D3416-0100S

JNPS-0846 目 次 ／ CONTENTS 頁 / PAGE 機能 ················································································································· 1 FUNCTION············································································································ 6 1. 2. 適合対象 ········································································································· 1 COMPATIBLE OBJECTS ····················································································· 6 3. 関連仕様図 ····································································································· 1 RELATED SPECIFICATION DRAWINGS ························································ 6 4. 関連規格類 ····································································································· 1 RELATED TEST STANDARDS ········································································· 6 5. 適用 ················································································································· 2 APPLICATION ······································································································ 7 6. 品質特性 ······································································································· 3 QUALITY PERFORMANCE················································································· 8 7. 製品上めっき仕様識別表示 ·········································································· 4 PLATING SPEC INDICATION ON CONNECTOR·············································· 9 8. 包装＆表示 ····································································································· 4 PACKAGE & IDENTIFICATION ········································································· 9 9. 保管 ················································································································· 5 STORAGE············································································································ 10 10. 注意事項 ········································································································· 5 ATTENTIONS ····································································································· 10 i JNPS-0846 1. FUNCTION This connector is designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable. This connector has 2 rows of plural U-elements at topside and 2 rows of contact tails at bottom side. Then, this connector has the function of electrical connection between cable and PC board or cable and compatible IC socket (Plating Suffix : SC or S). 2. COMPATIBLE OBJECTS 2-1 WIRE ACCOMODATION 28 AWG Stranded *corresponding with UL Style 2651 2-2 COMPATIBLE BOARD Thickness: 1.6mm ± 0.2mm Through hole diameter: φ1.0mm ± 0.1mm * Refer to the drawing 4U-0010-0940-6. * In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC board by soldering, more than 0.5mm thickness spacers (ex. plastic washer with high temperature resistance) should be used for spacing between the connector body and PC board. 2-3 COMPATIBLE IC SOCKET IS socket should have the compatibility with the following specification of the terminals. PRODUCT No. (X)3406-0000 XX (14Pos.) and (X)3416-0000 XX (16Pos.) (X)3460-0000 XX (24Pos.) LEAD LENGTH 4.4 ± 0.3mm * These connectors don't have standoff bumps. 3.8 ± 0.3mm * Lower side from the bottom of the standoff bumps (Height: 0.6mm). 3.9 ± 0.3mm * Lower side from the bottom of the standoff bumps (Height: 0.5mm). 0.46 ± 0.05mm × 0.36 ± 0.05mm LEAD SECTION (X)3508-0000 XX (40Pos.) * IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S. IC socket can not be used for (X)3XXX-0000 PR. 3. RELATED SPECIFICATION DRAWINGS See the drawings described in JNPD-0846. 4. RELATED TEST STANDARDS MIL-STD-202 JEIDA-38-1984 JIS C 0050 JNTM-0039, JNTM-0040 *JNTM: Test Method Standard of Sumitomo 3M for Electronic and Electrical Component Parts. ６ JNPS-0846 5. APPLICATION PRODUCT NUMBER INFORMATION (X) 3XXX – 0 X 0 0 XX PLATING SUFFIX PR : U-ELEMENT AREA & TAIL AREA / Gold Flash Plating SC : U-ELEMENT AREA / Nickel Plating TAIL AREA / Gold Plating 0.2µm Min S : U-ELEMENT AREA / Nickel Plating TAIL AREA / Gold Plating 0.76µm Min. SHAPE OF TAIL SECTION 0 : Rectangular Pin (0.46mm × 0.36mm) CONTACT DISPOSITION 0: 1: Standard (Body Color : Gray) Mirror Image Type (Body Color : Black) CONTACT QUANTITY 3406: 14P (Distance of terminal row : 7.62mm) 3416: 16P (Distance of terminal row : 7.62mm) 3460: 24P (Distance of terminal row : 15.24mm) 3508: 40P (Distance of terminal row : 15.24mm) BODY COLOR Blank : Gray D : Black (Contact Disposition : Standard) (Contact Disposition : Mirror Image Type) ７ JNPS-0846 6. QUALITY PERFORMANCE 6-1 RATING ITEM CURRENT VOLTAGE TEMPERATURE RATING 1.0A AC: 250V Max. Max. / DC: 300V Max. -55°C ~ 105°C 6-2 PHYSICAL SPECIFICATIONS TEST DESCRIPTION REQUIREMENT Electrical discontinuity: Less than 1µs * The value in ( TEST CONDITION Sweep Freq.: 10∼55Hz, Amplitude: 1.52mm(or 98 m/s2), Sweep Cycle: 1min., Sweep time: 2 hours Sweep in each direction: (X,Y,Z) ) is reference. RELATED STANDARD MIL-STD202F 101A VIBRATION MECHANICAL SHOCK Electrical discontinuity: Less than 1µs Wetting: 95% Min. or Zero cross time: 3 seconds Max. Connector should not have any defect portions after test. 490 m/s2, 11ms, Half sine shock pulse. 3 times / X,Y,Z directions (Total 18 times) Solder: Sn-3Ag-0.5Cu - Wetting Measurement: 245°C, 3 seconds - Wetting Balance Method: 245°C Dip soldering: 260°C, 10 seconds, 2 times or 263°C, 5 seconds, 2 times * without Pre-heating Soldering Iron: Dependence on soldering conditions. * It need the evaluation under actual conditions. MIL-STD202E 213B SOLDERABILITY JNTM-0039 JIS C 0050 SOLDERING HEAT RESISTANCE JNTM-0040 ８ JNPS-0846 6-3 ELECTRICAL SPECIFICATIONS TEST DESCRIPTION DIELECTRIC WITHSTANDING VOLTAGE INSULATION RESIDENSE REQUIREMENT No appearance of arcing and break down. Leak current: 1mA Max. 1000MΩ Min. - Initial / 25 mΩ Max. - Change of contact resistance after environmental tests / 20 mΩ Max. TEST CONDITION Impressed voltage is AC 1000V rms. between adjacent two contacts for one minute. Impressed voltage is DC 500V between adjacent two contacts for one minute. Contact resistance is measured at Short Circuit. Current: 1.5mA Open Circuit Voltage: 20mV by 4 terminal method. * Measurement values include the resistance of contact pins as conductive material. * Refer to Table 1 regarding the conditions of each environmental test. RELATED STANDARD ―――― ―――― CONTACT RESISTANCE See Table 1. Table 1: ENVIROMENTAL TEST ITEM MOISTURE SALT SPRAY THERMAL SHOCK HUMIDITY (STEADY STATE) THERMAL LIFE H2S GAS TEST CONDITION -10 ∼ 65°C, Relative Humidity 95% / 10 cycles NaCl 5% solution, 35°C / 48 hours -55°C→25°C→85°C→25°C / 5 cycles 40°C, Relative Humidity 95% / 96 hours Steady Current: Current Rating × 110%, 85°C / 1000 hours 3 ± 1 ppm, 40°C, Relative Humidity 70 ∼ 80% / 96 hours RELATED STANDARD MIL-STD-202F106D MIL-STD-202F101D MIL-STD-202F107G MIL-STD-202F103B ―――― JEIDA-38-1984 7. PLATING SPEC INDICATION ON CONNECTOR The first letter, in stamped 3 letters on the connector body for lot numbering, identified the following plating specs. N XX or n XX : PR plating C XX or c XX : SC plating S XX or s XX : S plating * XX : two alphabet letters 8. PACKAGE & IDENTIFICATION These products are packed with plastic tray and carton box for transit. Carton box are identified by part number, quantity, maker name and lot number. ９ JNPS-0846 9. STORAGE This products shall be stored in a room, ambient temperature 5 ∼ 35°C, and ambient humidity 40 ∼ 70%. 10. ATTENTIONS 10-1 BOARD MOUNTING In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC board by soldering, more than 0.4mm thickness spacers (ex. plastic washer with high temperature resistance) should be used for spacing between the connector body and PC board. 10-2 COMPATIBILITY WITH IC SOCKET IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S. IC socket can not be used for (X)3XXX-0000 PR. １０