ER13150

R Primary Lithium Battery Expert Primary lithium batteries ER13150 3 .6V 450mAh 3.6V Primary lithium-thionyl chloride (Li-SOCl 2 ) Energy type bobbin cell F or l ow d rain / l ong t e tm operating applications requesting superior voltage response in -55 ~+85 environments. Cell size references Alternative models E lectrical characteristics (typical values relative to cells stored for one year or less at +30 max.) Nominal capacity (at 0.5 mA +20 2.0V cut off. The capacity resto red by the cell varies according to current drain, temperature and cut off). Open circuit voltage (at +20 ) Nominal voltage (at 0.5mA +20 ) 0.45Ah 3.66V 3.6V Pulse capability: Typically up to 20 mA (30 mA/0.1 second pulses, drained every 2 mn at +20 from undischarged cells with 10 A base current, yield voltage readings above 3.0V. The readings may vary according to the pulse characteristics, the temperature, and the cell s previous history. Fitting the cell with a capacito may be recommended in severe conditions. r Consult ABLE) Max. Continuous current Max. Pulse current 10mA 20mA Storage (recommended) (for more severe conditions, consult ABLE) +30 +86 F max -55 / +85 -76 F / +185 F Operating temperature range (Operation above ambient T may lead to reduced cap acity and lower voltage readings at the beginning of pulses. Consult ABLE) Physical characteristics Diameter (max) Height (max) Typical weight Available termination suffix 13mm(0.45 in) 15mm(0.6 in) 5.5g(0.18oz) radial tabs, radial pins, axial leads, flying lea ds Tel:0086 755 29807561/63 Fax:0086 755 29807510 Email:able@able-battery.com website:www.able-battery.com R Primary Lithium Battery Expert Characteristic curves O Discharge performance 25 C E R13150 3 .6V 450mAh V Voltage 5 0.1 3.5 3.0 2.5 2.0 1.5 4.0 3.5 3.0 2.5 2.0 0 1 2 3 4 5 6 7 8 9 10 ***S* 1 0.05 (+) 1 0mA 4mA 0.5mA 100 A 0 .28Ah 0.35Ah 0 .45Ah 0.39 A h 15.0Max 1.0 0.1 1 10 H ours 10 2 10 3 10 4 10 5 13.0Max Capacity VS Current 0.5 20 C O Key features H igh and stable operating voltage Superior drain capability Low self-discharge rate (less than 1% after 1year of storage at +20 ) Optional stainless steel container for low magnetic and nickle plated steel container for more safe design Hermetic glass-to-metal sealing Notch technology for safety vent is recommended Non-flammable electrolyte M ain applications R adiocommunication and other military applications Alarms and security systems Beacons and emergency location transmitters GPS Metering systems Sonobuoys LED lighting applications Others Ah 0.4 72 C O Capacity 0.3 0.2 0.1 0.0 0.01 55 C -30 C O O 0C O 0 .1 Current 1 mA 10 100 Voltage VS Temperature 3 .8 3 .6 3 .4 3 .2 3 .0 2 .8 -60 10 A 0.1mA Storage T he storage area should be clean, cool (not exceeding +30 ), dry and ventilated. Warning D o not use if the battery casing was mangled. Please discharge the battery few minutes with 100mA,if the battery voltage is lower than your need or consult ABLE. Don t use different models of battery in series. Soldering the tag should be finished in few seconds. D o not try to recharge. Voltage V 0.5mA 2 mA -40 -20 T emperature 0 20 40 60 80 Tel:0086 755 29807561/63 Fax:0086 755 29807510 Email:able@able-battery.com website:www.able-battery.com