ESD1000SK

OEM Bluetooth-Serial Module, ESD1000 Features • Bluetooth Specification v2.0 + EDR • Useful for Bluetooth-enabling users’ devices • Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm • Receiving Sensitivity : -88dBm(0.1%BER) • Supports Bluetooth profiles SPP(Serial Port Profile) • External interface for UART • Interoperability with PDA, laptops etc. • Supports firmware upgrade via windows-based software(ParaniUpdater) • Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna • Easy to use Windows configuration tool available. • No external drivers required. Parani-ESD1000 is Class1 type Embedded Bluetooth Module for users to make their devices Bluetooth-enable. By default, it supports 100 meters of wireless transmit distance. The Parani-ESD1000 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification, and external interface UART. Users may configure the Parani-ESD1000 by using easy-to-use Windowsbased utility software or by using standard AT command set. Typical application areas of the Parani-ESD1000 include: - RS232 cable replacement - Truck/Bus monitoring system - Car Diagnostics - Wireless POS system - Wireless Machine(Healthcare/Industrial) monitoring - Wireless Factory monitoring - PLC programming - Wireless Printing - Wireless Logistics Pin Assignment Information Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pin Name GROUND N/A N/A N/A BT_MODE FACTORY RESET LOW_BATT_INDICATOR N/A HW_RESET N/A N/A VCC N/C GROUND GROUND GROUND UART_DCD UART_DSR UART_DTR UART_RXD UART_TXD UART_CTS UART_RTS N/A N/A N/A N/A GROUND GROUND GROUND IN OUT IN OUT IN OUT OUT IN GROUND GROUND GROUND UART DCD(data carrier detect) UART DSR(data set ready) UART DTR(data terminal ready) UART RXD(receive data) UART TXD(transmit data) UART CTS(clear to send) UART RTS(ready to send) Power(3.3V) POWER GROUND GROUND GROUND TTL TTL TTL TTL TTL TTL TTL IN Hardware reset signal(Active ‘L’) TTL IN IN OUT Pairing signal Factory reset signal(Active ‘L’) Low battery status(Active ‘L’) TTL TTL TTL Direction GROUND Description Signal Level GROUND GROUND N/A N/A N/A BT_MODE FACTORY RESET LOW_BATT_INDICATOR N/A HW_RESET N/A N/A VCC N/C GROUND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 GROUND N/A N/A N/A N/A UART_RTS UART_CTS UART_TXD UART_RXD UART_DTR UART_DSR UART_DCD GROUND GROUND www.sena.com OEM Bluetooth-Serial Module, ESD1000 Specifications Serial Interface: - UART - 2mm Header 14 x 2 - Serial UART speed up to 921.6kbps - CTS/RTS flow control, DTR/DSR for loop-back & full transfer Diagnostic LED: Power: - TXD, RXD, RTS, CTS, DTR, DSR, DCD on Jig board - 3.3VDC - Minimum: 10mA, Maximum : 60mA Bluetooth Interface: - Bluetooth v2.0 + EDR - Class 1 - Profiles: SPP - Working distance (in open field) SAT-G01R - SAT-G01R SAT-G01R - DAT-G01R DAT-G01R - DAT-G01R DAT-G01R - DAT5-G01R DAT-G01R - PAT-G01R DAT5-G01R - DAT5-G01R DAT5-G01R - PAT-G01R PAT-G01R - PAT-G01R Environmental: 100 meters 150 meters 200 meters 300 meters 500 meters 400 meters 600 meters 1,000 meters - Operating temperature: -30˚C to 80˚C - Storage temperature: -40˚C to 85˚C - Humidity: 90% Non-condensing Physical properties: - Dimension (L x W x H): 49 x 23 x 11 (mm) 1.93 x 0.9 x 0.43 ( in.) - Weight: 6g MTBF: 400.89 Years Regulatory Approvals: - FCC Part 15 Subpart C Section 15.247 - EN 60950-1: 2001 - ETSI EN 300 328 - ETSI EN 301 489-1 - ETSI EN 301 489-17 - MIC (Type Registration) - TELEC (Type Certification) - SIG [Antennas] SAT-G01R: +1dBi Stub Antenna DAT-G01R: +3dBi Dipole Antenna DAT5-G01R: +5dBi Dipole Antenna PAT-G01R: +9dBi Patch Antenna Max. Tx power: +18dBm Receive Sensitivity: -88dBm Antenna gain: - Stub: +1dBi, Dipole: +3dBi, Dipole: +5dBi, Patch: +9dBi Warranty: - 1-year limited warranty Configuration: - ParaniWin, ParaniWizard, ParaniUpdater - Modem AT command set Parani-ESD1000 Starter Kit The Parani-ESD1000 Starter Kit includes the evaluation board with the sample circuitry for Parani-ESD1000 interface, power, RS232 interface, H/W Reset, LEDs for users’ device development. RS232 SERIAL ON/OFF SWITCH Reserved POWER POWER SWITCH LED(SERIAL) Reserved ESD1000 (INTERFACE) Reserved Ordering Information BT_MODE FACTORY RESET Reserved Reserved Reserved LED (POWER) H/W RESET ESD1000 Parani-ESD1000 OEM Bluetooth-Serial Module-Class1 with antenna extension option ESD1000-00 Optional Accessories : - SAT-G01R Antenna: 1 dBi Stub Antenna- RP-SMA-Reverse right-hand thread - DAT-G01R Antenna: 3 dBi Dipole Antenna-RP-SMA-Reverse right-hand thread - DAT5-G01R Antenna: 5 dBi Dipole Antenna-RP-SMA-Reverse right-hand thread - PAT-G01R Antenna: 9 dBi Patch Antenna-RP-SMA-Reverse right-hand thread - SEC-G01R : 15cm Antenna Extension Cable-RP-SMA-Reverse right-hand thread - RFC-G01R: 1m Antenna Extension Cable-RP-SMA-Reverse right-hand thread for PAT-G01R Tel : +1 (408) 573-7425 Fax: +1 (408) 907-3738 U.S. / Canada / South America EU / Africa Tel : +33 (0) 1 53 53 16 29 Fax: +33 (0) 1 70 24 70 90 ESD1000SK Parani-ESD1000 Starter Kit Includes: Tel : +82-2-571-8283 Fax: +82-2-573-7710 Asia / Pacific - Parani-ESD1000 Module - Jig board - DC Power Adapter - Serial data cable - Quick Start Guide - SAT-G01R Antenna: 1 dBi Stub Antenna- RP-SMA-Reverse right-hand thread - CD-ROM General Information : info@sena.com Sales & Distribution : sales@sena.com Technical Support : support@sena.com Contact us via E-mail For more information, please visit us at http://www.sena.com www.sena.com