 1 10 10 2 10 3 10 4 10 5 H ours N ominal capacity 2.9Ah 1mA to 2.0V . Warning D o not use if the battery casing was mangled. Don t use different models of battery in series. Soldering the tag should be finished in few seconds . D o not try to recharge. T el: 0086 755 29807561/63 Fax:0086 755 29807510 E mail:able@able-battery.com Web page: www.able-battery.com